Sangean PR-D5 Bedienungsanleitung

381QD01-A

PR-D5

Operating instruction

Mode d’emploi

Instruccions de manejo

Gebruiksaanwijzing

Bedienungsanleitung

AM/FM-RDS

PortableDigital Tuning Radio

AM/FM-RDS

Radiodigitaleportable

AM/FM-RDS

Radio SintonizadoraDigital Portatil

AM/FM-RDS

Draagbare Digitale Radio

AM/FM-RDS

TragbaresDigitalradio

Important safety instructions

1. Read and understand all safety and operating instructions

before the radio is operated.

2. Retain instruction: The safety and operating instructions

should be retained for future reference.

3. Heed warnings.All warnings on the appliance and operating

instructions should be followed.

4. Follow all operations and use instructions.

5. Water and moisture: The appliance should not be used near

water. Do not use near a bathtub, washbowl, laundry tub,

kitchen sink, wet basement, swimming pool, etc.

6. Unplug the radio from theAC power outlet before cleaning.

Use only a damp cloth for cleaning the exterior of the radio.

7. Do not place the radio on an unstable cart, stand, bracket or

table. The radio may fall, causing serious personal injury and

damage to the radio.

8. Ventilation: This radio should be situated so that its location

or position does not interfere with its proper ventilation.

For example, the radio should not be used on a bed, sofa,

rug or other soft surfaces that may block the ventilation

openings. It should not be placed in a built-in situation

like a cabinet that may reduce air flow through the

ventilation openings.

9. Power sources: The radio should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

radio dealer or power company.

10. Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not

sure of the type of power supply to your home, consult your

dealer or local power company.

11.Do not overload wall outlets or extension cords. This can result

in a risk of fire or electrical shock. Never insert objects of any

kind into the radio through opening. The objects may touch

dangerous voltage points or short out parts. This could cause

a fire or electrical shock.

12. If the radio is left attended and unused for long periods of time,

unplug it form the wall outlet. This will prevent damage caused

by lightning or power line surges.

13. If the radio is left unattended and unused for a long period of

time, remove the batteries. The batteries may leak and damage

furniture of your radio.

14. Do not attempt to service the receiver yourself. Removing the

cover may expose you to dangerous voltage, and will void the

warranty. Refer all servicing to authorized service personnel.

15. Object and Liquid Entry-Never push objects of any kind into this

radio through opening as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind of product.

16. The appliance should be serviced by qualified service personnel

when:

The power supply cord or the plug has been damaged.

Objects have fallen or liquid had been spilled into the radio.

The radio has been exposed to rain or water.

The radio does not appear to operate normally or exhibits a

marked change in performance.

The radio has been dropped, or the enclosure damaged.

Controls

Power button

AUX In signal

Band and Tuning step selection

Alarm set

CT Display

LCD display

Tuning/SET/AUTO SEEK knob

Volume Control

Preset buttons

FM Stereo/Mono switch

AUX IN socket

Earphone socket

DC input socket

Antenna

Battery compartment

LCD Display

Battery power

Stereo display

RDS display

Sleep and snooze status

Time set

Alarm display

Digital display

Setting the clock

1. Clock can be set either the radio is power on or off.

2. Press the SET knob (on the side of the radio) for more than

2 seconds, display will flash time set symbol and also the

hour digits, followed by a beep.

3. Rotate the SET knob to set the required hours.

4. Press the SET knob, the minute digits will flash.

5. Rotate the SET knob to set the required minute.

6. Press the SET knob to complete time setting.

Or press POWER.

Operating the radio

Tuning the radio

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

There are 3 bands which are FM, AM and AUX-IN.

3. Rotate the Tuning knob to the desired frequency, shown in

the display.

4. Or, press the TUNING button to seek for the next available

station.

5. Rotate the Volume knob (on the side of the radio) to get required

sound level.

6. To turn off the radio, press the Power button.

Storing station presets

There are 5 memory presets for each waveband –

STATION PRESETS 1 to 5.

1. Press the Power button to turn on the radio.

2. Tune to required station using one of the methods previously

described.

3. Press and hold the required preset until the radio beeps.

The preset number will appear in the display (such as: )

and the station will be stored under chosen preset button.

4. Repeat this procedure for the remaining presets.

5. Stations stored in preset memories can be overwritten by

following above procedures.

Recalling stations presets

1. Press the Power button to turn on the radio.

2. Select the required waveband.

3. Momentarily press the required Preset button, the preset

number and station frequency will appear in the display.

RDS function

This function only applies when FM station which is listening

provides the RDS service.

1. When FM station provides RDS service, shows on the

display and the display shows the program type and then

shows the radio text if radio text is provided.

2. Press and hold CT button for more than 2 seconds until it beeps,

then the radio clock time will be automatically corrected. When it

shows “No CT” means there is no service.

AUX IN

1. Turn on the radio, and press the STEP/BANDbutton until “AUX”

is displayed.

2. Connect a stereo or mono audio source (ie iPod, MP3 or

CD player) to theAux in socket on the side of the radio.

And theAUX-IN light will be on.

3. Adjust the Volume control on your iPod, MP3 or CD player.

Setting the radio alarm

1. To activate the alarm, press and hold the ALARM button for

more than 2 seconds and it will beep and the display will

show “ALARM”.

2. To deactivate the alarm, press and hold the ALARM button for

more than 2 seconds and it will beep and the “ALARM” will

disappear from the display.

When the radio alarm is selected, the radio will turn on and play

the last played radio station at the chosen alarm time. (If it is under

AUX band, or the battery is low, then the alarm will sound by

buzzer). The radio alarm will continue for one hour unless turned

off by pressing the Power button.

Setting radio alarm time

The alarm time may be set after the clock time is set. The alarm

can be set either radio is on or off.

1. Press theALARM button, the radio alarm symbol will flash,

and the alarm time is shown.

2. During radio alarm flashing, press the SET knob for more

than 2 seconds followed by a beep tone, and the hour digits

will flash.

3. Rotate the SET knob to select the hour then press the SET knob

to confirm hour setting, and the minute digits will flash.

4. Rotate the SET knob to select the minute then press the

SET knob to finish setting.

5. Tune into the desired radio station and adjust the volume for the

alarm, and turn off the radio.

6. While the alarm is sounding, press the POWER button to stop it.

Sleep function

The sleep timer switches off the radio after a preset time

has elapsed.

1. Press and continue to hold down the Power button for more than

2 seconds, followed by beep tone, the display will cycle through

the available sleep times in the order 60-45-30-15-120-90-60.

Release the Power button when the required sleep time appears

on the display. The symbol will appear on the display and

the radio will play the last station selected.

2. To cancel the sleep function, press the POWER button, and the

symbol will disappear and radio is off.

Setting tuning step

Why setting tuning step?

There are different tuning steps for different countries. If you buy

the radio in Europe and intend to use it inAmerica, includes Latin

America, the tuning step should be switched.

1. When radio is off, long press the STEP/BAND button until it

beeps and “24 HOUR” flashes. Then rotate the TUNING knob

to switch 24/12 hour system.

2. Press the STEP/BANDbutton and then rotate the TUNINGknob

to switch MW (AM) step which is MW 9KHz or MW 10 KHz.

(10K for America and 9K for most other countries)

3. Press the STEP/BAND button to finish the setting.

Note:

After the tuning step is switched, AM station presets are erased.

FM Stereo/Mono mode

1. FM Stereo/Mono mode switch is on the side of the radio.

2. When FM signal is weak, some hiss may be audible. To reduce

the hiss, switch the Stereo/Mono to Mono mode.

Headphone socket

A3.5mm headphone socket located on the left-hand side of your

radio. That is to provide for either headphones or an earpiece.

Inserting a plug automatically mutes the internal speaker.

Reset the radio

When this device been attach by static electricity, the display

may show random codes ( meaningless characters ). To retrieve it,

unplug the power and take out the batteries for more than

3 minutes, the display will be back to the normal.

Andere Handbücher für PR-D5

Inhaltsverzeichnis

Sprachen:

Andere Sangean Radio Handbücher

Sangean

Sangean WR-2CL Bedienungsanleitung

Sangean

Sangean PR-D5 Bedienungsanleitung

Sangean

Sangean WR-2CL Bedienungsanleitung

Sangean

Sangean WR-2CL Bedienungsanleitung

Sangean

Sangean HDT-1 Bedienungsanleitung

Sangean

Sangean MMR-77 Bedienungsanleitung

Sangean

Sangean Genuine Mini WR-7 Bedienungsanleitung

Sangean

Sangean REVERY R10 Bedienungsanleitung

Sangean

Sangean DT-110 Bedienungsanleitung

Sangean

Sangean WFR-20 Bedienungsanleitung

Sangean

Sangean WR-11 Betriebsanleitung

Sangean

Sangean DT-120 Bedienungsanleitung

Sangean

Sangean HDR-16 Bedienungsanleitung

Sangean

Sangean HDT-1X Bedienungsanleitung

Sangean

Sangean dpr-202bt Bedienungsanleitung

Sangean

Sangean Fusion WFR-30 Bedienungsanleitung

Sangean

Sangean DT-400WAM Bedienungsanleitung

Sangean

Sangean WFR-1 - DATASHEET 3 Bedienungsanleitung

Sangean

Sangean SR-3 Bedienungsanleitung

Sangean

Sangean WR-2 Bedienungsanleitung

Sangean

Sangean PR-D3L Bedienungsanleitung

Sangean

Sangean MS-112 Bedienungsanleitung

Sangean

Sangean H205D Bedienungsanleitung

Sangean

Sangean WR-2 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung