Sanus SASP1 Bedienungsanleitung
SASP
1
INSTRUCTION MANUAL
GET IT
RIGHT
THE FIRST TIME
Follow this step-by-step
instruction manual to
speed up your installation.
WE’RE HERE TO HELP
Our US-based install experts
are standing by to help.
Call us at:
800-359-5520
Or, chat at:
SANUS.com/chatSP
2
3
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Tools needed
Before getting started, let’s make sure this accessory is perfect for you!
1
2
3
4
CAUTION: Avoid potential personal injuries and property damage!
●This accessory may not be compatible with other add-on accessories. Verify with all pertinent owner’s manuals.
●Do not use this product for any purpose not explicitly specified by manufacturer.
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Ready to
begin?
Weight
Restrictions
for TV Mounts
Weight Limit
for the SASP1
CAUTION: Avoid potential personal injuries and property damage!
Review the IMPORTANT SAFETY INSTRUCTIONS in your TV mount’s instruction manual to verify weight restrictions.
Do not exceed 3 lbs. (1.3 kg) of accessories for the SASP1 panel.
Questions? Visit accents.sanus.com or call 1-800-359-5520 (UK: 0800-056-2853).
3 lbs.
(1.3 kg)
This SASP1 Small Parts Panel adds 1 lb.
(0.45 kg) to the weight of your TV.
Your total (combined) weight MUST NOT
exceed the maximum weight rating for your
TV mount.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
NOTE: DO NOT install more than 2 panels.
TOTAL
WEIGHT
(plus) (plus) (plus) (equals)
1 lb.
(0.45 kg)
SASP1
__ lbs.
(__ kg)
Your Mount
__ lbs.
(__ kg)
Accessories TV
__ lbs.
(__ kg)
Screwdriver
4
6.13in.
[155.6mm]
6.28in.
[159.5mm]
8.39in.
[213.2mm]
0.78in.
[19.69mm]
5.48in.
[139.07mm]
5.38in.
[136.62mm]
5.29in.
[134.48mm]
ø0.20in.
[5.20mm]
ø0.33in.
[8.40mm]
0.38in.
[9.5mm]
Dimensions in. [mm]
5
Parts and Hardware Included
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included
and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Hook and Loop Straps
Panel
01 x1
02 x2
6
Parts and Hardware Included
M4 X 6 mm
M6 X 12 mm M6 X 35 mm
M8 X 35 mm
22 mm
M8 X 20 mm
M4 X 12 mm M4 X 35 mm
TV Screws
Mounting ScrewsRetaining Screw Washers
Spacers
03 x1 04 x1
05 x1
06 x1
07 x4
10 x4
11 x4
12 x4
08 x4
09 x4
7
Determine the Mounting Method for Your SASP1 Panel
Go to STEP 1, OPTION A
on PAGE 8
Go to STEP 1, OPTION B
on PAGE 9
Go to STEP 1, OPTION C
on PAGE 12
For TV Mounts with side slots For TV Mounts
without side slots
For non-mounted TVs
(TVs with stands)
A BC
8
STEP 1 Option A Attach to a Wall Mount WITH Slots
Before installing panel 01 , install the TV brackets Bonto the TV. If the TV is already mounted to the wall, you may need to remove
it for better access. Refer to your TV mount’s installation manual for TV bracket assembly or TV removal.
Attach panel 01 on either TV bracket Bfit the tabs of the panel into the side slots of the TV bracket B. Secure the panel with the
M4 x 6 mm retaining screw 03 .
Continue with STEP 2 on PAGE 14.
01
B
01 B
NOTE: DO NOT install more than 2 panels.
Interference?
Move TV
brackets B
up or down
on the TV
to clear the
notch.
03
01
9
STEP 1 Option B Attach to a Wall Mount WITHOUT Slots
1. Remove the TV from the wall plate or arm assembly
(if mounted).
Refer to your TV mount’s installation manual for TV removal.
Before installing panel 01 :
2. Remove the TV bracket Bfrom the TV (if installed).
NOTE: Remember the locations of all the hardware AND the TV
bracket Bto reassemble onto your TV.
IMPORTANT: SAVE ALL TV screws, washers and spacers
(optional) you remove, to reattach your TV bracket B.
B
Screws
Washers
Wall Plate
Arm Assembly
Spacers (optional)
10
3. Position panel 01 behind either side of TV bracket Band line up with your TV VESA upper hole and TV bracket B.
IMPORTANT: Use the top slotted-hole location on panel 01 .
NOTE: You may need to verify clearance with your mount’s arm assembly or wall plate before installing.
B
01
B
01
CAUTION:
Verify adequate
thread engagement with the screw,
washer and SASP1 panel
01
.
-Too short will not hold the panel.
-Too long will damage the TV.
Too Short Too Long
Correct
NOTE: DO NOT install more
than two panels.
Inhaltsverzeichnis
Sprachen:
Andere Sanus TV-Halterung Handbücher
Sanus
Sanus XF228 Bedienungsanleitung
Sanus
Sanus Decora DST1 Bedienungsanleitung
Sanus
Sanus VMF322 Bedienungsanleitung
Sanus
Sanus New VisionMount VMT15 Bedienungsanleitung
Sanus
Sanus ATVS1 Bedienungsanleitung
Sanus
Sanus MLF13 Bedienungsanleitung
Sanus
Sanus VLT16B1 Bedienungsanleitung
Sanus
Sanus Sanus VisionMount MD115-G1 Bedienungsanleitung
Sanus
Sanus VMT5 Bedienungsanleitung
Sanus
Sanus NEW VisionMount VLT14 Bedienungsanleitung
Sanus
Sanus VSL4 Bedienungsanleitung
Sanus
Sanus FPA400 Bedienungsanleitung
Sanus
Sanus VLF320 Bedienungsanleitung
Sanus
Sanus BLL2 Bedienungsanleitung
Sanus
Sanus VisionMount LT25 Bedienungsanleitung
Sanus
Sanus Sanus VisionMount LL11-B1 Bedienungsanleitung
Sanus
Sanus VISIONMOUNT VMF Bedienungsanleitung
Sanus
Sanus Vuepoint F58c2 Bedienungsanleitung
Sanus
Sanus Classic MSF07 Bedienungsanleitung
Sanus
Sanus VLF320 Bedienungsanleitung
