SanDisk Sansa SDMX1 1GB Bedienungsanleitung



Contents

1. Quick Start 1

Features 1

What You Need to Begin 2

Installing the Battery 2

The Basic Controls 4

Play Music 5

Listen to the FM Radio 7

Record Notes and Meetings 8

2. Playing Music 9

Connecting and Disconnecting 9

Using the Music Controls 9

Listening to Music 10

Organizing and Transferring Music 11

Creating Playlists 11

Deleting Music 11

Adjusting Settings 12

3. Listening to the FM Radio 14

Using the FM Radio Controls 14

Finding a Radio Station 15

Switching Between Normal and Preset Modes 15

Setting Preset Stations Automatically 16

Setting Stereo and Mono Modes 16

Save a Radio Station as a Preset 16

Delete a Preset Radio Station 17

4. Recording Notes and Meetings 18

Using the Recording Controls 18

Start a Recording 19

Pause a Recording 19

Playback a Recording 19

Delete a Recording 20

5. Navigating the Software Menus 21

6. Tips and Troubleshooting 27

7. Learn More, Service, and Warranty Information 28

8. Safety Tips and Cleaning Instructions 30

Quick Start `1

This chapter helps you get started quickly playing

music, listening to the FM radio, and voice

recording with your SanDisk Digital Audio Player.

Quick Start

Congratulations on your purchase of a SanDisk Digital Audio Player! This chapter will help you

to become familiar with your new purchase as quickly as possible.

Features

Your Digital Audio Player is a full-featured music and recording device that can be carried with

you anywhere.

Plays MP3, WMA and WMA with Digital Rights Management (DRM) support.

Use the built-in microphone to capture notes and meetings.

The indigo graphic LCD display supports English (the default), German, Spanish,

French, Italian, Portuguese, Dutch, Finnish, and Norwegian. Also supports Traditional

Chinese, Simplified Chinese, Japanese, and Korean.

The digital FM radio offers both area setting and sensitivity settings so you can access

radio stations around the world. The radio also allows you to preset up to 20 of your

favorite radio stations.

With 6 equalizer types for the FM radio and music player, you can play music optimized

by type of music, for example, Normal, Rock, Jazz, Classic, Pops, and User-Defined.

Allows you to store and browse your music in folders, as well as the ability to copy,

move, or delete those files. You also can browse your music while in Play mode or Stop

mode.

Onscreen menus are tabbed so that you can easily check your music settings as you

play music, listen to the FM radio, or record notes or meetings.

Select a start point and an end point within an audio file so you can play that segment

over and over. This can be helpful for learning languages, for example.

USB 2.0 support is built-in for faster connections to your computer.

Quick Start `2

Up to 15 hours of continuous playback using one AAA battery (included).

Musicmatch software is included to help organize your music.

Includes a carrying case, earphones, and an armband.

What You Need to Begin

To use your Digital Audio Player, you must have a computer with these features:

One of these operating systems: Windows 98SE, ME, W2K, XP, Mac OS 9.2x (or

higher), or Mac OS 10.2 (or higher).

Intel Pentium PC or equivalent or a Macintosh computer.

Handles MP3, WMA, and WMA DRM music files.

CD-ROM drive.

USB 2.0 port.

In addition, confirm that you have these items in the product packaging that contained your

SanDisk Digital Audio Player:

Your new Digital Audio Player

Earphones

Armband

AAA battery

USB 2.0 cable

CD with Musicmatch Jukebox software, User Guide, and Windows 98SE driver

One page Quick Start Guide

Installing the Battery

You will need to install the AAA battery included with your player. Follow these steps as shown

in Figure 1:

1. Turn your player over, so the backside faces up, and locate the battery door.

2. Firmly push the battery cover down and out towards the outside edge of your player

until you hear a snap. There is a directional arrow on the battery cover to help you.

3. Swing back the battery cover.

4. Push the battery down into the battery area of the player, placing the smooth

bottom of the battery against the spring in the battery area. The protruded top of the

battery slips down and under. The battery should fit snugly.

Quick Start `3

5. Swing the battery cover over the battery, and then push the cover towards the

center of the player until you hear a snap and the cover closes tight.

Step 1

Step 2

Step 3

Figure 1. Installing the AAA Battery

Quick Start `4

The Basic Controls

Your player has a small set of controls that provide a wide range of functionality. To get

started, however, you only need to understand the basic controls shown in Figure 2.

The control names and their functions are described in Table 1.

Table 1: Control Names and Functions

Control Name Function

◄◄ Left Button Press to Rewind or Move Backward

►► Right Button Press to Fast Forward or Move Forward

▲Up Button Press to move up, for example, to increase the volume or

move the selector to a music file up higher in a list

▼Down Button Press to move down, for example, to lower the volume or

move the selector to a music file lower down in a list

Select Button Press down to select a choice or to access screen menus

Play/Stop Play/Stop Button Press to play, stop, or turn your player on

Figure 2: The Basic Controls

Quick Start `5

Control Name Function

Rec Record Button Press to record from the built-in microphone

A-B Change Mode Button Press to change modes, for example, between music, FM

radio, and record modes

Hold Lock/Unlock Button Slide to lock or unlock the player

USB USB Port Connect USB cable from player to your computer

Microphone Built-in Microphone Built-in microphone for recording

Earphone Earphone Port Connect earphones to listen to the player

To learn advanced information about what onscreen menus appear when you select these

controls, see the Navigating the Software Menus chapter that begins on Page 21.

Play Music

To play music files in MP3 and WMA formats, you need to upload music to your player then

use the controls to play your music files.

Upload Music

The first step to playing music is to upload files from your computer to your player. Follow

these steps:

1. Use the USB connector cable provided with your player to connect the USB port on

your player to an open USB port on your computer. The player will appear as a new

hard drive on your computer. (Can’t find the USB port on your player? See The Basic

Controls section on page 4.)

2. Drag your music files to the player or save music files to your player with software

tools like Musicmatch, the same way you save files on your hard drive from

Microsoft Word or other applications.

TIP: Because it appears and acts like a hard drive connected to your computer, you can

use your computer file browser to create folders and move music files on your player.

This can help make it easier to organize and find music on your player.

Play Music Files

Once you have uploaded music files, follow these steps:

Quick Start `6

1. Press the Play/Stop button for two seconds. The SanDisk Welcome message will

appear onscreen for a moment then disappear. (Can’t find the Play/Stop button on

your player? See The Basic Controls section on page 4.)

WARNING: If the onscreen message says “Key Hold” and then shuts off, you

need to locate the Hold button on the side of your player. Slide that button

towards the Play/Stop button to unlock your device. Then repeat Step 1 above.

See The Basic Controls section on page 4 if you cannot find the Hold button.

NOTE: If you do not see music files onscreen, press the A-B Change Mode button

on the side of your player. (See The Basic Controls section on page 4 to find the

Change Mode button.) The Mode Menu will appear. Use the Left or Right buttons

to move left or right to highlight the Audio Play mode. Press the Select button once

to select Audio Play mode.

2. A list of your music files will display onscreen. Press down once on the Select

button. The file selector will highlight your first music file. (Can’t find the Select

button on your player? See The Basic Controls section on page 4.)

3. Press the Up or Down buttons to move the selector up or down in your list of files.

Press the Left or Right buttons to move between folders.

4. Press down once on the Select button to select a music file to play.

5. Briefly press the Play/Stop button to play your selected song. To stop the music,

briefly press the Play/Stop button again. Once your selected music has played, your

player will play each music file below that music file, one after another.

6. To change the volume of your music as it plays, press the Up or Down buttons.

7. To stop playing music, you have three choices:

Press the Play/Stop button until the SanDisk Goodbye screen appears

Navigate to another song, select it, then start to play that song

Press the A-B Change Mode button to switch to FM Radio or Record mode.

Once your music starts to play, you can use the player buttons to:

Skip backwards or forwards to the next song by pressing once on the Left button

(backwards) or Right button (forwards).

Want to switch to another song while music is playing? Press the Play/Stop button to

pause your current song. Press the Up or Down buttons to move up or down through

your music files. Press the Left button or Right button to move up or down file folders.

When your new song is highlighted, press the Select button to choose it. Then press

the Play/Stop button to play your newly selected music file.

Quick Start `7

To learn more about how to play music with your player, see the Playing Music chapter that

begins on Page 9.

Listen to the FM Radio

Follow these steps:

1. Press the Play/Stop button for two seconds. The SanDisk Welcome message will

appear onscreen for a moment and then disappear. (Can’t find the Play/Stop button

on your player? See The Basic Controls section on page 4.)

WARNING: If the onscreen message says “Key Hold” and then shuts off, you

need to locate the Hold button on the side of your player. Slide that button

towards the Play/Stop button to unlock your device. Then repeat Step 1 above.

See The Basic Controls section on page 4 if you cannot find the Hold button.

NOTE: If you do not see the radio onscreen, press the A-B Change Mode button

on the side of your player. (Can’t find the Change Mode button on your player?

See The Basic Controls section on page 4.) The Mode Menu will appear. Use the

Left or Right buttons to move left or right until the FM Radio mode is highlighted.

Press the Select button once to select the FM Radio mode.

2. The radio has two modes to access stations: Normal and Preset. To change

modes, press the Select button briefly. The Preset mode allows you to store up to

20 of your favorite radio stations in the player’s memory.

3. To change stations, press the Left button or Right button to move up or down the

radio dial. Hold down either of these buttons to scan radio stations. In Preset mode,

you scan preset stations. In Normal mode, you scan by increments in the radio

spectrum.

4. To raise or lower the volume of the radio, press the Up or Down buttons.

5. To stop playing the FM radio, you have two choices:

Press the Play/Stop button until the SanDisk Goodbye screen appears

Press the A-B Change Mode button to switch to Audio Play or Record mode.

Once your radio starts to play, you can use the player buttons as follows:

To store only stations with strong signals as preset channels, press the A-B Change

Mode button for two seconds.

Press the Play/Stop button to switch between stereo and mono.

In Preset mode, press the Record button for two seconds to delete a preset channel.

Quick Start `8

For more information about how to use the FM radio, see the Listening to the FM Radio

chapter that begins on Page 14.

Record Notes and Meetings

Follow these steps:

1. Press the Play/Stop button for two seconds. The SanDisk Welcome message will

appear onscreen for a moment then disappear

WARNING: If the onscreen message says “Key Hold” and then shuts off, you

need to locate the Hold button on the side of your player. Slide that button

towards the Play/Stop button to unlock your device. Then repeat Step 1 above.

See The Basic Controls section on page 4 if you cannot find the Hold button.

NOTE: If you do not see the Voice Record interface onscreen, press the A-B

Change Mode button on the side of your player. (See The Basic Controls section

on page 4 to find the Change Mode button.) The Mode Menu will appear. Use the

Left or Right buttons to move left or right to highlight the Voice Record mode.

Press the Select button once to select the Voice Record mode.

2. Press the Record button once on the side of your player to start recoding. Point the

built-in microphone towards you or the source you want to record.

3. To pause your recording, press the Play/Stop button once. To resume recording,

press the Play/Stop button again.

4. To stop recording, press the Record button.

In addition to recording, in Voice Record mode you can do as follows:

To access a recording, press the Select button. Use the Up button or Down button to

move from file to file until the file you want is highlighted. Press the Play/Stop button to

play the selected recording.

To play your current recording while it is paused, press the Play/Stop button. When you

have finished listening, press the Record button to start recording again.

Save your recordings to your computer, connect to your computer with the USB

connector cable and use your computer file browser to move your recordings to your

hard drive. You can delete recordings on your player and free up space the same way.

For more information about how to use the recording features, see the Recording Notes and

Meetings chapter that begins on Page 18.

Playing Music `9

This chapter helps you get started playing music

on your SanDisk Digital Audio Player.

Playing Music

Your player can play music files stored in MP3 and WMA formats. This chapter shows you how

to upload and play your music files.

Connecting and Disconnecting

Your player includes a USB connection cable so that you can transfer music files from your

computer to your player. The small end fits into the USB port at one end of your player. The

larger flat end connects to the USB port on your computer.

To play music, first upload files from your computer to your player. Follow these steps:

1. Use the USB connector cable provided your player to connect the USB port on your

player to an open USB port on your computer. The player will appear as a new hard

drive on your computer. (Can’t find the USB port on your player? See The Basic

Controls section on page 4.)

2. Drag your music files to the player or save music files to your player with software

tools like Musicmatch, the same as you save files on your hard drive from Microsoft

Word or other applications.

Using the Music Controls

Your player has three modes of operation: Audio Play for music, FM Radio for radio, and Voice

Record to record notes and meetings. To play your MP3 and WMA files, you need to be in

Audio Play mode. Follow these steps:

1. Press the Play/Stop button for two seconds. The SanDisk Welcome message will

appear onscreen for a moment then disappear. See The Basic Controls section

on page 4 to find the Play/Stop button.

Andere Handbücher für Sansa SDMX1 1GB

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SanDisk MP3-Player Handbücher

SanDisk

SanDisk SANSA VIEW VIEW-7UM-ENG Bedienungsanleitung

SanDisk

SanDisk Sansa c200 Bedienungsanleitung

SanDisk

SanDisk SDMX18R-004GB-A57 - Sansa Clip+ 4 GB Digital... Bedienungsanleitung

SanDisk

SanDisk SANSATM E200 Bedienungsanleitung

SanDisk

SanDisk Sansa c150 Bedienungsanleitung

SanDisk

SanDisk E130 - Sansa 512 MB Digital Player Bedienungsanleitung

SanDisk

SanDisk Sansa Sansa Connect 4GB Bedienungsanleitung

SanDisk

SanDisk Clip Jam Bedienungsanleitung

SanDisk

SanDisk Sansa Clip Bedienungsanleitung

SanDisk

SanDisk Sansa c140 1GB Bedienungsanleitung

SanDisk

SanDisk Sansa C100 Bedienungsanleitung

SanDisk

SanDisk SDMX72048 Bedienungsanleitung

SanDisk

SanDisk SDMX11R-002GK-A57 - Sansa Clip 2 GB MP3... Bedienungsanleitung

SanDisk

SanDisk Sansa Clip Bedienungsanleitung

SanDisk

SanDisk Clip Sport Installationsanleitung

SanDisk

SanDisk Sansa e200R Rhapsody Bedienungsanleitung

SanDisk

SanDisk Sansa Connect Sansa ConnectTM Bedienungsanleitung

SanDisk

SanDisk Fuze Bedienungsanleitung

SanDisk

SanDisk Sansa m200 Series Bedienungsanleitung

SanDisk

SanDisk Sansa Clip-UM608-ENG Bedienungsanleitung

SanDisk

SanDisk C250 - Sansa 1 GB Digital Player Bedienungsanleitung

SanDisk

SanDisk Sansa c140 1GB Bedienungsanleitung

SanDisk

SanDisk Sansa c140 1GB Bedienungsanleitung

SanDisk

SanDisk SanDisk Sansa Clip MP3 & Audio Book Player Bedienungsanleitung

Beliebte MP3-Player Handbücher anderer Marken

Blaupunkt

Blaupunkt Compact Drive MP3 Bedienungsanleitung

Memorex

Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung

Meizu Electronic Technology

Meizu Electronic Technology E5 Bedienungsanleitung

Naxa

Naxa NMV-173NX Bedienungsanleitung

Philips

Philips PSA250 Bedienungsanleitung

Zipy

Zipy go! Waving Bedienungsanleitung

Sylvania

Sylvania SMPK4068 Bedienungsanleitung

Sony

Sony NW-MS7 - Memory Stick Walkman Bedienungsanleitung

Irradio

Irradio RF-42UC Bedienungsanleitung

NABAIJI

NABAIJI SWIM MUSIC 100 Bedienungsanleitung

Laser

Laser MP3-A9-4GB Bedienungsanleitung

Samsung

Samsung YP-T7F Bedienungsanleitung

Savant

Savant SMS-1001-00 Kurzanleitung

Trevi

Trevi XP 71 BT Bedienungsanleitung

AGPtek

AGPtek C2 Bedienungsanleitung

MobiBlu

MobiBlu DAH-1500i Bedienungsanleitung

Denver

Denver MPS-201 Bedienungsanleitung

Steren

Steren MP3-002 Bedienungsanleitung