Samsung SWA-8500S Bedienungsanleitung

SWA-8500S

USER MANUAL

ENG - 2

Safety Information

Thank you for purchasing this product (SWA-8500S).

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

This symbol indicates that

high voltage is present inside.

It is dangerous to make any

kind of contact with any

internal part of this product.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE THE

COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL

SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates

that important literature

concerning operation and

maintenance has been

included with this product.

Class II product : This symbol indicates that it does not require a safety connection to

electrical earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

•The slots and openings in the cabinet and

in the back or bottom are provided for

necessary ventilation. To ensure reliable

operation of this apparatus, and to protect it

from overheating, these slots and openings

must never be blocked or covered.

– Do not place this apparatus in a conned

space, such as a bookcase, or built-in

cabinet, unless proper ventilation is

provided.

– Do not place this apparatus near or over

a radiator or heat register, or where it is

exposed to direct sunlight.

– Do not place vessels (vases etc.)

containing water on this apparatus.

A water spill can cause a re or electric

shock.

•Do not expose this apparatus to rain

or place it near water (near a bathtub,

washbowl, kitchen sink, or laundry tub, in

a wet basement, or near a swimming pool,

etc.). If this apparatus accidentally gets wet,

unplug it and contact an authorized dealer

immediately.

•Do not overload wall outlets, extension cords

or adaptors beyond their capacity, since this

can result in re or electric shock.

ENG - 3

•Route power-supply cords so that they are

not likely to be walked on or pinched by items

placed on or against them. Pay particular

attention to cords at the plug end, at wall

outlets, and the point where they exit from

the apparatus.

•To protect this apparatus from a lightning

storm, or when it is left unattended and

unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the

set due to lightning and power line surges.

•Before connecting the AC power cord to the

DC adaptor outlet, make sure the voltage

designation of the DC adaptor corresponds to

the local electrical supply.

•Never insert anything metallic into the open

parts of this apparatus. Doing so may create a

danger of electric shock.

•To avoid electric shock, never touch the inside

of this apparatus. Only a qualied technician

should open this apparatus.

•Make sure to plug the power cord in until it is

rmly seated. When unplugging the power

cord from a wall outlet, always pull on the

power cord’s plug. Never unplug by pulling on

the power cord. Do not touch the power cord

with wet hands.

•If this apparatus does not operate normally

- in particular, if there are any unusual

sounds or smells coming from it - unplug it

immediately and contact an authorized dealer

or service centre.

•Maintenance of Cabinet.

– Before connecting other components to

this product, be sure to turn them off.

•Be sure to pull the power plug out of the

outlet if the product is to remain unused or

if you are leaving the house for an extended

period of time (especially when children,

elderly, or disabled people will be left alone in

the house).

– Accumulated dust can cause an electric

shock, an electric leakage, or a re by

causing the power cord to generate sparks

and heat or the insulation to deteriorate.

•Contact an authorized service centre for

information if you intend to install your

product in a location with heavy dust, high or

low temperatures, high humidity, chemical

substances, or where it will operate 24 hours

a day such as in an airport, a train station, etc.

Failing to do so may cause serious damage to

your product.

•Use only a properly grounded plug and wall

outlet.

– An improper ground may cause electric

shock or equipment damage. (Class l

Equipment only.)

•To turn this apparatus off completely, you

must disconnect it from the wall outlet.

Consequently, the wall outlet and power plug

must be readily accessible at all times.

•Do not allow children to hang on the product.

•Store the accessories (battery, etc.) in a

location safely out of the reach of children.

A water spill can cause a re or electric

•

can result in re or electric shock.

ENG - 4

•Do not install the product in an unstable

location such as a shaky self, a slanted oor,

or a location exposed to vibration.

•Do not drop or strike the product. If the

product is damaged, disconnect the power

cord and contact a service centre.

•To clean this apparatus, unplug the power

cord from the wall outlet, and then wipe

the product using a soft, dry cloth. Do not

use any chemicals such as wax, benzene,

alcohol, thinners, insecticide, air fresheners,

lubricants, or detergent. These chemicals can

damage the appearance of the product or

erase the printing on the product.

•Do not expose this apparatus to dripping

or splashing. Do not put objects lled with

liquids, such as vases, on the apparatus.

•Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a re.

WARNING :

•TO PREVENT THE SPREAD OF

FIRE, KEEP CANDLES AND

OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

•To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

Precautions

1. Ensure that the AC or DC power supply

in your house complies with the power

requirements listed on the identication

sticker located on the back of your product.

Install your product horizontally, on a

suitable base (furniture), with enough space

around it for ventilation (7~10 cm).

Make sure the ventilation slots are not

covered. Do not place the unit on ampliers

or other equipment which may become hot.

This unit is designed for continuous use.

To fully turn off the unit, disconnect the AC

plug from the wall outlet.

2. Do not expose the unit to direct sunlight

or other heat sources. This could lead

to overheating and cause the unit to

malfunction.

3. Unplug the Power cord from the AC wall

socket if the unit malfunctions. Your product

is not intended for industrial use. It is for

personal use only. Condensation may occur

if your product has been stored in cold

temperatures. If transporting the unit during

the winter, wait approximately 2 hours until

the unit has reached room temperature

before using it.

4. If the electricity supplied to your home is

rated at 240V AC, use a suitable plug adapter

to connect this unit to your electrical outlets.

plug does not t into your outlet, consult an

ENG - 5

requirements listed on the identication

covered. Do not place the unit on ampliers

socket if the unit malfunctions. Your product

Important Safety Instructions

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below. Keep these operating

instructions handy for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including AV receivers) that

produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug.

A polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third grounding

prong. The wide blade or the third prong

are provided for your safety. If the provided

plug does not t into your outlet, consult an

electrician for replacement of the obsolete

outlet.

10.Protect the power cord from being walked

on or pinched particularly at plugs,

convenience receptacles, and the point

where it exits the apparatus.

11. Only use attachments/accessories specied

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specied by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when moving the cart/

apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightning

storms or when you intend to leave it unused

for long periods of time.

14. Refer all servicing to qualied service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

ENG - 6

Accessories

STANDBY

LINK

Surround Speaker (2EA) Power Cord

Wireless Receiver Module Speaker Cable (2EA)

Specications

Weight

Wireless Receiver Module 0.7 kg

Surround Speaker 0.5 kg

Dimensions (W x H x D)

Wireless Receiver Module 50.0 X 201.3 X 132.0 mm

Surround Speaker 76.2 X 126.9 X 76.2 mm

Operating Temperature Range +5°C to +35°C

Operating Humidity Range 10% ~ 75%

Output Refer to the Owner’s Manual.

Frequency range 20Hz~20KHz

Overall Standby Power Consumption (W) 1.0W

NOTES

– Samsung Electronics Co., Ltd reserves the right to change the specications without notice.

– Weight and dimensions are approximate.

– For more information about the power supply and power consumption, refer to the label attached

to the product.

– Design and specications are subject to change without prior notice.

Open Source Licence Notice

•To send inquiries and requests regarding open sources, contact Samsung via Email

(oss.request@samsung.com).

•

•You will be informed of the administration fee amount before a technician visits.

Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver

•

Insert the grey plug into the grey jack on the Wireless Receiver.

Insert the blue plug into the blue jack on the Wireless Receiver.

•

ENG - 7

Specications

Weight

Wireless Receiver Module

Dimensions (W x H x D)

Wireless Receiver Module

Overall Standby Power Consumption (W) 1.0W

Samsung Electronics Co., Ltd reserves the right to change the specications without notice.

Weight and dimensions are approximate.

Design and specications are subject to change without prior notice.

•

Important Note About Service

•An administration fee may be charged if either

(a) an engineer is called out at your request and there is no defect with the product (i.e. where the

user manual has not been read).

(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user

manual has not been read).

•You will be informed of the administration fee amount before a technician visits.

Connecting the SWA-8500S to a Soundbar

1. Connect the Wireless Receiver Module to 2 Surround Speakers

Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver

Module.

•The speaker cables are colour coded.

SURROUND-LEFT

ID SET

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

SURROUND-RIGHT

SURROUND-LEFT SURROUND-RIGHT

•When connecting the speaker cables to the Wireless Receiver Module, follow these steps:

1. Insert the grey plug into the grey jack on the Wireless Receiver.

2. Insert the blue plug into the blue jack on the Wireless Receiver.

•When connecting the speaker cables to the surround speakers, follow these steps:

1. Match the speaker cable connected to the grey jack to the speaker with the grey label.

2. Match the speaker cable connected to the blue jack to the speaker with the blue label.

3. Insert the red and black coloured ends of each speaker cable into the red and black jacks of

the appropriate speakers.

•The labels are on the backs of the speaker.

ENG - 8

2. Check the standby status after plugging into an electrical outlet

Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless

Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the

Wireless Receiver Module blinks. If the LED does not blink, refer to step 7 on page 10.

ID SET

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

POWER

STANDBY

LINK

STANDBY

LINK

Blue blinking

3. Turn off the Soundbar

Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button

on the main Soundbar unit.

OFF

•The image of the Soundbar may differ from your Soundbar, depending on the model.

Congure “ID SET” using the Soundbar’s remote control

•

Soundbar and the Wireless Receiver

ENG - 9

Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless

Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the

Wireless Receiver Module blinks. If the LED does not blink, refer to step 7 on page 10.

•

4. Congure “ID SET” using the Soundbar’s remote control

Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears

on your Soundbar display.

VOL

SOUNDBAR

ID SET

5 Sec

•The image of the Soundbar may differ from your Soundbar, depending on the model.

5. Turn on the Soundbar

Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on

the main Soundbar’s unit.

•The image of the Soundbar may differ from your Soundbar, depending on the model.

6. Check if the LINK LED is solid blue (connection complete)

STANDBY

LINK

STANDBY

LINK

Blue is On

The LINK LED indicator stops blinking

and glows a solid blue when a

connection is established between the

Soundbar and the Wireless Receiver

Module.

ENG - 10

7. If the SWA-8500S does not connect, take the necessary steps

according to the LED Indicator’s status

LED status Action

LINK (Blue)

On Connected with

the Soundbar -

Blinking Connection

standby status

Check if the Soundbar is turned on

Repeat steps 3 through 6.

STANDBY (Red) On Connection failure

Check if the Soundbar is turned on

1. Press the ID SET button on the back

of the Wireless Receiver Module with

a pen tip for 5~6 seconds until the

LINK LED indicator blinks (in Blue).

ID SET

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

ID SET

5 Sec

2. Repeat steps 3 through 6.

Others -Errors Contact a Samsung Service Centre.

Compatible Models

HW-M360 HW-M369 HW-M450 HW-M460

HW-M4500 HW-M4501 HW-M4510 HW-M4511

HW-M550 HW-M560

•The model list is subject to change without further notice.

•

government ofce, for details of where and how they can take these items for environmentally safe

For information on Samsung’s environmental commitments and product specic regulatory

Andere Handbücher für SWA-8500S

Inhaltsverzeichnis

Sprachen:

Andere Samsung Lautsprechersystem Handbücher

Samsung

Samsung HW-T450 Bedienungsanleitung

Samsung

Samsung Crystal Surround Air Track HW-F750 Bedienungsanleitung

Samsung

Samsung HW-Q900T Montageanleitung

Samsung

Samsung HW-Q930B Montageanleitung

Samsung

Samsung HW-M4500 Bedienungsanleitung

Samsung

Samsung HW-T45C Montageanleitung

Samsung

Samsung Crystal Surround Air Track HW-F450 Bedienungsanleitung

Samsung

Samsung HW-C400 Montageanleitung

Samsung

Samsung HW-MS6500 Bedienungsanleitung

Samsung

Samsung HW-J8510R Bedienungsanleitung

Samsung

Samsung HW-NW700 Bedienungsanleitung

Samsung

Samsung HW-N400/ZA Montageanleitung

Samsung

Samsung HW-J6501R Bedienungsanleitung

Samsung

Samsung Crystal Surround Air Track HW-F750 Bedienungsanleitung

Samsung

Samsung HW-F850 Bedienungsanleitung

Samsung

Samsung TW-J5500 Bedienungsanleitung

Samsung

Samsung HW-Q990C Bedienungsanleitung

Samsung

Samsung HW-KM38 Bedienungsanleitung

Samsung

Samsung HW-R530 Montageanleitung

Samsung

Samsung HW-M360 Bedienungsanleitung

Samsung

Samsung HW-C450 Bedienungsanleitung

Samsung

Samsung MX-T70 Montageanleitung

Samsung

Samsung HW-R550/XL Montageanleitung

Samsung

Samsung HW-C450/ZA Montageanleitung

Beliebte Lautsprechersystem Handbücher anderer Marken

JVC

JVC CA-MXK5R Bedienungsanleitung

LG NB4532B Bedienungsanleitung

JVC

JVC CA-FSH100 Bedienungsanleitung

5Core

5Core Pro Series Bedienungsanleitung

EAW

EAW MQV1394e Bedienungsanleitung

Lynx

Lynx GXR-LA10A Bedienungsanleitung

iLive

iLive ITB066B Bedienungsanleitung

RDX

RDX QuickStation 4 Bedienungsanleitung

Electro-Voice

Electro-Voice S-122 Bedienungsanleitung

Sven

Sven SPS-619 GOLD Bedienungsanleitung

Pioneer

Pioneer CS-7070 Bedienungsanleitung

EAW

EAW UB82e Bedienungsanleitung

Sondpex

Sondpex Active Speaker System and Digital Music... Bedienungsanleitung

JVC

JVC NX-PN7 Bedienungsanleitung

Yamaha

Yamaha NX-A01 - Speaker Sys Bedienungsanleitung

SE Audiotechnik

SE Audiotechnik I-LINE Bedienungsanleitung

Gemini

Gemini WRX-843 Series Bedienungsanleitung

TCL

TCL 6100 Series Bedienungsanleitung