Sandberg USB DigiTV Bedienungsanleitung

ENGLISHDANSKNORSKSVENSKASUOMI

Sandberg USB

DigiTV

[

Item no.

133-41

] Rev. 26.06.07

System requirements:

• Minimum Pentium PC III/4 1GHz or compatible

• 256 MB RAM or above

• 1 available USB port

• 1 GB free Hard drive space

• CD-ROM drive or Internet connection

ENGLISH

Introduction

You can use Sandberg USB DigiTV to watch digital TV on your computer anywhere there is a

digital TV signal. This means your system is future proof, because the TV transmission network

is changing over to digital TV for much better picture quality than the old analogue standard. A

remote control is included to make it easy and convenient to use your computer as a digital TV.

The software supplied with the package provides a range of great functions like teletext, electronic

programme guide (EPG) and timeshifting.

1 Installing the adapter

1.1 Installation in Windows

: Do not connect the adapter yet.

1. Start Windows.

2. Insert the CD provided.

3. The setup program launches. Click [

Install

4. Click [

], [

Yes

5. Fill in the white ﬁ elds with your name, company and serial number. Click [

(You will ﬁ nd the serial number on the packaging for the CD provided.)

6. Click [

] twice. Click [

Finish

7. Connect the adapter to your computer’s USB port.

8. Windows will install the driver for the adapter automatically.

9. Restart your computer.

The adapter is now installed and ready for use.

2 Adapter setup

2.1 Connecting the aerial

The aerial provided can be connected directly to the adapter. If a different aerial is used, the

adapter provided must be used.

2.2 Aerial location

The aerial provided should be positioned with space around it, preferably close to windows and

fairly high up. The best position is obtained by securing the aerial horizontally to a metal structure.

This can be done by making use of the magnet already in the base of the aerial.

If reception is very poor, check the reception conditions for where you live with your local digital TV

provider. Not everywhere has good enough reception for an indoor aerial to work well.

3 TV Jukebox

3.1 The ﬁ rst time you start TV Jukebox

TV Jukebox is for when you are going to watch TV. It also has lots of extra functions like EPG,

Timeshifting (See section 3.2.8) and a record function.

The ﬁ rst time you start the application, you need to create a list of TV channels:

1. Start TV Jukebox by double-clicking on the TV Jukebox icon on the desktop.

2. The application informs you that ”

Channel list ﬁ le does not exist.

” Click [

3. Under ”

Region Scan

”, you select the country you are in.

4. Click [

Start Scan

5. When the scan is complete and the TV channels available have been found, click on [

(If the application does not ﬁ nd any TV channels, see section 3.2.4.)

TV Jukebox is now ready for use.

ENGLISH

3.2 Using TV Jukebox

1: Start/stop the application

2: Teletext

3: EPG – Electronic programme guide

4: List of scheduled recordings

5: Setup of TV channels

6: Program setup

7: Still captures

8: Channel list

9: Forwards/rewind/back to last viewed channel

10: Playback/stop/pause/record and Timeshift

11: Media library

12: Numerical keypad

13: Help/mini-mode/minimise

14: Volume control

15: Display

3.2.1 Teletext

Teletext opens in a separate window and works in the same way as on a normal TV. Simply enter

the number of the page you want to see.

ENGLISH

3.2.2 EPG – Electronic programme guide

With EPG you can see a programme list for the different channels. You also have the option of

scheduling programmes to record.

Selection/Channel

This is where you can deﬁ ne what the programme list will display.

Scan EPG Information

This updates the programme list.

Set to Current Channel

This sets the programme list to the current channel.

Set to today

This sets the programme list to show only today’s programmes.

In the right-hand ﬁ eld you have an option to display the programmes for other days.

Programme list

This displays a list of the different programmes being broadcast.

Set to record

Select the programme you want to record in the programme list and click on this button to save it

under scheduled recordings.

This closes the window.

ENGLISH

3.3.3 List of scheduled recordings

Here you can see a list of the recordings you have scheduled.

You can also create a new manual recording.

Add

If you want to add a recording manually, click on one of the channels to the left.

Then enter Date, starting time (

Start

Start), Start

Duration

and

Description

before clicking [

Add

Update

If you want to edit a scheduled recording, click on the recording in question. Then edit the date,

starting time, duration and description, and click [

Update

Delete

If you want to delete a scheduled recording, click on the recording and then click [

Delete

This closes the window.

ENGLISH

3.2.4 Setup of TV channels

It may be necessary to ﬁ nd the channels again if you are using the adapter and want to watch TV

from a different location.

Region Scan

Here you can select the country are in. The frequency range and bandwidth are then set automati-

cally.

All Scan

If the country selected is not found in ”

Region Scan

”, you can search through all the frequencies

and bandwidths here.

Range Scan

Here you can select which frequency range the application will scan.

Single Scan

If you only want to scan one frequency, this can be done here.

Channel list

The channels that have been found are displayed here. You can create several different lists so that

you do not need to scan the channels each time you visit the holiday cottage for example.

ENGLISH

3.2.5 Program setup

In program setup you can change the adapter settings.

Still capture/Picture Size

Here you can select whether the still captures you take are to be saved as jpg or bmp ﬁ les.

: jpg ﬁ les compress the image quality, thus taking up less space on the hard disk; bmp ﬁ les

maintain a higher quality, but take up more room on the hard disk.

Default Folder

Here you can select where the still captures and recordings you make are to be stored.

On Screen Display

Tick or untick the box according to whether or not you want program information displayed directly

on the screen.

Record TS Data (Subtitle and Teletext)

You must activate this function if you want your recordings to have subtitles.

Color

You can set the brightness, contrast, etc. under the Color tab.

3.2.6 Still captures

Still captures can be taken by clicking on the [

Still captures

] button. As soon as the picture has

been taken it will be displayed in the Media library (see section 3.2.9 below). You can bring up the

picture by double-clicking on it in the Media library.

3.2.7 Recording

Programmes can be recorded in two ways. You can choose to simply use the record button.

Click on the button when you want to start recording, and click on stop when you want to stop

recording. If you do not want to start the recording there and then, you can schedule the recording

instead (see section 3.2.3). Both methods require you to have the application open.

ENGLISH

3.2.8 Timeshift

This function is used to pause your TV. You can press this button in the middle of a live pro-

gramme. The programme will be paused and recorded at the same time. To restart the live pro-

gramme, click on the playback button. By clicking the forwards button you can also catch up with

where the programme has got to.

: Recordings with Timeshift will not be saved in the Media library.

3.2.9 Media library

Under Media library you will ﬁ nd all the still captures and recordings that you have made. You can

delete these by highlighting a ﬁ le and clicking on the dust bin on the right. Then conﬁ rm that you

want to delete the ﬁ le.

All still captures and recordings can also be found in the location you have chosen under program

setup (see section 3.2.5).

4 Remote control

TV Jukebox can be controlled using the remote control provided. At the top of the adapter itself

there is an infrared sensor which receives the signal from the remote control. Make sure that the

adapter is located so that the remote control’s infrared light can reach the sensor on the adapter. To

make this easier, you can use the USB extension cable provided, which means the adapter can be

positioned practically in relation to the infrared signal of the remote control.

1: Start/stop TV Jukebox

2: Open electronic programme

guide (EPG)

3: Open teletext (if available)

4: Return button

5: Full screen on/off

6: Select soundtrack (if available)

7: Freeze frame

8: Subtitles on/off

9: Channel selector up/down

10: Volume adjustment up/down

11: Mute on/off

12: Numerical keypad

13: Timeshift

14: Record

15: Playback

16: Stop

17: Pause

ENGLISH

5 Troubleshooting

If TV Jukebox cannot ﬁ nd any TV channels when it scans, you should check the following:

• That the aerial has been connected correctly.

• That the correct country has been chosen under ”

Region Scan

” (see section 3.2.4).

• That there is sufﬁ cient coverage in your area (contact your local digital TV provider).

If there are no subtitles on your programme, you should check the following:

• That the programme is meant to have subtitles. Not all programmes are broadcast with subtitles.

Not all channels subtitle their programmes.

• That the subtitle function has been activated. You can do this by right-clicking on the screen and

selecting ”

subtitle

”. You can then select the subtitle language of your choice.

• That the signal reception is good. When reception is poor the data used for subtitles may not

come through properly.

If the reception quality is poor or stuttering, you should check the following:

• That the signal reception is good.

• That your computer has sufﬁ cient room on its hard disk to store the programmes you are

recording.

• That your computer complies with the system requirements (see the section “

Introduction

”).

If you need further help or assistance in connection with your Sandberg product, you will ﬁ nd

details about this on the penultimate page of this user guide.

Have fun with your Sandberg USB DigiTV!

DANSK

Introduktion

Sandberg USB DigiTV gør dig i stand til at se digital-TV på din computer hvor som helst, hvor der

er et digitalt TV signal. Dermed er du fremtidssikret, da TV sendenettet skifter til digital-TV, der

giver et langt bedre TV-billede end den gamle analog standard. Den medfølgende fjernbetjening

gør det let og komfortabelt at bruge computeren som digital-TV. Softwaren, som også følger med i

denne pakke, giver mange lækre funktioner så som tekst-tv, elektronisk TV guide (EPG) og tidsfor-

skydning af TV programmer (Time shifting).

1 Installation af adapteren

1.1 Installation i Windows

Bemærk

! Tilslut ikke adapteren endnu.

1. Start Windows.

2. Indsæt den medfølgende CD.

3. Installationsprogrammet starter. Klik [

Install

4. Klik [

], [

Yes

5. Udfyld de hvide felter med navn, ﬁ rma og serie nummer. Klik [

(Du ﬁ nder serienummeret på emballagen til den medfølgende CD).

6. Klik [

] to gange. Klik [

Finish

7. Tilslut adapteren til computerens USB-port.

8. Windows installerer automatisk driveren til adapteren.

9. Genstart computeren.

Herefter er adapteren installeret og klar til brug.

2 Opsætning af adapteren

2.1 Tilslutning af antenne

Den medfølgende antenne kan sluttes direkte til adapteren. Ved brug at en anden antenne skal den

medfølgende adapter bruges.

2.2 Placering af antenne

Den medfølgende antenne bør placeres med plads omkring den, gerne tæt på vinduer og et stykke

oppe i luften. Den bedste placering fås ved at sætte antennen vandret fast på en metalstruktur.

Dette kan gøres vha. den påmonteret magnet i bundet af antennen.

Er modtagelsen meget dårlig, bør du checke modtageforholdene på din bopæl med den lokale

Digital TV udbyder. Det er ikke alle steder, at forholdende er gode nok til en indendørs antenne.

3 TV Jukebox

3.1 Første gang du starter TV Jukebox

TV Jukebox skal bruges, når du skal se TV. Det rummer også mange ekstrafunktioner som EPG,

Timeshifting (Se afsnit 3.2.8) og optagefunktionen.

Første gang du starter programmet, skal du oprette en liste med TV-kanaler:

1. Start TV Jukebox ved at dobbeltklikke på ikonet TV Jukebox på skrivebordet.

2. Programmet meddeler ”

Channel list ﬁ le does not exist.

” Klik [

3. Under punktet ”

Region Scan

” vælger du landet, du beﬁ nder dig i.

4. Klik [

Start Scan

5. Når scanningen er færdig, og de tilgængelige TV-kanaler er fundet, klikkes [

(Finder programmet ingen TV-kanaler, se afsnit 3.2.4)

TV Jukebox er nu klar til brug.

Inhaltsverzeichnis

Sprachen:

Andere Sandberg TV-Tuner Handbücher

Sandberg

Sandberg 134-01 Bedienungsanleitung

Beliebte TV-Tuner Handbücher anderer Marken

KWorld

KWorld PE310SE Bedienungsanleitung

COMPRO

COMPRO M505 - STARTUP Bedienungsanleitung

Genius

Genius TVGo DVB-T31 Bedienungsanleitung

Zinwell

Zinwell ZAT-332 Bedienungsanleitung

RGBlink

RGBlink TAO 1mini-HN Bedienungsanleitung

TViX

TViX PVR R-2200 Bedienungsanleitung

Xavix

Xavix Xavixport Bedienungsanleitung

Peak

Peak NET-TV Bedienungsanleitung

Fracarro

Fracarro SAF-HD 10 Bedienungsanleitung

Eonon

Eonon E0770 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-NOVA-T-Stick Bedienungsanleitung

Digital Devices

Digital Devices Octopus Net Bedienungsanleitung

Gericom

Gericom USB 2.0 DVB-T Tuner Bedienungsanleitung

ADS Technologies

ADS Technologies PTV-334 Bedienungsanleitung

Manta

Manta DVBT013T2 Bedienungsanleitung

Kenwood

Kenwood KTC-D500E Bedienungsanleitung

AVIWEST

AVIWEST DMNG PRO 100 Bedienungsanleitung

Abode

Abode IP Streaming Camera Bedienungsanleitung