Sanyo 09KHS71 Bedienungsanleitung

Pub. OI-85264180802000

• INSTRUCTION MANUAL

• MODE D’EMPLOI

Inverter-Controlled Split System Air

Conditioner

Climatiseur de type séparé contrôlé par

inverseur

Save These Instructions!

Conserver ce mode d’emploi

KHS0971

KHS1271

This air conditioner uses the new refrigerant R410A. COOL/DRY/HEAT Model

KHS0971_Cover-letter.fm Page 2 Tuesday, October 4, 2005 4:02 PM

Features

This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions

are provided below; refer to these descriptions when using the air conditioner.

• Microprocessor Controlled Operation

The interior compartment of the remote control unit

contains several features to facilitate automatic

operation, easy logically displayed for easy use.

• Simple One-touch Wireless Remote Control

The remote control unit has several features to

facilitate automatic operation.

• 24-Hour ON or OFF Timer

This timer can be set to automatically turn the unit

on or off at any time within a 24 hour period.

• 1-Hour OFF Timer

This timer can be set to automatically turn off the

unit at any time after one hour.

•NightSetback

Pressing this button changes the setting of the

room temperature thermostat, allowing you to set

the temperature at whatever level that you find

comfortable.

• Automatic and 3-step Fan Speed

Auto/High/Medium/Low

• Air Sweep Control

This function moves a flap up and down in the air

outlet, directing air in a sweeping motion around the

room and providing comfort in every corner.

• Auto. Flap Control

This automatically sets the flap to the optimum

position during heating, cooling, and drying

operation.

• Automatic Switching between Cooling and

Heating

This unit automatically switches between cooling

operation and heating operation according to the

difference between the room temperature and the

temperature setting.

• Hot Start Heating System

Right from the start, the air is warm and

comfortable. This system prevents any cold blasts

at the beginning while the heat pump is warming

up, or even defrosting.

• Automatic Restart Function for Power Failure

Even when power failure occurs, preset

programmed operation can be reactivated once

power resumes.

• High Power Operation

If not in Auto Operation, the unit operates at

maximum output for 30 minutes, regardless of the

desired temperature.

The fan speed is 1 step above “High”.

• Quiet Operation

The fan rotates slower than the fan speed setting to

provide a quieter operating sound.

•IONOperation

While it is operating, the unit generates negative

ions that freshen up the air in the room.

• Anti-Mold Filter

This unit is equipped with an anti-mold filter that

inhibits the growth of mold and bacteria.

• Air Clean Filter

An air filter that eliminates unpleasant odors and

cleans the air is available.

Purchase a replacement filter at your local dealer.

(model STK-FDXB)

OI-802-2-EG

01_KHS0971_EN.fm Page 2 Tuesday, September 27, 2005 2:53 PM

Contents

Page

Features ...................................................................................................................2

Product Information..................................................................................................3

Alert Symbols...........................................................................................................3

Installation Location .................................................................................................4

Electrical Requirements ...........................................................................................4

Safety Instructions....................................................................................................4

Names of Parts ........................................................................................................5

Using the Remote Control Unit ..............................................................................10

Operation with the Remote Control Unit ................................................................12

1. Automatic Operation .....................................................................................12

2. Manual Operation .........................................................................................13

3. Adjusting the Fan Speed...............................................................................14

4. Fan Only........................................................................................................14

5. Night Setback Mode......................................................................................15

6. QUIET Mode .................................................................................................16

7. HIGH POWER Mode ....................................................................................16

8. ION Mode......................................................................................................16

Special Remarks....................................................................................................17

Setting the Timer....................................................................................................18

Using the 1-Hour OFF Timer .................................................................................20

Tips for Energy Saving ...........................................................................................20

Adjusting the Airflow Direction ...............................................................................21

Operation without the Remote Control Unit ...........................................................22

Care and Cleaning .................................................................................................22

Troubleshooting......................................................................................................25

Operating Range....................................................................................................25

Product Information

If you have problems or questions concerning your Air Conditioner, you will need

the following information. Model and serial numbers are on the nameplate on the

bottom of the cabinet.

Model No. ______________________ Serial No. _______________________

Date of purchase ___________________________________________________

Dealer’s address ___________________________________________________

Phone number ___________________

Alert Symbols

The following symbols used in this manual, alert you to potentially

dangerous conditions to users, service personnel or the appliance:

This symbol refers to a hazard or unsafe

practice which can result in severe

personal injury or death.

This symbol refers to a hazard or unsafe

practice which can result in personal injury

or product or property damage.

CAUTION

OI-802-3EG

01_KHS0971_EN.fm Page 3 Tuesday, September 27, 2005 2:53 PM

Installation Location

•We recommend that this air conditioner be installed properly by qualified

installation technicians in accordance with the Installation Instructions

provided with the unit.

• Before installation, check that the voltage of the electric supply in your home or

office is the same as the voltage shown on the nameplate.

Electrical Requirements

1. All wiring must conform to the local electrical codes. Consult your dealer or a

qualified electrician for details.

2. Each unit must be properly grounded with a ground (or earth) wire or through

the supply wiring.

3. Wiring must be done by a qualified electrician.

Safety Instructions

•Read this Instruction Manual carefully before using this air conditioner. If

you still have any difficulties or problems, consult your dealer for help.

•This air conditioner is designed to give you comfortable room conditions.

Use this only for its intended purpose as described in this Instruction

Manual.

•Do not install this air conditioner where there are fumes or flammable

gases, or in an extremely humid space such as a greenhouse.

•Do not install the air conditioner where excessively high heat-

generating objects are placed.

Avoid: To protect the air conditioner from heavy corrosion, avoid installing the outdoor

unit where salty sea water can splash directly onto it or in sulphurous air near a

spa.

•Never use or store gasoline or other flammable vapor or liquid near the

air conditioner —it is very dangerous.

•This air conditioner has no ventilator for intaking fresh air from

outdoors. You must open doors or windows frequently when you use

gas or oil heating appliances in the same room, which consume a lot of

oxygen from the air. Otherwise there is a risk of suffocation in an

extreme case.

•Do not turn the air conditioner on and off from the power mains switch.

Use the ON/OFF operation button.

•Do not stick anything into the air outlet of the outdoor unit. This is

dangerous because the fan is rotating at high speed.

•Do not let children play with the air conditioner.

•Do not cool or heat the room too much if babies or invalids are present.

CAUTION

OI-802-4-EG

01_KHS0971_EN.fm Page 4 Tuesday, September 27, 2005 2:53 PM

Names of Parts

This illustration is based on the external view of a standard model.

Consequently, the shape may differ from that of the air conditioner which you

have selected.

This air conditioner consists of an indoor unit and an outdoor unit. You can

control the air conditioner with the remote control unit.

Air Intake Air from the room is drawn into this section and passes through air filters which

remove dust.

Air Outlet Conditioned air is blown out of the air conditioner through the air outlet.

Remote Control Unit The wireless remote control unit controls power ON/OFF, operation mode

selection, temperature, fan speed, timer setting, and air sweeping.

Refrigerant Tubes The indoor and outdoor units are connected by copper tubes through which

refrigerant gas flows.

Drain Hose Moisture in the room condenses and drains off through this hose.

Outdoor (Condensing) Unit The outdoor unit contains the compressor, fan motor, heat exchanger coil, and

other electrical components.

INDOOR UNIT

Air intakes

Remote control unit

Air outlet

Refrigerant tubes

Drain hose

OUTDOOR UNIT

Air outlet

NOTE

OI-802-5EG

01_KHS0971_EN.fm Page 5 Tuesday, September 27, 2005 2:53 PM

Unit Display and Operation Button

REMOTE CONTROL receiver This section picks up infrared signals from the remote control unit (transmitter).

OPERATION button When the remote control cannot be used, pressing this button enables heating

and cooling operation.

Each time this button is pressed, the type of operation conducted is indicated by

the changing color of the OPERATION lamp. Press the button and select the

lamp color that suits your preference for operation.

OPERATION lamp This lamp lights when the system is in the continuous AUTO (red or green),

HEAT (red), DRY (orange), COOL (green) and FAN (green) mode.

The OPERATION lamp lights up red and orange alternately when the system is

defrosting.

TIMER lamp This lamp lights when the system is being controlled by the timer.

QUIET lamp This lamp lights during operation in the QUIET mode.

ION lamp This lamp lights during operation in the ION mode while the indoor unit is

operating.

The unit’s display lamps are dimmed during operation in the NIGHT SETBACK

mode.

QUIET

REMOTE CONTROL receiver

Avoid using radio equipment

such as mobile phone near

(within 4 ft.) the remote

control receiver. Some radio

equipment may cause

malfunction of the unit.

If the trouble happens,

disconnect power and restart

the air conditioner after a few

minutes.

IMPORTANT

OPERATION lamp

TIMER lamp

QUIET lamp

OPERATION button

INDOOR UNIT

ION lamp

Cooling operation

(green)

Heating operation

(red)

Stop

(lamp off)

NOTE

OI-802-6-EG

01_KHS0971_EN.fm Page 6 Tuesday, September 27, 2005 2:53 PM

Remote Control Unit (Display)

(1) Operation mode

AUTO .........................................

HEAT ..........................................

MILD DRY ..................................

COOL.........................................

FAN ............................................

(2) Fan speed

Automatic operation ...................

HIGH .........................................

MEDIUM.....................................

LOW ...........................................

(3) Temperature setting

60 –86 °F

When set to 80 °F

temperature indication................

(4) Timer

24-hour clock with ON/OFF

program Timer............................

ON Timer....................................

OFF Timer..................................

1-hour OFF Timer.......................

(5) NIGHT SETBACK ......................

(6) Confirmation of transmission .....

(7) Auto. flap indication ....................

Flap angle indication ..................

Sweep indication ........................

(8) High power operation .................

(9) Quiet operation...........................

(10)ION operation ...........................

Displayed when setting timer

Displayed when transmitting data

Displayed when indoor unit

sensor is in use

Displayed when setting

temperature

Displayed when temperature is

shown

Displayed when the

time display is set to

12-hour time.

Symbols

OI-802-7EG

01_KHS0971_EN.fm Page 7 Tuesday, September 27, 2005 2:53 PM

Remote Control Unit

The illustration above pictures the remote control unit after the cover has been

opened.

Transmitter When you press the buttons on the remote control unit, the mark appears in

the display to transmit the setting changes to the receiver in the air conditioner.

Sensor A temperature sensor inside the remote control unit senses the room

temperature.

Display Information on the operating conditions is displayed while the remote control unit

is switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are

not displayed.

ION button : This button is for turning the negative ions generated during operation on

and off.

ON/OFF operation button This button is for turning the air conditioner on and off.

1 HR. TIMER button

(1-HOUR OFF TIMER)

: When you press this button, regardless of whether the unit is operating or

stopping, the unit operates for one hour and then shuts down.

Transmitter Sensor

(Cover closed)

Display

FAN SPEED selector button

FLAP button

ON TIME

setting

buttons Return button

Advance button

CANCEL button

SENSOR button

CLOCK button

ACL button

ON/OFF operation button

1 HR. TIMER button

Temperature setting buttons (TEMP.)

MODE selector button

Advance button

NIGHT SETBACK button

HIGH POWER button

OFF TIME

setting

buttons

Return button

ION button

ADDRESS switch

Temperature display

selector button

Time display selector button

QUIET button

NOTE

OI-802-8-EG

01_KHS0971_EN.fm Page 8 Tuesday, September 27, 2005 2:53 PM

Remote Control Unit (continued)

Temperature setting buttons

(TEMP.)

Press the button to increase the set temperature.

Press the button to reduce the set temperature.

The temperature setting changes by 1 °C or 2 °F each time one of the TEMP.

buttons is pressed.

QUIET button : When you press this button, the fan rotates slower than the fan speed

setting to provide a quieter operating sound.

MODE selector button Use this button to select AUTO, HEAT, DRY, COOL or FAN mode.

(AUTO) : When this setting is selected, the air conditioner calculates the difference

between the thermostat setting and the room temperature and

automatically switches to the ‘‘COOL’’ or ‘‘HEAT’’ mode as appropriate.

(HEAT) : The air conditioner makes the room warmer.

(DRY) : The air conditioner reduces the humidity in the room.

(COOL) : The air conditioner makes the room cooler.

(FAN) : The air conditioner works only as a circulation fan.

FAN SPEED selector button : The air conditioner automatically decides the fan speeds.

: High fan speed

: Medium fan speed

: Low fan speed

NIGHT SETBACK button For details, see “5. Night Setback Mode”. When you press this button in the

HEAT, DRY or COOL mode, the mark appears in the display, and the remote

control unit will automatically adjust the set temperature to save energy.

FLAP button Press this button either to select the setting of the airflow direction to the auto.

flap in each mode or one of the six possible positions manually or to select the

sweep function which moves the flap up and down automatically.

: Auto flap setting: If selected in a heating operation, the flap is set to

position (3) in the following chart. If selected in a cooling or dry operation,

the flap is set at position (7) in the following chart.

: The airflow direction can be set manually. (six positions)

: The flap moves up and down automatically.

When you press the FLAP button, the air flow direction will be changed one by

one as follows.

HIGH POWER button : If this button is pressed during HEAT, DRY, COOL or FAN operation, the

unit operates at maximum output for 30 minutes, regardless of the desired

temperature.

The fan speed is 1 step above “High”.

ON TIME/OFF TIME setting

buttons

No display: The timer does not operate.

: The air conditioner starts at the set time.

: The air conditioner stops at the set time.

: The air conditioner stops and starts, or starts and stops, at the

set times every day. For details, see “Setting the Timer”.

NOTE

SWEEP

OI-802-9EG

01_KHS0971_EN.fm Page 9 Tuesday, September 27, 2005 2:53 PM

Remote Control Unit (continued)

Using the Remote Control Unit

SENSOR button When you press this button (use a small-tipped object such as a ballpoint pen),

the mark will appear at the display. And the room temperature is detected by

the sensor which is built into the indoor unit and the air conditioner is controlled

accordingly.

If the remote control is located near a heat source, such as a space heater or in

direct sunlight, press the SENSOR button to switch to the sensor on the indoor

unit.

Temperature Display Selector

button

This switches the temperature display between °C and °F.

Time Display Selector button This switches the time display between 24-hour time and 12-hour time.

ACL button (ALL CLEAR) Puts the remote control unit into pre-operation status. Always press this button

after replacing the batteries.

ADDRESS switch •The address switch changes to prevent mixing of signals from remote control

units when two air conditioners are installed next to each other. Normally, the

address switch is set to A. For more information, please contact the dealer

where you made the purchase.

•Normally, the tabs on the remote control unit should not be bent.

The remote control unit sends the temperature signal to the air conditioner regularly at five minute

intervals. If the signal from the remote control unit stops for more than 15 minutes due to the loss of the

remote control unit or other trouble, the air conditioner will switch to the temperature sensor which is built

into the indoor unit and control the room temperature. In these cases, the temperature around the remote

control unit may differ from the temperature detected at the air conditioner’s position.

How to Install Batteries

•The batteries last about six months, depending on how much you use

the remote control unit. Replace the batteries when the remote control

unit’s display fails to light, or when the remote control cannot be used to

change the air conditioner’s settings.

•Use two fresh leak-proof type-AAA alkaline batteries.

•In replacing batteries, follow the instructions as mentioned in the sub-

section “How to Install Batteries”.

•If you do not use the remote control unit more than 1 month, take out the

batteries.

NOTE

1. Slide the cover in the direction

indicated by the arrow and remove it.

2. Install two AAA alkaline batteries.

Make sure the batteries point in the

direction marked in the battery

compartment.

3. Use a thin object such as the tip of a

pen to press the ACL button.

ACL button

NOTE

OI-802-10-EG

01_KHS0971_EN.fm Page 10 Tuesday, September 27, 2005 2:53 PM

Andere Handbücher für 09KHS71

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sanyo Klimaanlage Handbücher

Sanyo

Sanyo KMS1872 Bedienungsanleitung

Sanyo

Sanyo V3622 Bedienungsanleitung

Sanyo

Sanyo SAP-K92A Betriebsanleitung

Sanyo

Sanyo 36KH72R Betriebsanleitung

Sanyo

Sanyo 26KHH72R Betriebsanleitung

Sanyo

Sanyo Mini ECO-i SPW-ASR74GXH56(A/B) Bedienungsanleitung

Sanyo

Sanyo SAP-KV94GJ Bedienungsanleitung

Sanyo

Sanyo SPW-T253GH56 Bedienungsanleitung

Sanyo

Sanyo XMS1272 Betriebsanleitung

Sanyo

Sanyo SAP241KC Bedienungsanleitung

Sanyo

Sanyo STB0810C1-S Bedienungsanleitung

Sanyo

Sanyo ECOi C0705DXHN8 Bedienungsanleitung

Sanyo

Sanyo SAP243RC Bedienungsanleitung

Sanyo

Sanyo KS1872 Betriebsanleitung

Sanyo

Sanyo SAP361TC Bedienungsanleitung

Sanyo

Sanyo XS1872 Betriebsanleitung

Sanyo

Sanyo SAP-CMRV3143GJ Betriebsanleitung

Sanyo

Sanyo C4272R Bedienungsanleitung

Sanyo

Sanyo SAP-KRV96EH Betriebsanleitung

Sanyo

Sanyo KMS0772 Bedienungsanleitung

Sanyo

Sanyo ECO-i 09AHX52 Installations- und Benutzerhandbuch

Sanyo

Sanyo KHS3672R Bedienungsanleitung

Sanyo

Sanyo KHS3072R Bedienungsanleitung

Sanyo

Sanyo XS2422 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung