Samsung U6A4 Bedienungsanleitung

English 8/2020. Rev 0.3

LIB System for UPS –U6A4

Installation Manual

(128S)

English 8/2020. Rev 0.3

Read this manual carefully before starting to install the battery system. Keep

these instructions for future reference.

English 8/2020. Rev 0.3

This document contains information that is the property of SAMSUNG SDI Co., Ltd., and provides for the sole

purpose of the installation, operation, and maintenance of products of SAMSUNG SDI Co., Ltd. No part of

this publication is to be used for any other purpose, and it is not to be reproduced, copied, disclosed,

transmitted, stored in a retrieval system, or translated into any human or computer language, in any form, by

any means, in whole or in part, without prior written consent of SAMSUNG SDI Co., Ltd.

Although every possible effort has been made to ensure the accuracy of this document, SAMSUNG SDI Co.,

Ltd. assumes no responsibility for errors that may appear herein. The information is subject to change

without notice.

English 8/2020. Rev 0.3

Important Safety Instructions

English 8/2020. Rev 0.3 i

Important Safety Instructions

Read and follow these instructions!

The following precautions are intended to ensure your safety and prevent property damage. Before installing

this product, be sure to read all safety instructions in this document for proper installation.

DANGER

Failure to comply with the instructions with this symbol may result in a serious accident, causing

death or a severe injury.

WARNING

Failure to comply with the instructions with this symbol may result in a serious accident, causing a

severe injury.

CAUTION

Failure to comply with the instructions with this symbol may result in minor or moderate injury.

NOTICE

Provides information considered important but not hazard-related. The information relates to

property damage.

Important

Indicates valuable tips for optimal installation and operation of the product.

Important Safety Instructions

ii English 8/2020. Rev 0.3

General Instructions

Please be aware that a battery presents a risk of electrical shock including high short-circuit current. Follow

all safety precautions while operating the batteries.

Remove watches, rings, and other metallic accessories.

Use tools with insulated handles in order to avoid inadvertent short circuits.

Wear rubber gloves and safety boots.

Do not put tools or any metal parts on the top of the batteries.

Disconnect charging source and load before connecting or disconnecting terminals.

Use proper lifting means when moving batteries and wear all appropriate safety clothing and equipment.

Batteries must be handled, transported and recycled or discarded in accordance with federal, state, and local

regulations. Do not dispose of the batteries in a fire because they can explode.

Do not open or mutilate the batteries.

Only authorized, trained technicians should perform annual preventive maintenance.

Only qualified personnel who are familiar with the batteries and safety precautions should perform

installation or maintenance of the battery.

Do not allow unauthorized personnel to contact the batteries.

Safety Precautions

The following precautions provide general safety guidelines that should be followed when working with or

near the Energy Storage System (ESS). Complete safety parameters and procedures are site-specific and

should be developed by the customer for the installation site.

Review and refer to all safety warnings and cautions in this manual before installation.

Build a clear, permanent, restricted access area around the system.

Only authorized, adequately trained electrical operators should be able to access the system.

The interior design of this equipment must be considered a “no-go area except for non-qualified personnel

who are familiar with the batteries and safety precautions,”depending on the location. Consult local codes

and applicable rules and regulations to determine permit requirements. If required, mark enclosures

appropriately before beginning work.

Important Safety Instructions

English 8/2020. Rev 0.3 iii

Personnel and Equipment Warnings

Personnel in contact with the battery system should be aware of the following hazards:

WARNING—SHOCK HAZARD

Do not contact system connectors or terminals. Do not open the enclosure doors unless proper lock

out/tag out procedures and related trainings are followed in accordance with the local codes and

regulations.

WARNING—ARC FLASH HAZARD

There is an arc flash hazard associated with all electrical equipment. There is a serious risk of arc flash

relating to any equipment modification (e.g. opening doors). Serious injuries can occur in arc flash

incidents. Appropriate training is required in accordance with local codes and regulations.

WARNING—FIRE HAZARD

Fire may occur under certain fault conditions.

CAUTION—PINCH POINTS

Multiple pinch-points are present in most system components. Be aware that there is a serious risk of

injury while working around and in equipment enclosures.

CAUTION—STATIC SENSITIVE

Electronic appliances can be damaged by electrostatic discharge. Proper handling procedures are

required. Be sure to wear a grounded anti-static wrist strap and to discharge static electricity by touching

a grounded surface near the equipment before touching any system components.

Dangerous Voltages

DANGER

The ESS is powered by multiple power sources. Hazardous voltages may be present in the equipment

even when it does not appear operational. Make sure that you completely understand the cautions and

warnings in this installation manual. Failure to do so may result in serious injury or death. Follow all

manufacturer-published safety procedures.

Electrical equipment can present a risk of electrical shock and can cause arc flash. The following

precautions must be observed when working on or around electrical equipment:

Remove watches, jewelry, rings, and other metallic objects.

Use tools with insulated handles.

Safety clothing and shoes must comply with local codes and regulations.

Important Safety Instructions

iv English 8/2020. Rev 0.3

Lock Out/Tag Out Guidelines

DANGER

Follow all applicable lock out/tag out procedures at all times. Failure to follow proper lock out/tag out

procedures may result in serious injury or death.

With power applied to the ESS, hazardous voltages are present on some components. To prevent

accidental death or injury, do not touch any components within the enclosure unless you are specifically

directed to do so. To reduce the risk of electrical shock, make sure that all equipment is properly

grounded. For more information, refer to 3.1 Grounding the Battery System

WARNING

Enclosure doors must remain closed except when access to the enclosure interior is required. If possible,

personnel should keep a safe distance from enclosures whenever the equipment is energized. Always

comply with local, state, and national lock out/tag out guidelines when working with or near the ESS. The

lock out/tag out procedures must meet or exceed the requirements of all guidelines presented in

SAMSUNG SDI safety documentation. Before entering potentially hazardous areas or beginning work on

the ESS, complete the following tasks:

Identify and wear protective clothing and shoes.

Identify and isolate all power and stored energy sources.

Apply appropriate lock out/tag out devices. When applying lock out/tag out to the ESS, do not touch anything within the

enclosure except as specifically directed in the work procedures.

Complete the site-specific lock out/tag out procedures and safety checklist before beginning work.

General Warnings

DANGER

When energized, this equipment presents a potential hazard of electric shock, death, and burn.

Only authorized personnel who are thoroughly familiar with the equipment and adequately

trained should install, operate, or maintain this equipment.

DANGER

To avoid death, personal injury, or damage to the product, follow all safety procedures as

regulated by Environmental Health and Safety (EHS) guidelines.

DANGER

To minimize the hazards of electrical shock, death, and burns, approved grounding practices and

procedures should be strictly followed.

WARNING

To avoid personal injury and damage to equipment, personnel must adhere to the site protocol

concerning working at heights.

Important Safety Instructions

English 8/2020. Rev 0.3 v

WARNING

To avoid personal injury or equipment damage caused by equipment malfunction, only adequately

trained personnel should modify any programmable machine.

WARNING

Always ensure that applicable standards and regulations are followed and only properly certified

equipment is used as a critical component of a safety system. Never assume that a safety-critical

control loop is functioning correctly.

Important Safety Instructions

vi English 8/2020. Rev 0.3

Inhaltsverzeichnis

Andere Samsung UPS Handbücher

Samsung

Samsung 93PM Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung