Sanyo Xacti VPC-HD2000 Series Bedienungsanleitung

INSTRUCTION MANUAL

Dual Camera

)(a ct i

VPC-HD2000EX

VPC-HD2000

VPC-HD2000GX

H_:3131"l|

Important note

This manual explains how to safely operate the VPC-HD2000EX,

VPC-HD2000 and VPC-HD2000GX.

Any information regarding only one of these products will be labeled as such.

Please read these instructions carefully before using the camera.

Make sure to read and understand the separate booklet "SAFETY MANUAl".

Keep this manual in a safe place for later reference.

Warning

TOPREVENTTHERISKOFFIREORELECTRICSHOCK,DONOT

EXPOSETHISAPPLIANCETORAINORMOISTURE.

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of

California (USA):

WARNING:

This product contains chemicals, including lead, known to the State of

California to cause cancer, birth defects or other reproductive harm. Wash

hands after handling.

• This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

,.- Declaration of Conformity

Model number: VPC-HD2000

Trade Name: SANYO

Responsible party: SANYO FISHER COMPANY

Address: 21605 Plummer Street, Chatsworth, California 91311

Telephone No.: (818) 998-7322

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

i English

FOR CANADIAN USERS

• This Class B digital apparatus complies with Canadian ICES-O03.

FOR EU USERS

The symbol mark and recycling systems described below apply to EU

countries and do not apply to countries in other areas of the world.

Your SANYO product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

The symbol mark means that electrical and electronic equipment, batteries

and accumulators, at their end-of-life, should be disposed of separately from

your household waste.

Note:

if a chemical symbol is printed beneath the symbol mark, this chemical

symbol means that the battery or accumulator contains a heavy metal at a

certain concentration. This will be indicated as follows: Hg: mercury, Cd:

cadmium, Pb: lead

in the European Union there are separate collection systems for used

electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste collection/

recycling centre.

Please, help us to conserve the environment we live in!

SANYO FISHER Sales (Europe) GmbH

Stahlgruberring 4, D-81829 MQnchen, Germany

SANYO Electric Co., Ltd.

1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan

FOR RUSSIAN USERS

(_[_ This product is certified by an official certification company

which is authorized by the Russian Federation.

AR46 English ii

HOW TO READ THIS MANUAL

For first-time users

Please read the sections on "SETUP" and "SIMPLE" in this manual,

as well as the included "QUICK GUIDE" to familiarize yourself with

your camera's operation.

To use the various camera features

Please read the sections on "NORMAE' and "OPTION SETTINGS" in

this manual. To view on a TV, please read the section on "OTHER

DEVICES AND CONNECTIONS" in this manual. To connect to a

computer, please see the "Xacti Software CD INSTRUCTION

MANUAL:'.

To use additional features

To use a computer to edit the recorded data or to save data to a DVD,

please read the "Xacti Software CD INSTRUCTION MANUAl".

You may find the answers to questions or problems concerning camera

operation in the sections "COMMONLY ASKED QUESTIONS" (page 168)

and "TROUBLESHOOTING" (page 176).

Symbols used in this manual

HINT Points giving some extended instructions or special points to pay

attention to.

CAUTION Points that require special attention.

(page xx) Refer to the page indicated for detailed information.

III English

SHOOT, PLAY BACK AND SAVE

Insert the SD Memory Card.

• An SD Memory Card is not included with your camera. Please

purchase a commercially sold card.

• In this manual, the SD Memory Card is referred to as the "card".

Card slot cover Card slot

SD M( mory Card

Connect the AC adaptor to the camera.

DC IN terminal

IN terminal cover

Supplied AC adaptor

To power outlet

English iv

SHOOT, PLAY BACK AND SAVE

Set the REC/PLAY switch

to REC.

Press the ON/OFF button

for at least I second to turn

the camera on.

• If the screen to set the

date and time appears,

press the MENU button 2

times to cancel it.

For how to set the date

and time, see page 43.

Record.

To record a video clip:

• Press the [ IL_ ] button to

begin recording a video

clip.

• Press the [ I_ ] button

again to end the

recording.

To take a photo:

• Press the [ O ] button.

• A still image is captured.

REC/PLAY switch

Set to REC

[

ON/OFF button

VEnglish

• Sanyo declines any claim for compensation for recorded contents etc. in case

of photographing or recording failure due to a chance camera or card flaw.

Set the REC/PLAY switch

to PLAY.

• The display changes to

the Playback Screen.

Select the image to play

back.

• Toggle the SET button

left, right, up or down to

move the orange frame

to the image you wish to

play back.

• The image information

for the framed image is

shown at the bottom of

the screen.

REC/PLAY switch

SET bu_on

English vi

SHOOT, PLAY BACK AND SAVE

3Press the SET button.

•Playback begins.

• Set the REC/PLAY switch to REC.

Press the ON/OFF button for at least 1 second to turn the camera off.

Please confirm that your computer is connected to the Internet.

vii English

Using the supplied CD-ROM (Xacti Software CD), you can store your

captured images on a DVD. Detailed information about the Xacti

Software CD can be found on page 4 in the Xacti Software CD

INSTRUCTION MANUAL.

Install application programs

1Set the supplied CD-ROM in your computer's DVD drive.

•The installation window opens.

2Click on [Nero 8 Essentials].

• After clicking on an application program, follow the instructions shown

on the monitor to install the program.

• Nero 8 Essentials works with both Windows XP and Windows Vista.

For detailed information concerning the operating environment,

please see page 5 in the Xacti Software CD INSTRUCTION MANUAL.

3In the installation window, click on [Finish] and remove the CD-ROM

from the computer's DVD drive.

• The supplied Nero 8 Essentials cannot be used to record Blu-ray

Disks or AVCHD.

• To record Blu-ray Disks or AVCHD, please upgrade the Nero 8

Essentials software (a paid-for service).

• Note that your computer must be connected to the Internet in order to

complete this procedure.

• Please see the Sanyo support page (page 16 in the Xacti Software

CD INSTRUCTION MANUAL) or visit the following website for more

information.

http://www.sanyo-d sc.com/

• When the installation window closes, a dialog box to connect to the

website introducing Kodak's online service appears. Check the [No

thanks!] option button, and then click on the [OK] button.

English VIII

SHOOT, PLAY BACK AND SAVE

Connect your camera to a computer

Connect your camera to a computer, and copy the desired files to the

computer.

1use the supplied dedicated USB interface cable to connect your

camera to the computer.

Turn on the camera.

•The USB Connection Screen appears on the camera's monitor.

To power outlet

To USB terminal on

the docking station To USB connector

on the computer

Supplied dedicated USB

interface cable

•Insert the plug with the [A]

mark facing up.

Dedicated USB

interface cable

ix English

Andere Handbücher für Xacti VPC-HD2000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sanyo Camcorder Handbücher

Sanyo

Sanyo VPC HD1000 - Xacti Camcorder - 1080i Installationsanleitung

Sanyo

Sanyo VPC-E9 Bedienungsanleitung

Sanyo

Sanyo VM-PS12 Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-WH1YL Bedienungsanleitung

Sanyo

Sanyo VPC-HD1A Bedienungsanleitung

Sanyo

Sanyo XACTI VPC-SH1EX Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-FH1 Series Bedienungsanleitung

Sanyo

Sanyo VPC CA9 - Xacti Camcorder - 720p Benutzerhandbuch

Sanyo

Sanyo VPC-CG20 - Full HD 1080 Video Montageanleitung

Sanyo

Sanyo VM-EX370P Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-HD2000 Series Bedienungsanleitung

Sanyo

Sanyo IDC-1000ZE iDshot Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-CG100EX Montageanleitung

Sanyo

Sanyo Xacti VPC-HD800GX Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-C4 Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-CG100EX Bedienungsanleitung

Sanyo

Sanyo VEM-S1P Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-FH1 Series Bedienungsanleitung

Sanyo

Sanyo VPC-SH1BK Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-HD1 Bedienungsanleitung

Sanyo

Sanyo VCC-HD460 Bedienungsanleitung

Sanyo

Sanyo VPC-CG20BK Bedienungsanleitung

Sanyo

Sanyo VM-D6P Bedienungsanleitung

Sanyo

Sanyo Xacti VPC-CG10BK Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Panasonic

Panasonic NV-VS40B Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Panasonic

Panasonic AG-HMC152EN Bedienungsanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Panasonic

Panasonic HDC-SD100 Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

Panasonic

Panasonic NVM40 Bedienungsanleitung