Sans Digital MOBILESTOR MS4UT+(B) Bedienungsanleitung

Hard Drive Installation

MOBILESTOR MS4UT+

(

) |

MS4CT+

1) Use the enclosed handles to secure the 4 HDDs with screws in the

given direction indicators.

2) Push the tab on the front cover downward to open the cover.

3) Press down the tab located on the top of the metal frame to remove

the frame.

4) Take the paper drive bay holder out of the device.

5) Slide 4 HDDs into the chassis and make sure they are securely installed

in the order from top to bottom. (Make sure the HDD1 is securely

installed first at all times. Otherwise the PC may not recognize the device.)

6) Reinstall the metal frame that was removed in Step 3. Make sure the

bottom of the frame is locked inside the track before closing the cover.

7) Connect the power supply to the device, plug in USB or eSATA cable in

the rear panel and power on the device.

8) Setup RAID settings by following RAID Setup instructions.

9) Please format the HDD via OS if the HDD is unformatted. Refer to OS

manual for detailed instructions on how to format HDD.

10) To take the HDD out from the device, slightly press down the handle

and pull it out.

• Follow all instructions.

• Do not place this device near water and clean only with dry cloth.

• Do not block any ventilation openings.

• Install in accordance with Sans Digital’s instructions.

• Do not place near any heat sources such as radiators, heat registers, stoves,

or the devices (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

• Only use attachments/accessories specified by Sans Digital.

• Unplug this during lightning storms or when unused for long periods of time.

• Refer all servicing to Sans Digital Technical Support. Servicing is required when the

devices has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the devices.

• Carefully read and follow the Quick Installation Guide and User Manual.

• Do not drop or shake the device.

• Do not move the device when it is powered on.

• Do not overload wall outlets.

HDD 1

HDD 2

HDD 3

HDD 4

5) METAL FRAME

4) HDD HANDLE3) RIGHT SIDE PANEL

1) FRONT PANEL

RAID Setup Notes

Diagrams

2) REAR PANEL

RAID Config.

USB 3.0 Port

eSATA Port

1394a Port (MS4CT+)

Fan

Power

Connector

1394b Port

(MS4CT+)

1) Operating Environment: Temperature 0 - 50 Celsius / Humidity 0% -

90%.

2) USB port of your PC must support power-off function so that the

device would go to sleeping mode. Setting up motherboard's (power

management) in S3 is strongly recommended. For more details, please

refer to user guide of motherboard BIOS setting.

3) Smart fan is controlled by the built-in thermal sensor, and it comes

with 2 modes (auto / manual) and 3 levels of speed:

Level 1: higher than 55°C 2,500rpm - 3,500rpm

Level 2: 45°C - 54°C 1,800rpm - 2,500rpm

Level 3: below 45°C 1,200rpm - 1,800rpm

4) Press the power button to power on the device or press the button

for 3 seconds to power off the device.

1) For RAID setup, press and HOLD the “MODE” button for 3

seconds until the LED flashes. Press the button again to change the

RAID mode. (The default setting is “RAID 5”)

2) After selecting the desired RAID mode, press and HOLD the

confirmation button located behind a small cover on the back panel

until the device powers off.

3) The selected RAID set will be ready to use. Please format the disk

follwing the OS instructions.

A) Please refer to manufacture website for a list of certified HDDs.

B) Rebuild time varies depending on the HDD volume, about 1 hour

for 200GB. Once Rebuild is complete, the rebuild LED will turn off.

32 56

15 16 17 18

21 22 23 24

4 7 8 9 10 11 12

19 20

1) Blue - Power on

Orange - Sleep

2) USB - In use / access

3) Power button - It needs to be pressed and held for 3 secs to power off. (This

design prevents accidental power off.)

4) Mode - RAID mode button needs to be pressed and held for 3 secs to switch

the device RAID mode. Confirmation button is located at on the back of the

unit. (This design will prevent accidental execution of this function.)

5) Fan button - Controls auto & manual modes and fan speed from level 1 to

level 3.

6) RAID 0 - Spanning mode / BIG.

7) RAID 0 - Striping mode.

8) RAID 1 - Mirroring mode.

9) RAID 3

10) RAID 5

11) RAID 10

12) Rebuild

13) eSATA - In use / access.

14) Firewire - In use / access. (MS4CT+ only)

15) Smart fan automatic mode.

16) Smart fan manual mode.

17) Fan speed - Level 1

18) Fan speed - Level 2

19) Fan speed - Level 3

20) HDD error - When any of HDD 1 - HDD4 has error, HDD error is on.

21 - 24) HDD1 / HDD2 / HDD3 / HDD4

Blue - Active Purple - Access Red - Rebuild

NOTE: When using RAID function,

HDDs with the same brand, model and

capacity is strongly recommended.

Dieses Handbuch passt für folgende Modelle

Andere Sans Digital Lagerung Handbücher

Sans Digital

Sans Digital TOWERRAID TR5UT+(B) Bedienungs- und Wartungshandbuch

Sans Digital

Sans Digital Towerraid 6G series Bedienungs- und Wartungshandbuch

Sans Digital

Sans Digital MOBILESTOR MS4UM+(B) Bedienungsanleitung

Sans Digital

Sans Digital iSCSI STORAGE Bedienungsanleitung

Sans Digital

Sans Digital TOWERSTOR TS2UT Bedienungsanleitung

Sans Digital

Sans Digital ACCUNAS AN104LS Bedienungsanleitung

Sans Digital

Sans Digital ACCUSTOR AS212X6 Bedienungsanleitung

Sans Digital

Sans Digital Towerraid TR4UT-B Bedienungs- und Wartungshandbuch

Sans Digital

Sans Digital TOWERRAID TR5M+(B) Bedienungsanleitung

Sans Digital

Sans Digital EliteSTOR ES212X12HP Bedienungsanleitung

Sans Digital

Sans Digital ELITESTOR ES104T+(B) Bedienungsanleitung

Sans Digital

Sans Digital AR316X6(R) Bedienungsanleitung

Sans Digital

Sans Digital ES208X6+B Bedienungsanleitung

Sans Digital

Sans Digital TOWERRAID TR5UT+(B) Bedienungsanleitung

Sans Digital

Sans Digital TowerRAID TR5UT+ Bedienungsanleitung

Sans Digital

Sans Digital ER208UT+B Bedienungsanleitung

Sans Digital

Sans Digital ACCUNAS AN2L Bedienungsanleitung

Sans Digital

Sans Digital ER208UT+B Bedienungsanleitung

Sans Digital

Sans Digital TOWERRAID TR8UT+(B) Bedienungsanleitung

Sans Digital

Sans Digital accuraid ari08x Bedienungsanleitung

Sans Digital

Sans Digital MOBILESTOR MS2UT+(B) Bedienungsanleitung

Sans Digital

Sans Digital MOBILERAID MR4UT Bedienungsanleitung

Sans Digital

Sans Digital TOWERRAID TR8U-B Bedienungsanleitung

Sans Digital

Sans Digital EliteSTOR ES316X12HP Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung