Sanyo MCD-ZX100F Bedienungsanleitung

INSTRUCTION MANUAL

CD Portable

Radio Cassette Recorder

MCD-ZX100F

MCD-ZX100F/AU 7/5/04, 10:10 AM1

PRECAUTIONS

CAUTION - USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED IN THE OPERATION INSTRUCTION MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROP-

ERLY QUALIFIED PERSONNEL.

• The apparatus shall not be exposed to drip-

ping or splashing.

• No object filled with liquids, such as vases,

shall be placed on the apparatus.

• Do not use where there are extremes of tem-

perature (below 5°C or exceeding 35°C).

• Because of the CD player’s extremely low

noise and wide dynamic range, there might

be a tendency to set the volume on the

amplifier unnecessarily high. Doing so may

produce an excessively large output from

the amplifier which could damage your

speakers.

• Sudden changes in the ambient tempera-

ture may cause condensation to form on the

optical lens inside the unit. If this happens,

take out the disc, leave the unit for about 1

hour, and then proceed to operate.

• Do not install this equipment in a confined

space, such as a book case or built in

cabinet.

• The rating label is located on the bottom of

the unit.

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

ADVARSEL-USYNLIG LASER STRÅLING VED ÅBNING, NÅR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDGÅ

UDS ÆTTELSE FOR STRÅLING.

VARNING-OSYNLIG LASER STRÅLNING NÄR DENNA DEL

ÄR ÖPPNAD OCH SPÄRR ÄR URKOPPLAD. STRÅLEN ÄR

FARLIG.

VORSICHT! -UNSICHTBARE LASERSTRAHLUNG TRITT

AUS, WENN DECKEL GEÖFFNET UND ENN

SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. NICHT,

DEM STRAHL AUSSETZEN.

VARO–AVATTAESSAJASUOJALUKITUSOHITETTAESSA

OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄTEESEEN.

MCD-ZX100F/AU 7/5/04, 10:10 AM2

1. Stop button (n)

2. Skip/Search down button (f)

3. Memory button (MEMORY)

4. Function switch (FUNCTION)

5. Bass expander button (BASSXPANDER)

6. Volume control (VOLUME)

7. Pause button (PAUSE)

8. Stop/Eject button (STOP/EJECT)

9. Fast forward button (F.FWD)

10. Rewind button (REW)

11. Play button (PLAY)

12. Record button (REC)

13. CD Compartment Lid

14. Tuning control (TUNING)

15. Band select switch (BAND)

16. Display

17. Repeat button (REPEAT)

18. Skip/Search up button (e)

19. Play/Pause button (i)

20. Cassette holder

21. Telescopic aerial

22. Headphones socket (PHONES)

23. AC input socket (AC INPUT ~)

24. Battery compartment lid

25. FM mode/Beat cancel switch

(FM MODE/BEAT CANCEL)

CONTROLS

78910 12

PAUSE

STOP/EJECT

F.FWD REW PLAY REC

FM MODE

MONO 21

BEAT

CANCEL

MCD-ZX100F/AU 7/5/04, 10:10 AM3

Caution on batteries

To prevent battery electrolyte leakage, which

may result in injury and damage to the unit or

other objects, observe the following precautions:

1. All batteries must be installed with the proper

polarity (see diagram on the rear of the unit).

2. Do not mix new with old or used batteries.

3. Only use batteries of the same type and

brand.

4. Remove the batteries when they are not to

be used for a long period time.

5. When the batteries have become

discharged, they must be disposed of in a

safe manner which complies with all appli-

cable laws.

POWER SUPPLY

GENERAL OPERATION

Adjusting the volume

Turn the VOLUME control.

Bass expander button

Press the BASSXPANDER button to ZON to

enhance the bass sound.

Battery compartment lid

2 3

Headphones

Connect stereo headphones (not supplied) to

the PHONES socket for monitoring or for private

listening. The speakers are automatically dis-

connected when headphones are connected.

AC POWER

Connect one end of the mains lead to the AC

INPUT ~ socket and the other end to an AC

outlet.

Note:

• The installed batteries are automatically dis-

connected when the mains lead is con-

nected to the unit.

• The FUNCTION switch is mounted on the

secondary side. The unit is not disconnected

from mains, even switched off.

BATTERY POWER

Installing batteries

Install eight “D/R20” batteries (not supplied) as

shown below.

56 12

43 87

MCD-ZX100F/AU 7/5/04, 10:10 AM4

Use compact discs bearing the symbol shown

below. In addition to conventional 12 cm CDs,

this system can be used to play 8 cm CDs

without an adapter.

1. Set the FUNCTION switch to CD.

2. Press the CD compartment lid (OPEN/

CLOSE portion) to open it.

3. Place the disc with the label facing up on

the turntable. (Place only one disc at a time.)

4. Press the CD compartment lid (OPEN/

CLOSE portion) to close it.

The total number of tracks on the disc ap-

pears on the display.

CD PLAY

6. Press the nbutton to end disc play.

When the last track has been played, the

player stops automatically.

7. To turn the CD player off, set the FUNCTION

switch to TAPE/OFF.

Note:

Do not open the CD compartment during CD

play. Always press the nbutton and wait for the

disc to stop rotating before opening the CD

compartment.

This unit can play back the CD-R/RW as well.

However, some CD-R/RWs can not be played

back depending on the recording conditions.

5. Press the ibutton.

The current track number appears. Play

starts from the first track.

• To start play from the desired track, se-

lect the track by using the for e

button, then press the ibutton.

Note:

If no disc is loaded, “no” appears. If the disc

is loaded with the label facing down “Er”

appears. If these occur, load the disc cor-

rectly or replace the damaged disc.

Label facing up

Notes on handling compact discs

• Do not expose the disc to direct sunlight,

high humidity or high temperatures for ex-

tended periods of time.

• Discs should be returned to their cases af-

ter use.

• Do not apply paper or write anything on the

disc surface.

• Handle the disc by its edge. Do not touch

the playing surface (glossy side).

• Fingerprints and dust should be carefully

wiped off the playing surface of the disc with

a soft cloth.

Wipe in a straight motion from the center to

the outside of the disc.

• Never use chemicals such as record clean-

ing sprays, antistatic sprays or fluids, ben-

zene or thinner to clean compact discs.

Temporarily stopping play

Press the ibutton, The current track number

blinks on the display. To resume play, press the

button again.

Skip play

To skip to track 6 while track 3 is playing, press

the ebutton repeatedly until “06” appears on

the display. To skip back to track 3 while track 6

is playing, press the fbutton repeatedly until

“03” appears.

Search (forward/reverse)

If the eor fbutton is pressed during play,

the player will search at high speed in the for-

ward or reverse direction while the button is

being pressed. When the button is released,

normal play will continue.

MCD-ZX100F/AU 7/5/04, 10:10 AM5

PROGRAMMED PLAY

Up to 20 tracks on a disc can be programmed for

play in any order.

• To begin the programming procedure, se-

lect “CD” function first.

• The same track can be programmed more

than once.

• Load a disc that you want to programme

before starting programmed play.

1. Press the nbutton if necessary.

2. Press the MEMORY button, the “PROG.”

and “ ” blink.

Repeat play

Press the REPEAT button before or during play

(or programmed play).

Each time the button is pressed, the repeat

mode changes as follows.

1. Set the FUNCTION switch to TAPE.

2. Press the STOP/EJECT button. The cas-

sette holder opens.

3. Load the cassette into the cassette

holder.

After loading the cassette, push the cas-

sette holder back into position.

4. Press the PLAY button to begin playback.

5. Press the STOP/EJECT button to stop

playback at any time. Press it again to re-

move the cassette.

When the end of the tape has been

reached, the tape stops automatically.

Note:

• Use the normal tape (TYPE 1).

• Endless tapes cannot be used.

• Do not use C-100 (or longer) tapes. They

may jam in the mechanism.

Pause

Press the PAUSE button to temporarily stop

playback or recording. Press it again to resume

operation.

Fast forward and rewind

Press the F.FWD or REW button. When the

desired location has been reached, or the tape

has been wound to the end, press the STOP/

EJECT button.

Automatic stop system

At the end of the tape while recording or playing

back, the cassette deck stops automatically and

the buttons are released.

This system does not work in fast forward and

rewind operation. Be sure to press the STOP/

EJECT button when the end of the tape has

been reached.

Example (When using C-60 tape):

Press the STOP/EJECT button after approxi-

mately 2 minutes have elapsed under fast for-

ward and rewind operation.

LISTENING TO TAPES

Released

(Normal play mode)

REPEAT 1 appears

(Repeat one track) REPEATALL appears

(Repeat all tracks)

3. Select a track by using the for e

button.

4. Press the MEMORY button.

5. Repeat steps 3 - 4 to programme addi-

tional tracks.

6. Press the ibutton to start play.

“PROG.” remains lit.

When all programmed tracks have been

played, the player stops automatically.

• The programme contents are retained

in memory.

To cancel programmed play, press the nbutton.

Checking the programme

Each time the MEMORY button is pressed in the

stop mode, the programmed details sequentially

appear on the display.

WHAT TO DO IF ...

If an abnormal display indication or an operating

problem occurs, disconnect the mains lead and

remove all batteries. Wait at least 5 seconds

then reconnect the mains lead and reinstall the

batteries. Resume the operation.

MCD-ZX100F/AU 7/5/04, 10:10 AM6

To receive FM stereo broadcasts

Set the FM MODE switch to ST.

• If the signal from an FM stereo station is

weak and reception is poor, set the FM

MODE switch to MONO. The reception

may be improved, but the sound will be

monaural.

To improve reception

FM: Pull out the telescopic aerial and adjust

its position.

AM: Rotate the unit.

1. Set the FUNCTION switch to RADIO.

2. Select the desired radio band with the

BAND switch.

3. Tune in a desired station by turning the

TUNING control.

4. To turn the radio off, set the FUNCTION

switch to TAPE/OFF.

LISTENING TO THE RADIO

Recording copyright material without permis-

sion of the copyright owners is usually an

infringement. If you wish to re-record copyright

material, permission from the copyright owner is

necessary. SANYO does not approve of, and

cannot be held responsible for, any unlawful use

of this machine.

Recording compact discs (Synchronous

recording)

1. Load a blank cassette.

2. Select “CD” function.

3. Load the disc to be recorded.

• Select the track number if required.

• For programmed recording, programme

the material in advance (as described

under “PROGRAMMED PLAY”).

4. Press the REC button. The PLAY button is

engaged simultaneously and CD record-

ing starts.

5. Press the STOP/EJECT button to stop

recording.

Recording from the radio

1. Load a blank cassette.

2. Tune in the radio station to be recorded.

3. Press the REC button to start recording.

4. Press the STOP/EJECT button to stop

recording.

When beat is heard

Beat (a high-pitched noise) may sometimes be

heard during the recording of radio broadcasts.

If this occurs, set the BEAT CANCEL switch to 1

or 2 position that reduces the level of the beat

noise.

Safeguards against accidental erasure

To protect side A, break out tab (1). To protect

side B, break out tab (2).

• To erase or record a protected cassette,

cover the tab openings with adhesive tape

(3).

Note:

The REC button cannot be depressed when

using a protected cassette.

RECORDING

MCD-ZX100F/AU 7/5/04, 10:10 AM7

Cleaning the tape heads

To ensure continued high performance, use a

cleaning tape (available from your local audio

dealer) to clean the head block of the deck after

about every 10 hours of use.

Cleaning the unit

Clean the outside of the unit with a clean soft

cloth, moistened with lukewarm water. Do not

use benzene, thinners, or alcohol since they will

mar the finish of the surfaces.

MAINTENANCE

Cleaning the CD player Iens

The lens should never be touched. If dust is on

the lens, blow it off using a camera lens blower.

(Consult your dealer.)

MCD-ZX100F/AU 7/5/04, 10:10 AM8

CD player

Channels:

2-channel stereo

Sampling frequency:

44.1 kHz

Pick-up:

Semiconductor laser

Laser output:

0.6 mW (Continuous wave max.)

Wave length:

790 nm

Wow/Flutter:

Below measurable limits

Radio

Reception frequency:

FM: 87.5 ~ 108 MHz

AM: 526.5 ~ 1606.5 kHz

Cassette deck

Track system:

4-track, 2-channel stereo

Erasing system:

Magnet erase

Tape speed:

4.75 cm/sec.

Frequency response:

80 ~ 12,000 Hz

Fast forward/rewind time:

Approx. 110 sec. (C-60)

General

Output power:

1W/ch (DC max.)

Speakers:

10 cm x 2

Terminals:

PHONES: 32 ohms

Power source:

AC: 230 ~ 240V, 50Hz

DC: 12V, 8 “D/R20” batteries

Dimensions:

300 (W) x 166 (H) x 265 (D) mm

Weight:

Approx. 2.7 kg (not including batteries)

Specifications subject to change without notice.

SPECIFICATIONS

MCD-ZX100F/AU 7/5/04, 10:10 AM9

(AU) 8804761100001 SANYO Electric Co., Ltd.

Printed in China

MCD-ZX100F/AU 7/5/04, 10:10 AM10

Andere Handbücher für MCD-ZX100F

Inhaltsverzeichnis

Andere Sanyo Kassettenspieler Handbücher

Sanyo

Sanyo MCD-ZX100F Bedienungsanleitung

Sanyo

Sanyo VHR-610 Bedienungsanleitung

Sanyo

Sanyo JJ-P4 Bedienungsanleitung

Sanyo

Sanyo MR-410 Bedienungsanleitung

Sanyo

Sanyo VHR-550 Bedienungsanleitung

Sanyo

Sanyo MCD-Z12F Betriebsanleitung

Sanyo

Sanyo M-G12 Bedienungsanleitung

Sanyo

Sanyo MCD-Z165F Bedienungsanleitung

Sanyo

Sanyo MCD-S730F Bedienungsanleitung

Sanyo

Sanyo M9994K Bedienungsanleitung

Sanyo

Sanyo MG-3 Bedienungsanleitung

Sanyo

Sanyo VHR-VX200 Bedienungsanleitung

Sanyo

Sanyo M9998K Bedienungsanleitung

Sanyo

Sanyo dcf150 Bedienungsanleitung

Sanyo

Sanyo MCD-S660F Bedienungsanleitung

Sanyo

Sanyo MCD-Z8F (AU) Bedienungsanleitung

Sanyo

Sanyo MCD-Z38F (AU) Bedienungsanleitung

Sanyo

Sanyo MCD-ZX200F Bedienungsanleitung

Sanyo

Sanyo FXR-303GB Bedienungsanleitung

Sanyo

Sanyo MCD-Z250F Bedienungsanleitung

Sanyo

Sanyo MCD-Z31F Bedienungsanleitung

Sanyo

Sanyo MCD-Z18F Bedienungsanleitung

Sanyo

Sanyo M GP9 Bedienungsanleitung

Sanyo

Sanyo MCD-Z100F Bedienungsanleitung

Beliebte Kassettenspieler Handbücher anderer Marken

Aiwa

Aiwa TP-VS535 Bedienungsanleitung

Philips

Philips AW 7300 Bedienungsanleitung

Philips

Philips Video Cassette Recorder Bedienungsanleitung

Yamaha

Yamaha MT8X Bedienungsanleitung

Sherwood

Sherwood Newcastle D-480 Bedienungsanleitung

Manta

Manta MA408 Bedienungsanleitung

GPO

GPO W0162B Bedienungsanleitung

Sony

Sony HST-471 Bedienungsanleitung

Sharp

Sharp JC-AV1 Bedienungsanleitung

Pioneer

Pioneer CT-W103 Bedienungsanleitung

Aiwa

Aiwa HS-JX899 Bedienungsanleitung

Sony

Sony TC-K615S Bedienungsanleitung

Sony

Sony CFS-B15 - Am/fm Stereo Cassette Recorder Bedienungsanleitung

Sony

Sony WMFS220 - Portable Sports AM/FM Cassette... Bedienungsanleitung

Aiwa

Aiwa HS-TA21 Bedienungsanleitung

Aiwa

Aiwa CS-P77 Bedienungsanleitung

Sony

Sony Pressman TCM-465V Bedienungsanleitung

Sony

Sony WALKMAN WM-GX808 Bedienungsanleitung