Sanyo VSP-8000 Bedienungsanleitung

FILE NO.

REFERENCE No.SM5310327

L8CSB/US,XE

NOTE: 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.

3. N.S.P. : Not available as service parts.

Design and specifications are subject to change without notice.

(Product Code : 117 523 55)

(U.S.A., Canada)

VSP-8000

SERVICE MANUAL

System controller

CONTENTS

SPECIFICATIONS .................................................................... 3

1. DISASSEMBLY ..................................................................... 4

2. ADJUSTMENT ...................................................................... 6

3. REWRITING THE SOFTWARE ............................................ 7

4. PARTS LIST ....................................................................... 10

CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS...........C1

Product safety should be considered when a component replacement is mand in any area of this unit.

Components indicated by the symbol ( ) in the parts list and schematic diagram designate components in which safety can

be of special significance. It is particularly recommended that only parts designated on the parts list in this manual be used for

component replacement designated by the symbol. No deviations from resistance, wattage or voltage ratings may be made for

replacement items designated by the symbol.

PRODUCT SAFETY NOTICE

(Product Code : 117 523 54)

(Europe)

(Taiwan, Korea)

VSP-8000

- 2 -

- 3 -

SPECIFICATIONS

NOTE: The specifications and external appearance of this unit are subject to change without notice.

: RS 485

: RJ-11:2 terminals

Push-lock: 1 pair

: D-SUB (9-pin): 1 port

: Address: 3-bit DIP switch

Termination: 1-bit DIP switch

: 2400, 4800, 9600, 19200 bps

: 15 groups

: Total: 256 devices

Controllers: 5 devices

Multiplexers, timelapse VCRs, cameras, and digital video recorder: 128 devices

each

: 64 devices

: Temparature: 0 to 40 °C

Relative humidity: 80 % or less

: Temparature: -20 to 60 °C

Relative humidity: 80 % or less

: 12 V DC

: 4 W

: 375 (W) x 55 (H) x 165 (D) mm

: 1.5 kg

Communication method

Control terminals

RS-232C terminal

Address/termination switch

Communication speed (baud rate)

Max. no. of groups

Max. no. of connected devices

Dome-type cameras

Ambient conditions

Storage conditions

Power supply

Power consumption

External dimensions

Weight

- 4 -

Bottom Cover

Shield Case

LCD Assy

Cabinet

CP-1 BOARD

TB-2 BOARD

1. DISASSEMBLY

1-1. REMOVAL OF CABINET AND BOARD LOCATION

Fig. 1

- 5 -

CP-1 BOARD

TB-1 BOARD

TB-2 BOARD

TB-3 BOARD

LCD

OP-1 BOARD

OP-2 BOARD

Fig.2

Fig. 3

TB-1 BOARD

TB-3 BOARD

OP-1 BOARD

OP-2 BOARD

- 6 -

1. POWER VOLTAGE ADJUSTMENT

1. Adjust VR301 so that voltage of TP302 and TP301 is 5.00 ±

0.10 V.

2. LCD LEVEL ADJUSTMENT

1. Adjust VR302 so that voltage of TP305 and TP301 is 0.575

±0.025 V.

3. JOYSTICK ADJUSTMENT FOR DIRECTION

1. The pin of JK405 is short-circuited and makes the test mode.

2. The FUNCTION button and the number 2 button are pushed

at the same time, and LCD indication is made "TEST

CENTER".

Measuring Point Measuring Equipment Condition

Adj. Value

Digital voltmeter POWER ON

5.00 ±0.10 V

TP302,

TP301 (GND)

VR301

Adj. Location

2. ADJUSTMENT

Measuring Point Measuring Equipment Condition

Adj. Value

Oscilloscope POWER ON

0.575 ±0.025 V

TP305,

TP301 (GND)

VR302

Adj. Location

Fig. 5

TP301

VR302

TP302

TP305

VR301

CP-1 BOARD

3. Push the ENTER button, and set the adjustment mode, and

it confirms that it is indicated with "PLEASE SPIN JST AND

PUSH ENTER" in LCD.

4. It swings, and a circular movement is done about 2-3 laps

JOYSTICK to become a width maximum.

5. It becomes adjustment mode completion if a ENTER button

is pushed and indicated with "TEST MODE" in LCD.

Adjustment is made again if it is indicated with "PLEASE

SPIN JST AND PUSH ENTER" in LCD.

6. The short circuit of the JK405 pin is removed, and the test

mode is finished.

4. JOYSTICK ADJUSTMENT FOR THE ZOOM

1. The pin of JK405 is short-circuited and makes the test mode.

2. The FUNCTION button and the number 3 button are pushed

at the same time, and LCD indication is made "TEST ZOOM

CENTER".

3. Push the ENTER button, and set the adjustment mode, and

it confirms that it is indicated with "PLEASE SLIDE JST AND

PUSH ENTER" in LCD.

4. It swings, and it slides ZOOM lever to become a width

maximum.

5. It becomes adjustment mode completion if a ENTER button

is pushed and indicated with "TEST MODE" in LCD.

Adjustment is made again if it is indicated with "PLEASE

SLIDE JST AND PUSH ENTER" in LCD.

6. The short circuit of the JK405 pin is removed, and the test

mode is finished.

Measuring Point Measuring Equipment Condition

Adj. Value

Adjustment

mode

LCD indication

Joystick

Adj. Location

Measuring Point Measuring Equipment Condition

Adj. ValueAdj. Location

Adjustment

mode

LCD indication

Zoom lever

Fig. 4

RS-232C

CONNECTOR

RESET

RS-232C

CONNECTOR

JK-405

BUTTON

- 7 -

OK Cancel

Connection Description ?X

Name:

Icon:

Change Icon..

Country code:

Area code:

Phone number:

Connect using:

Configure..

OK Cancel

Connect To Settings

Direct to Com1

OK Cancel

COM1 Properties ?X

Bits per second:

Data bits:

Parity:

Stop bits:

Flow control:

Restore Defaults

Advanced...

Hardware

Port Settings

Open

Send Text File ?X

Look in:

File name:

Cancel

Files of type: All files (*.*)

34800

None

∗∗

Properties

3. REWRITING THE SOFTWARE

3-1. Setting up the computer

Use the Hyper Terminal which is compatible with Windows 95

, 98 or other.

1. Connect the RS-232C connector with the RS-232C con-

nector on the computer using an interlink serial interface

cable. Then turn on the power and start Windows 95 , 98 or

ohter.

2. Open Windows Explorer, and then run the file \Program

Files\Accessories\Hyper Terminal\Hypertrm.exe.

The Connection Description window appears.

3. Click the Cancel button in the Connection Description win-

dow, or enter your name and then click the OK button.

The Hyper Terminal window appears.

4. Click the File (F) button in the Hyper Terminal window, and

then click the Properties (R) button.

The Properties dialog box appears.

5. In the Properties dialog box, set Connect using (N) in Phone

Number to “Direct to COM”, and then click the Configure

(F) button.

The port Setting window of the COM1 Properties dialog box

appears.

6. In the Port Settings window, change the settings to match

the controller.

Speed: 4800, 9600, 19200 or 38400

Data bits: 8

Parity: None

Stop bits: 2

Flow control: Hardware

7. Click the OK button.

The Properties dialog box appears.

8. Click the OK button in the Properties window.

The Hyper Terminal window appears.

9. Click the Transmit (T) button in the Properties dialog box,

and then click the Send Text File (T) button.

The Send Text File dialog box appears.

10. Set File of Type (T) to “All files (*.*)”, and type the name of

the file to be transferred in File name (N).

This completes the computer settings.

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

RS-232C

CONNECTOR

RESET

RS-232C

CONNECTOR

JK-405

BUTTON

- 8 -

SANYO Controller

--:--:--

CLOCK SET

[V 2.00]REWRITE?

OK:ENTER NO:CLR

REWRITE PROGRAM

38400 8 N 2 HARD

REWRITE PROGRAM

3-3. Rewriting data

1. Follow the procedure in 3-1. Setting up the computer.

2. Turn on the power or the system controller, and check that

the initial display appears in the LCD. Then press the MENU

button to set to clock setting mode.

3. Press the 0 button and FUNCTION button simultaneously

to set to software rewriting mode.

The current version number appears in the system control-

ler LCD.

Press the CLEAR button if you want to cancel the opera-

tion.

4. Press the ENTER button to set to baud rate setting mode.

The baud rate setting display appears in the system con-

troller LCD.

Press the CLEAR button if you want to cancel the opera-

tion.

5. Press the [+] and [-] buttons to select the baud rate setting.

6. Press the ENTER button to set to software rewrite standby

mode.

The rewrite standby display appears in the system control-

ler LCD.

3-2. Resetting the computer

If an rewriting error occurs, close the Hyper Terminal, and then

repeat the procedure in 3-1. Setting up the computer from step

Speed: 4800, 9600, 19200 or 38400

Data bits: 8

Parity: None

Stop bits: 2

Flow control: Hardware

←(+)BUTTON (–)BUTTON →

Fig. 10

Initial display mode

Software rewriting mode

Baud rate setting mode

Software rewrite standby mode

Clock setting mode

→ 3 8 4 0 0 ↔1 9 2 0 0 ↔9 6 0 0 ↔4 8 0 0←

RS-232C

CONNECTOR

RESET

RS-232C

CONNECTOR

JK-405

BUTTON

- 9 -

REWRITING...

ADDRESS:0010

REWRITE PROGRAM

ERROR:30

REWRITE PROGRAM

COMPLETE

SANYO Controller

--:--:--

RD 2

TD 3

DTR 4

GND 5

DSR 6

RTS 7

CTS 8

2RD

4DTR

5GNG

6DSR

7RTS

8CTS

Controller side PC side

7. Click the Open (O) button on the computer screen.

The rewriting display appears in the system controller LCD.

If the software could not be rewritten, an error code appears

in the LCD.

If an error occurs, reset the computer (see “3-2. Resetting

the computer”), and then press the ENTER button and re-

peat the rewriting operation.

Caution:

If an error occurs, do not try to reset the computer by turn-

ing off the system controller power or pressing the RESET

button.

8. When software rewriting is complete, “REWRITE PROGRAM

COMPLETE”appears in the system controller LCD.

Press the ENTER button to the initial display appears in the

LCD.

9. Turn off the power, disconnect the serial cable, and then

install the panel to the rear of the system controller.

Table of error code

3-4. RESET button

The following three items can be cleared using the RESET

button.

1. Clock (time)

2. Password code for security lock (cancels the security lock)

3. Status list

Connection Description

COM1 Properties

Open

Send Text File ?X

Look in:

File name:

Cancel

Files of type: All files (*.*)

∗∗

Properties

Contents

Rewrite mode setting disabled

Access to rewriting prohibition adress

Rewriting operation error

Timeout error when reading

“: ”Data receiving error

ASCII code data error

Record type error

Checksum error

Data count error

Individual data error

Transfer timeout error

Filename error

Error code

Computer screen

Software rewriting mode

Software rewriting error indication

Software rewriting completion

Wiring diagram for RS-232C interlink serial interface cable

Initial display mode

4. PARTS LIST

N.S.P.: Not available as service parts.

CABINET AND CHASSIS PARTS

L8CSB/US

16 16

16 16 16 16 16 16

16 16

17 17

24 25

26 27

36 3738 39

48 49 50 51

60 6162 63

72 73

75 76 77 78 79 80 81

23 23

13 14

(N.S.P.)

83 83

Andere Handbücher für VSP-8000

Inhaltsverzeichnis

Andere Sanyo Steuereinheit Handbücher

Sanyo

Sanyo VAC-60 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung