Safety information
English4
Critical usage warnings
WARNING
The Microfiberfilteris designed to capture micro plastic fibers
released from clothes during washing and must not be used for other
purposes.
Do not attempt to repair, disassemble, ormodify the Microfiberfilter
yourself. Do not use a fuse (such as copper, steel wire, etc.) other than
a standard fuse.
• When the Microfiberfilterneeds to be repaired or reinstalled,
contact your nearest service center.
• This may result in electric shock, fire, problems with the
Microfiber filter, or injury.
To avoid the risk of electric shock and fire, plug the power plug into
the wall socket firmly. Do not use a damaged power plug, damaged
powercord, orloosewall socket. Unplug the power plugwhen the
Microfiberfilteris not being used for long periods of time orduring a
thunder or lighting storm.
• Do not install the Microfiberfilterin a RVs (recreationalvehicles),
ships, airplanes.
Keep the Microfiberfilter away from children or pets.
Unplug the powerplug when the Microfiberfilteris not operating.
Do not press the buttons using sharp objects such as pins, knifes,
fingernails, etc.
• This may result in electric shock orinjury.
If the Microfiberfiltergenerates a strange noise, a burning smell, or
smoke, unplug the power cord immediately and contactyournearest
service center.
Do not remove the mesh filterwhile the Microfiber filteris operating.
Water may overflow.
Critical cleaning warnings
WARNING
When the Microfiberfilteris contaminated by a foreign substance
such as detergent, dirt, food waste, etc., unplug the power plug and
clean the Microfiberfilterusing a damp, soft cloth.
• Do not clean the Microfiberfilter byspraying waterdirectlyonto
it. Do not use benzene, thinner, or alcohol, to clean the Microfiber
filter. Do not use a strong acidic cleaning agent.
• It may cause discoloration, deformation, product damage,
rusting, electric shock, orfire.
Before cleaning or performing maintenance, unplug the Microfiber
filterfrom the wall socket.
• This may result in electric shock orfire.
Instructions about the WEEE
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
(Applicable in countries with separate collection
systems)
This marking on the product, accessories or literature
indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be
disposed of with otherhouseholdwaste at the end
of theirworking life. To prevent possible harm to the
environment orhuman health from uncontrolled waste
disposal, please separate these items from other types
of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact eitherthe retailer
where they purchased this product, ortheirlocal
government office, for details of where and how they
can take these items for environmentallysafe recycling.
Business users should contact theirsupplier and check
the terms and conditions of the purchase contract. This
product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
Forinformation on Samsung’s environmental commitments and
product regulatory obligations, e.g. REACH, WEEE or Batteries, visit
our sustainability page available via www.samsung.com
Product disposal in France
Points de collecte sur www.quefairedemesdechets.fr
REPRISE
À LA LIVRAISON À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU OU
FR
Cet appareil
et ses accessoires
se recyclent
Declaration of conformity
Hereby, Samsung declares that this radio equipment is in compliance
with Directive 2014/53/EU andwith the relevant statutory
requirements in the UK. The full text of the EU declaration of
conformity and the UK declaration of conformity is available at the
following internet address: The official Declaration of conformity may
be found at http://www.samsung.com, go to Support > Support home
and enterthe model name.
• Wi-Fi max transmitterpower: 20 dBm at 2.412 GHz – 2.472 GHz
Turning on Wi-Fi (fornetwork models
only)
Turning onWi-Fi consumes more energy. Underan environment
where Wi-Fi is frequentlyturned on, actual energy consumption can
be greaterthan the values in the specification sheet section.
1. Tap and hold to Filter Reset button for 7 seconds to turn onWi-Fi.
2. The Microfiberfilterenters AP mode and connects to your
smartphone.
3. On your smartphone, tap Select to connect the Microfiber filter
to your smartphone.
4. Once the connection process is complete, the Microfiberis
successfully connected to your smartphone.
DC68-04471B-00_IB_FT-MF_EU_EN_DE_NL_FR_IT_ES_PT_DA_FI_NO_SV_PL_HU_EL_RO_BG_LT_LV_ET_CS_SK_HR_TR.indb 4 2023-06-07 5:52:06
