Sangean WFR-29C Bedienungsanleitung

WFR-29C

中文

Revision 1

The iSangean App enables remote control of the WFR-29C running on your iPhone, iPod touch, iPad or Android smartphone.

iSangean is the remote control app for Sangean Internet radios and media streamers for your iPhone, iPod touch, iPad or Android smartphone. The

app allows selection of Internet radio stations, selection and control of media for UPnP/DLNA music streaming from a local computer, server or NAS

device, as well as control of FM radio and other functions (where these functions are present on the radio). The Now Playing screen provides radio

station or media information with direct control of the radio volume.

Download iSangean from Apple iTunes (Apple Store) and Google Play now!

"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to connect specically to iPod,

iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the

operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad

may affect wireless performance.

Contents

Introduction ...................................................................................... 3-7

Before you can use this product ...................................................... 3-4

Controls and connections ............................................................... 5-6

Navigation controls ............................................................................ 7

Network conguration ................................................................... 8-16

Connecting your radio to your computer network ......................... 8-15

Network remote control options ....................................................... 16

Internet Radio mode .................................................................... 17-31

Internet Radio-the basics ................................................................. 17

Selecting a radio station by location and genre .......................... 18-20

Searching for a radio station by name ............................................. 21

Searching a new or popular station ................................................. 22

Selecting a podcast / BBC Listen Again .......................................... 23

Presetting stations ........................................................................... 24

Display modes ................................................................................. 26

Customizing your radio .................................................................... 27

Selecting favorite stations ........................................................... 29-31

Music Player mode ...................................................................... 32-48

Use with Windows, Apple Mac and Linux ........................................ 31

Accessing your les via UPnP .................................................... 32-33

Locating and playing media les using UPnP .................................. 34

Media selection ................................................................................ 35

Controlling playback ........................................................................ 36

Display modes ................................................................................. 38

Playlists ............................................................................................ 39

Wake On LAN .................................................................................. 42

Prune servers .................................................................................. 42

Windows 7 ‘Play to’ function (UPnP renderer) ............................ 43-44

Using USB memory devices ....................................................... 45-46

DAB mode .................................................................................... 47-55

Selecting a DAB radio station .......................................................... 48

Display modes ................................................................................. 49

Finding new DAB radio stations ...................................................... 50

Manual Tuning ................................................................................. 51

Dynamic Range Control Settings ..................................................... 52

Station order setup .......................................................................... 53

Prune stations ................................................................................. 54

FM mode ....................................................................................... 55-60

Manual tuning .................................................................................. 56

Scan setting ..................................................................................... 58

Stereo / Mono switching .................................................................. 59

Presetting stations in DAB and FM modes ...................................... 60

Listening to Spotify ..................................................................... 61-64

Clock and Alarms ......................................................................... 65-75

Automatically updating the clock ...................................................... 65

Setting the clock format ................................................................... 66

Manually setting the clock ........................................................... 67-68

Setting the alarm clock ............................................................... 69-71

Snooze timer .................................................................................... 73

Disabling alarms .............................................................................. 73

Sleep timer ....................................................................................... 74

Inactive standby ............................................................................... 75

Display and Auto .......................................................................... 76-81

Equalizer function ............................................................................ 76

Brightness control ............................................................................ 78

Language selection .......................................................................... 79

Headphone socket and Line out socket ........................................... 80

Auxiliary input socket ....................................................................... 81

Information ................................................................................... 82-90

Factory reset .................................................................................... 82

Software update ............................................................................... 83

Network proles ............................................................................... 84

Software version display and Audio FAQ ......................................... 85

Accessing your audio files via a UPnP server using Windows Vista

and XP ........................................................................................ 86-87

Audio codecs ................................................................................... 88

Cautions and Specications ....................................................... 89-90

Before you can use this product

Before you can use your internet radio, you must have the following:

● A broadband Internet connection (not required for DAB, FM or Music

Player functions).

● A wireless access point (WiFi) connection connected to your broadband

Internet Service Provider, preferably via a router. In many cases the

broadband modem, router and wireless access point will be a single

combined unit supplied by your Internet Service Provider or bought

from a computer store.

● If your wireless network is congured to use Wired Equivalent Privacy

(WEP) or WiFi Protected Access (WPA/WPA2) data encryption then

you either need to know the WEP, WPA or WPA2 key used for encryption

so you can get the internet radio to communicate with the network, or

your router needs to offer WiFi Protected Setup (WPS).

If connecting using WiFi, the internet radio will typically work within a

10-20 metre radio from your wireless access point. The actual range

achieved will depend upon the building type, other nearby wireless

network, and possible interference sources. DAB and FM radio

functions can operate wherever the internet radio is able to receive a

suitable broadcast signal.

IMPORTANT:

Before you continue, make sure that your wireless access point or router

is powered up and working with your broadband Internet service (use your

computer to verify this). To get this part of the system working you must

read the instructions supplied with the wireless access point or router.

Battery operation

Battery operation using alkaline batteries

1. Remove the battery cover on the rear of the unit by pressing the catch.

Note:

Before you insert the batteries, if you use non-rechargeable batteries,

make sure the NiMH/Alkaline switch which located inside the battery

compartment is switched to Alkaline position. If you use rechargeable

batteries, make sure to switch NiMH/Alkaline switch to NiMH position.

2. Insert six UM-2 (C size) batteries into the spaces in the compartment.

3. Take care to ensure all batteries are inserted with correct polarity as

shown on the rear cabinet. Replace the battery cover.

4. Reduced power, distortion and a “stuttering sound” are all signs that

the batteries need replacing.

5. If the radio is not to be used for any extended period of time, it is

recommended that the batteries are removed from the radio.

IMPORTANT:

The batteries shall not be exposed to excessive heat such as sunshine,

re or the like.

Using the AC power adaptor

The AC power adaptor required for this unit should be 12 volts DC at 1A

center pin positve.

Insert the adaptor plug into the DC socket on the left side of the radio.

Plug the adaptor into a standard mains socket outlet.

Whenever the adaptor is used, the batteries are automatically

disconnected. The AC adaptor should be disconnected from the main

supply when not in use.

Battery operation using rechargeable batteries

Slide the battery switch to the NiHM position.

Insert 6 UM-2 batteries into spaces in the compartment. Make

sure all batteries are inserted with the correct polarity as shown on

the rear cabinet. The radio is also designed to be used with NiMH

rechargeable batteries.

Note:

Do not use a mix of old and new rechargeable batteries.

Do not use a mix of full and empty rechargeable batteries.

Do not use batteries that have a different mAh capacity

Do not use damaged or leaking batteries

Make sure the radio is switched off and connected to the AC adaptor.

When the charge indicator flashes yellow indicating batteries are

charging. Batteries will be fully charged in around 10 hours. The battery

shows steady yellow light when the battery charging is complete.

Note:

Duration for charging your battery fully can be varied according to

the mAh capacity of a battery. Higher mAh batteries required longer

charging time.

Important:

Under some conditions the charging LED indicator may switch off

after flashing briefly. This may happen if the batteries are already

freshly charged, or if the radio detects that you may be attempting

to recharge alkaline batteries or mixed different types or capacity of

rechargeable battery. In these cases the charging will be stopped.

Controls and connections

1. USB memory socket

2. Mode button

3. LCD display

4. Info button

5. Menu button

6. Back button

7. Forward button

8. Standby button

9. Battery charge indicator / Low battery indicator

10. Tuning Control Rotary / Select knob

11. Volume Control Rotary / Mute

12. Preset 5 / Stop button

13. Preset 4 / play / pause button

14. Preset 3

15. Preset 2 / Rewind button

16. Preset 1 / Fast-forward button

17. Loud speaker

18. Handle

19. FM telescopic aerial

20. Auxiliary input jack

21. Line out jack

22. Headphone jack

23. DC in jack

24. Alkaline / NiMH / NiCad rechargeable battery switch

Navigation controls

This page describes the basic means of controlling your WFR-29C internet radio.

Instructions for each operating mode are given in the later section of this book.

1. Pressing the Standby button brings your radio out of Standby mode. Pressing Standby while

the radio is in use will cause it to return to the Standby mode with the clock display.

2. Pressing the Mode button gives you access to each of the operating modes: Internet Radio,

DAB+ radio, Music player, FM radio and Auxiliary Input.

3. Pressing the Menu button will access the menu system, whereas the Info button allows the

display of information relating to the radio station or music le being played.

4. Many operations require the user to make a selection from the menu. Highlight the menu item

using the Tuning Control Rotary on the right side of the radio. Press the Tuning Control Rotary

to select that item. If there are more than ve items in a menu, then the display will automatically

scroll up or down so that the additional items become visible. If there are many items in a menu,

then the radio allows the menu to “wrap around” in either direction. This can make it easier to

reach items at the end of a long menu, such as a list of countries or Internet radio stations.

5. If an error is made when navigating the menus, it is generally possible to go back to a higher

level menu by pressing the Back button.

Internet radio

Spotify

Music player

DAB

Main menu

Conﬁguration

Connecting your radio to your computer network

1. Place your radio on a ﬂat surface and plug the mains lead into the mains socket located on the

left side of your radio ensuring that the plug is pushed fully into the socket.

2. Plug the other end of the mains lead into the wall socket and switch on the wall socket.

IMPORTANT: The mains plug is used as the means of connecting the radio to the mains supply.

The mains socket used for the radio must remain accessible during normal use.

In order to disconnect the radio from the mains completely, the mains plug should be removed

from the mains socket outlet completely.

3. When you apply power, the display on the radio will light up and say: 'SANGEAN'. The ﬁrst

time that you use your radio (or after Factory Reset) the display will show “Setup wizard” and

“YES”will be highlighted on the screen. Press the Tuning Control Rotary to start the setup

wizard. The screen will ask if you wish to run the setup wizard again at the next start up. This

will lead to the main menu.

4. Rotate the Tuning Control Rotary on the right hand side ofthe unit to highlight the desired

clock format (either 12 or 24 hour) then press the Tuning Control Rotary to enter your selection.

A menu allowing you to specify the auto update option for the clock will appear on the display.

The default of ‘Update from Network’ will be the best option for most users.

3,4

WELCOME TO

DIGITAL RADIO

Start now?

Setup wizard

12/24 hour format

Date/Time

10.

Rotate the Tuning Control Rotary to choose an auto-update option for the clock. This can

be updated from DAB or FM radio, from the Network, or not updated. The default is to auto

update from the network. If you choose any other option, go to step 8. Otherwise you will rst

need to select the correct time zone and daylight savings setting, see steps 6 and 7. If you

choose “No update” you will need to set the clock manually later( see the section of ‘Manually

setting the clock’). Press the Tuning Control Rotary to conrm your choice.

Rotate the Tuning Control Rotary to highlight the time zone which is applicable to your

location. Press the Tuning Control Rotary to enter the setting.

You will then need to set the Daylight Savings option according to your location (Daylight

Savings is also known as Summer/Winter time ). Rotate the Tuning Control Rotary to

highlight “YES” to turn on daylight savings if required or ‘NO’ if you do not wish to use daylight

savings then press the Tuning Control Rotary to conrm the setting.

You will then need to set 'Keep network connected.' By default, your radio will shut down its

WiFi connection when it is in standby. This minimizes power consumption but it does mean

that you will need to switch that radio on manually in order to use either the 'Play to' function

or any other remote control software. If you need to be able to remotely control the radio

even when it has been put into standby, then rotate the Tuning Control Rotary to highlight

'YES' to activate this function or 'NO' to deactivate this function. you can also choose to keep

the network connected by using the ‘Keep connected’ option in the network setting menu.

In the standby mode display either the WiFi signal indicator is shown with or without a cross

through it according to the chosen network settings.

The display will then show a list of WiFi regional options for the network set up. Rotate the

Tuning Control Rotary to highlight the required region and then press the Tuning Control

Rotary to select it. Your radio will then scan for available WiFi networks.

The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short

while the display will show a list of the available WiFi networks.

5-9

Most of Europe

Wlan region

Smith

Jones

[Rescan]

[Manual config]

SSID

Update from DAB

Update from FM

Update from Network

No update

Auto update

UTC+00:00:Dublin,Lon

UTC+00:30:

UTC+01:00:Madrid,Arr...

UTC+01:30:

UTC+02:00:Athens,Ca...

Set timezone

Network wizard

Scanning...

Network settings

Keep network connected?

Network settings

Inhaltsverzeichnis

Andere Sangean Internetradio Handbücher

Sangean

Sangean DDR-62 Bedienungsanleitung

Beliebte Internetradio Handbücher anderer Marken

Hama

Hama 00054840 Bedienungsanleitung