Sangean U-1 Bedienungsanleitung
U1
Rersion 1
GB
1
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5.Do not use this apparatus near water.
6. Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.Do not defeat the safety purpose of the polarized or
grounding-type plug.Apolarized plug has two blades with one
wider than the other.Agrounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet. consult an electrician for replacement of the obsolete outlet.
2
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged. liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. To Reduce the Risk of Fire or Electric Shock,Do not Expose
ThisAppliance To Rain or Moisture.
16. The Shock Hazard Marking andAssociatedGraphical Symbol is
provided on the bottom panel of unit.
17.Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, shall not be placed on the apparatus.
18. Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
GB
3
The U-1 is designed and manufactured to meet the satisfaction of
usage around the house, yard, garage, campsite and worksite.
The full range 6 1/2 inches speakers produces high quality rich
sound. The high impact cushion around the radio is made to endure
a five-feet drop and also water resistant housing provides protection
when used poolside, by the lake and outdoors.
The apparatus is not for permanent outdoor use.
The U-1 has been fully tested to be certain it meets Sangean quality
control standards. Please read this manual carefully before using it to
make sure you realize all the outstanding features built into this
terrific radio set.
Warning!
* To avoid electric shock when using the appliance outdoors,
use the batteryonly when the weather is wet.
* Do not plug the AC lead into the AC outlet if the outlet is still
wet. Make sure that the outlet is dry before and after use.
* Please use the rubber covers for DC IN/AUX IN/MIC IN/
EARPHONE when using the appliance outdoors. If water gets
into the appliance it may cause electric shock.
4
Main features
(1) Ultra ruggedAM/FM 2 bands radio.
(2) Water resistant up to JIS 4 standard.
(3) Soft bended spring antenna.
(4)Rotary tuning and volume controls.
(5) Tuning LEDindicator.
(6) LED illuminator.
(7)Dial Scale with back light.
(8)Dynamic Bass Compensation for rich bass.
(9) 9-14VDC jack for vehicle and boat power.
(10) Earphones socket.
(11)AUX INsocket.
(12) Microphone IN socket.
(13) 6 1/2 inches 15 Watts full range speaker.
(14)AC wire compartment.
(15) High sensitivity, excellent sound performance.
GB
5
6
Controls
Power andAM/FM/AUX IN band selector
Tuning LEDindicator
Volume Control
AUX/FM band indicator
DC IN(9-14V) socket for vehicle and boat power
LED light
AUX INsocket
Open toAC cord compartment
AM band /Microphone indicator
Soft and bendable spring antenna
TuningControl
Battery Compartment
LED illuminator switch
Microphone socket
Headphones socket
Loudspeaker
CarryingHandle
Dial scale
3
45
67
8
910
11 12
13 14
15 16
17 18
2
1
GB
7
Power the radio
1. Battery operation
Installing the batteries, first turn battery cover fixture anti-clockwise to
loosen and put down the battery cover. Insert 6 xDsize ( UM-1 )
battery into the compartment. Ensure the battery is inserted in
accordance with the diagram shown.
Close the battery cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time, it is
recommended that the battery is removed from the radio.
2. AC operation
Before you plug theAC cord into theAC socket, be sure the voltage
is correct. If you have batteries in the radio and use theAC power
cord , the batteries will automatically be disconnected.
Switch the “Open” to theAC cord compartment to OPENposition,
pull back the compartment door and cylinder of theAC cord storage,
pull out theAC cord to get the required length to theAC socket.
You can store theAC cord after use in the opposite way you pull out
theAC cord.
3. Powered viaDC IN socket
The radio can be also powered via theDC INsocket which can allow
9-14 Volt DC. which is designed to be powered by the vehicle or the
boat so you can take the radio with you outdoors or on the boat.
8
Operating your radio FM
1. Turn on the radio by switching the Power knob to FM position.
The FM band indicator will be lit on.
2. Rotate the Tuning Control to select the desired station.
On FM, the tuning scale is marked in MHz ( Megahertz ).
The Tuning LEDwill be lit on, if the radio station has been
correctly tuned.
3.Adjust the Volume Control for comfortable listening.
4. To switch off the radio, turn the Power knob to OFF position.
5. The soft spring antenna is used for FM reception.
Operating your radio AM (MW)
1. Turn on your radio by switching the Power knob toAM position.
AM band indicator will be lit on .
2. Rotate the Tuning Control to select the desired station.
OnAM, the tuning scale is marked in kHz ( Kilohertz ).
The tuning LED will be lit on , if the radio station has been
correctly tuned .
3. Rotate your radio for bestAM reception.
4.Adjust the Volume Control for comfortable listening.
5. To switch off your radio , turn the Power knob to OFF position.
GB
9
Headphones socket
You can use a stereo or mono headphones set with a 3.5 mm plug
for listening radio program via headphones. When you insert the
headphones plug, the speaker is disconnected. This is a mono type
radio, sound from the headphones set will be all in mono even if you
apply a stereo headphones set.
AUX IN socket
Switch the Band selector toAUX. position, theAux. band indicator is
lit on. Connect a stereo or mono audio source ( like CDwalkman ) to
this input to listen the audio program via the speaker.
Microphone IN socket
Switch the Power/Band selector to eitherAM or FM orAUX. position.
Connect wired microphone and adjust Volume Control, Microphone
LEDindicator is lighted on, the radio can act as microphone system.
All the other audio program will be disconnected once microphone is
plugged into the socket. The microphone used should be dynamic
microphone with a 6.5 mm in diameter plug in jack.
LED Illuminator
You can press and release the LEDilluminator switch to give signal.
If press harder and release, the LEDilluminator is lit on for
illumination purpose. Press the switch harder again to turn off the
LEDilluminator.
Andere Handbücher für U-1
4
Inhaltsverzeichnis
Andere Sangean Radio Handbücher
Sangean
Sangean WR-2CL Bedienungsanleitung
Sangean
Sangean WFT-1Di Bedienungsanleitung
Sangean
Sangean DT-800 Bedienungsanleitung
Sangean
Sangean ProTravel PT-80 Bedienungsanleitung
Sangean
Sangean WFT-2D Bedienungsanleitung
Sangean
Sangean PR-D3L Bedienungsanleitung
Sangean
Sangean WR-2 Bedienungsanleitung
Sangean
Sangean PR-D3L Bedienungsanleitung
Sangean
Sangean ATS-909X 2 Bedienungsanleitung
Sangean
Sangean DT-250 Bedienungsanleitung
Sangean
Sangean DPR-65 Bedienungsanleitung
Sangean
Sangean DT-140 Bedienungsanleitung
Sangean
Sangean PR-D7 Bedienungsanleitung
Sangean
Sangean WR-22WL Bedienungsanleitung
Sangean
Sangean DPR-45 Bedienungsanleitung
Sangean
Sangean MS-112 Bedienungsanleitung
Sangean
Sangean WFR-1 - DATASHEET 3 Bedienungsanleitung
Sangean
Sangean ATS-803A Bedienungsanleitung
Sangean
Sangean PR-D18 Bedienungsanleitung
Sangean
Sangean H205D Bedienungsanleitung
