San Jamar C3400C Bedienungsanleitung

Rotate adjustment ring in

smaller increments until

one-at-a-time dispensing is

achieved.

STAINLESS STEEL CUP DISPENSER

Thank you for choosing the Stainless Steel Cup Dispenser from San Jamar.We appreciate your business and are

condent that this NSF certied cup dispenser will improve the image and efciency of your operation. Enjoy!

Remove dispenser from

mounting ange by rotating

dispenser counter-clockwise.

Remove dispenser from mounting ange by rotating dispenser

counter-clockwise.

Rotate adjustment ring until

cups are secure.

Release locking tabs of trim ring

by applying pressure to tabs

from inside the cup dispenser

with a athead screwdriver to

disengage

Once all three tabs are

disengaged, lift upward on the

trim ring to remove.

Disassembly continued on

reverse side.

Loosen the thumbnut using

either a athead screwdriver

or a dime.

Insert desired cups that fall

within adjustment range.

Remove the pusher: the

pusher will slide out by tilting

the dispenser.

Remove the end cap and spring of the dispenser by depressing the

exposed tabs and rotating the cap to pull outward – the spring will

come along with the end cap.

Tighten thumbnut to maintain

dispensing adjustment using

either a athead screwdriver

or a dime.

ADJUSTING THE DISPENSER

1a. 2a. 2b.1b.

5. 6.

4. 5.

2. 3.

DISASSEMBLY

San Jamar

555 Koopman Lane

Elkhorn, Wisconsin 53121

USA

T: +1.262.723.6133

F: +1.262.226.8664

[email protected]

www.sanjamar.com

Europe

Schoorstraat 26a, bus 1

2220 Heist-op-den-Berg

BELGIUM

T: +32 15 22 81 40

F: +32 15 22 81 48

emea@sanjamar.com

México

Av. Paseo de la Reforma No. 350 - 10

Col. Juarez

Deleg. Cuauhtemoc, CP 06600

MEXICO, D.F.

T: +52 (55) 3626 0772

mexico@sanjamar.com

Canada

3280 Bloor Street West

Suite 1140

11th Floor, Centre Tower

Toronto, ON M8X 2X3

CANADA

T: +1.262.723.6133

F: +1.262.226.8664

canada@sanjamar.com 103391_RevA©Copyright San Jamar 2018

Remove all three adjustment clips by lifting and pulling the clip from

the dispenser tube.

Remove the thumbnut that is

located on the underside of

the adjustment ring using a

athead screwdriver or a dime.

Remove adjustment ring

by lifting up and over the

dispenser tube.

6a.

1a.

7a.

2a.

7a.

6b.

1b.

7b.

2b.

7b.

DISASSEMBLY CONTINUED

REASSEMBLY

Attach adjustment ring by dropping trim

ring around the dispenser tube; ensure

that the post for the thumbnut is aligned

with opening on adjustment ring.

Apply downward pressure to

attach trim ring. When properly

aligned, the trim ring will snap

into place inside the dispenser.

Tighten thumbnut with a

athead screwdriver or a dime

to secure the adjustment ring.

Insert the pusher. Insert both the spring and

end cap.

Align trim ring & locking tabs

with the slots on the dispenser

tube.

Insert adjustment clips by threading them into the

slots on the body of the tube. When fully inserted they

should appear as pictured.

Insert assembled dispenser back into installed mounting ange and

rotate clockwise to secure unit.

4. 5. 6.3.

Andere San Jamar Spender Handbücher

San Jamar

San Jamar SN46 Bedienungsanleitung

San Jamar

San Jamar FRONTLINE Bedienungsanleitung

San Jamar

San Jamar TEAR-N-DRY Bedienungsanleitung

San Jamar

San Jamar EZ-Fit Service-Handbuch

San Jamar

San Jamar Tear-N-Dry Essence Bedienungsanleitung

San Jamar

San Jamar Tear-N-Dry Essence Bedienungsanleitung

San Jamar

San Jamar EZ-Fit Lid L2200C Handbuch

San Jamar

San Jamar VENUE H2003 Series Bedienungsanleitung

San Jamar

San Jamar VENUE H5000PTBK Bedienungsanleitung

San Jamar

San Jamar Venue Bedienungsanleitung

San Jamar

San Jamar C2410C Bedienungsanleitung

San Jamar

San Jamar Arriba TWIST Solaire Bedienungsanleitung

San Jamar

San Jamar Rely Hybrid Bedienungsanleitung

San Jamar

San Jamar SN30 Bedienungsanleitung

San Jamar

San Jamar Venue Bedienungsanleitung

San Jamar

San Jamar Smart Essence T8400TBK Bedienungsanleitung

Beliebte Spender Handbücher anderer Marken

Silver King

Silver King Majestic SK12MAJ Kurzanleitung

Franke

Franke F3Dn Twin Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Bedienungsanleitung

DAN DRYER

DAN DRYER 282 Bedienungsanleitung

Essity

Essity Tork 473208 Bedienungsanleitung

CBS

CBS SD300BU-88 Einrichtungshandbuch

Sealey

Sealey MK77 Bedienungsanleitung

Fluid Management

Fluid Management Accutinter 1600 Bedienungsanleitung

Franke

Franke DVS SD99-010 Bedienungsanleitung

Graco

Graco Dispensit 1053-10C Fehlerbehebungshandbuch

ITALTINTO

ITALTINTO i50 Bedienungsanleitung

Coca-Cola

Coca-Cola FREESTYLE 9000 Bedienungsanleitung

Graco

Graco ProMix 2KE Bedienungsanleitung

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Bedienungsanleitung

Wayne

Wayne GLOBAL VISTA CNG Bedienungsanleitung

clarsen

clarsen H133 Bedienungsanleitung

PicoBrew

PicoBrew Zymatic Bedienungsanleitung

BOWMAN

BOWMAN BP-007 Bedienungsanleitung