Sanyo CRD-DV1 Bedienungsanleitung

DVD-R

Drive

CRD-DV1

OWNER’S

MANUAL

Page 2

Document No. Document Name

SANYO Electric Co., Ltd.

Revision History

(1/1)

1. Revision History

Revision No. Manager Change Description Check Approval

First Edition Newly issued

Page 3

Document No. Document Name

SANYO Electric Co., Ltd.

Included Document List

(1/1)

2. Included Document List

Document Name Document No. Page No.

General Description 1/3 ~ 3/3 4

Dimensions, External View and

Names and Functions of Each Part 1/2 ~ 2/2 7

Terminal Description 1/3 ~ 3/3 9

Environmental Conditions 1/1 12

Reliability 1/3 ~ 3/3 13

Lot No. Reliability Description 1/1 16

Safety Standards 1/1 17

Electrical Characteristics 1/3 ~ 3/3 18

Function Description 1/3 ~ 3/3 21

Handling Manual 1/1 24

Notes for Handling 1/5 ~ 5/5 25

Page 4

Document No. Document Name

SANYO Electric Co., Ltd.

General Description

(1/3)

General Description

(1) Model Name: CRD-DV1

(DVD-R drive with MAX ×12 speed reading, ×4 speed writing, CD-R drive with

MAX ×40 speed reading, ×24 speed writing, and ×12 rewriting)

(2) External View

External View

(3) General Specifications

1)Characteristics

* Half-height and built-in type

* Conforms to Orange Book Part 2, 3 & DVD-R for general specifications.

* Equipped with the newly developed automatic strategy LSI with the data reliability

enhanced.

* DVD-R drive with MAX ×12 speed reading(CAV), ×4 speed writing (CLV), CD-R drive with

MAX ×40 speed reading, ×24 speed writing, and ×12 rewriting)

* ATAPI is employed to enable high speed data transmission.

* Automatic loading mechanism

* Emergency disc ejecting function

* Data verifying function

* Media condition check function

* CD-DA read function

* BURN-Proof Technology implemented

“BURN-Proof” stands for Proof against Buffer Under Run error, not for proof against burning.

Page 5

Document No. Document Name

SANYO Electric Co., Ltd.

General Description

(2/3)

(4) Applications

Wide range of applications available, such as image data filing, management of CAD/CAM,

drawing data and financial affairs, audio data storage and electronic publication.

(5) Main Specifications

Items Specifications

Dimensions 148 (W) x 194.2 (D) x 42.3 (H) mm

Mass 1020 g

Recording Form Orange-book part 2, 3 Fixed packet

Disc-at-once Variable packet

Track-at-once

DVD-R for general 2.0

Disc at Once Recording

Incremental Recording

Front Panel Eject key, Emergency eject pinhole, LED (busy and write)

Headphone jack, Volume

Eject Automatic loading

Power Supply DC 5 ×(1 ± 5 %) V DC 12 ×(1 ±10 %) V

(6) Operational environment for the “write/rewrite” application software

Items Specifications

Host Machine IBM compatible PC (Celeron433 MHz or more) (Note 1)

OS MS-Windows 98SE/ME/2000/NT4.0/XP (Note 2)

Memory MS-Windows 98SE/ME/NT: 128 MB or more.

MS-Windows2000/WindowsXP: 128 MB required.

256 MB recommended.

Hard disc Empty Storage Capacity: 5GB or more (20GB or more recommended)

Average seek time: 20 ms or less

Transmission rate: 2 MB/s or more

Do not use the HDD which caliblates thermaly during operation.

CD-R (×4 ~ ×24) : MITSUI CHEMICAL , HITACHI MAXELL,

RITEK, ACER, CMC (T.B.D)

CD-RW (×4 ,×10, ×12) :MITSUBISHI CHEMICAL, RICOH

(T.B.D) (Note 3)(Note 4)

Recommended Media

DVD-R(×1, ×2, ×4)MITUBISHI CHEMICAL,HITACHI MAXELL,

PIONEER VIDEO,TAIYO YUDEN,TDK (T.B.D)

(Note 1) If any problem occurs, negotiation is required to settle the matter.

(Note 2) Windows NT4.0 doesn’t have ATAPI-DMA-Driver in the standard.

Therefore, this Drive and IDE-HDD function with PIO-Mode.

(Note 3) We intend to add the proper media one by one in the near future.

(Note 4) Please refer to the latest information on the web: www.burn-proof.com.

Page 6

Document No. Document Name

SANYO Electric Co., Ltd.

General Description

(3/3)

(7)Scope

This specification is applied to the CD-R/RW/DVD-R drive “CRD-DV1” which is designed by

SANYO Electric Co., Ltd.

(8)Contents

1)Model No. CRD-DV1

2)Performance Write function onto CD-R/RW/DVD-R disc in combination with the write

application software and CD-ROM/DVD-ROM read function, in

combination with the CD-ROM/DVD-ROM application software.

3)Applications Write onto and read of the CD-R/RW/DVD-R disc.

Read of CD-ROM/DVD-ROM disc.

4)Dimensions Refer to the item “Dimensions and Dimensional Drawing”.

5)Notes for handling

Refer to the Manual and Notes for Handling.

6)Others

a.The specifications of this product are the same as in the delivery specifications.

If any fault or malfunction of the product occurs when it is used under any conditions

except for our guaranteed conditions, our company has no responsibility for the claim.

b.The specifications of this product are subject to change to enhance the performance.

c. The change of notice is issued when the specification is changed only.

d.If any doubt occurs regarding the contents of the specifications, negotiation is required to

settle the matter.

Page 7

Document No. Document Name

SANYO Electric Co., Ltd.

Dimensions, External View and Names and

Functions of Each Part

(1/2)

1. Dimensions and External View

(1) External View

Refer to the “General Description”.

(2) Dimensions and Dimensional Drawing

Refer to the attached document “Dimensions and Dimensional Drawing”.

(3) Names and Functions of Each Part on the Front Panel

Front Panel

1. Headphone

Terminal : The headphone with a stereo mini plug is connected through this terminal.

2. Headphone

Volume : The volume of the headphone connected to the headphone terminal is adjusted

using this volume dial. When the volume dial is turned right, the volume becomes

louder.

3. BUSY

indicator : Command executing.

ON Reading disc and accessing condition

ON-AND-OFF TOC reading condition & EJECT condition

OFF Pause or Stop condition

4. WRITE

indicator : This is ON when the data is written onto the disc.

5. EJECT key : The disc is ejected, using this key. This key is available even when the tray is

moving. When the PRV command is transmitted from HOST or during writing,

this key is not available.

6. Emergency

eject pinhole : If the disc is not ejected when the key is pressed, because of power failure or run

away of the software, this pinhole is used to take out the disc.

7. Disc tray : The disc is placed on this tray.

1 2 4

Page 8

Document No. Document Name

SANYO Electric Co., Ltd.

Dimensions, External View and Names and

Functions of Each Part

(2/2)

(4) Names and Functions of Each Part on the Rear Panel

Rear Panel

1. ANALOG AUDIO

Connector :

The audio analog signal output connector.

2. CS/SL/MA Pins : By covering the jumper block, these pins are used to set the CD-R drive to

either a Master or Slave mode to work with the hard disk drive inside the

personal computer.

Default is Master.

3. IDE Connector : Using a 40-pin connector, the ATAPI terminal of the host computer is

connected to this connector.

4. DC Connector : This is the power supply terminal.

5. FACTORY USE ONLY

Pins : These pins are used only for the test in the factory. Don’t cover the jumper

block on them.

6. DIGITAL AUDIO

Connector

: The audio digital signal output connector.

7. UDMA Pins

: UDMA mode is enabled by covering the jumper block on the 2 pins of the

UDMA jumper terminals.

Default is ON.

(Note 1) In case of using some personal computes, UDMA mode need

to be disable.

1 2 3 4

5 7

Page 9

Document No. Document Name

SANYO Electric Co., Ltd.

Terminal Description

(1/3)

1. AUDIO Terminals

The audio signal is output through these terminals. These terminals are used when the sound

board applicable to these terminals, is attached to the personal computer.

2. Jumper Terminals (CS/SL/MA)

SLSL

SL Jumper Terminals:

To set to Slave mode, cover the jumper block on the 2 pins of the SL jumper terminals.

If the IDE controller of the personal computer supports two devices, set the CD-R drive to Slave

mode. The hard disk drive inside the personal computer is set to Master mode.

MAMA

MA Jumper Terminals:

To set to Master mode, cover the jumper block on the 2 pins of the MA jumper terminals.

If the IDE controller of the personal computer supports up to four devices, set the CD-R drive to

either a Primary Slave, a Secondary Master or a Secondary Slave mode. Primary or Secondary

is set up by the IDE controller, while Master or Slave mode is set up by covering the jumper

block on the rear of the CD-R drive. The hard disk drive inside the personal computer is set to

Primary Master mode.

CSCS

CS Jumper Terminals:

If the personal computer is supporting CSEL (Cable Select) signal, cover the jumper block on

the 2 pins of the CS jumper terminals and remain Slave and Master open.

An exclusive interface cable is necessary.

Slave

Master

Use CSEL

umper

block

umper

block

R-ch GND L-chGND

Inhaltsverzeichnis

Andere Sanyo DVD-Laufwerk Handbücher

Sanyo

Sanyo CRD-BPDV2 Bedienungsanleitung

Beliebte DVD-Laufwerk Handbücher anderer Marken

Panasonic

Panasonic CFVDM732U - DVD Bedienungsanleitung

LG GSA-4160B Bedienungsanleitung

Panasonic

Panasonic VW-BN1 - DVD-RW / DVD-RAM Drive Bedienungsanleitung

Sony

Sony DRU-500AX Bedienungsanleitung

LG GSA-2164D Bedienungsanleitung

Plextor

Plextor PX-755SA Bedienungsanleitung

Pioneer

Pioneer BDC-TD03RS Betriebsanleitung

Samsung

Samsung SM-332B Bedienungsanleitung

Freecom

Freecom MOBILE DVD RW II Bedienungsanleitung

Plextor

Plextor PX-712 Bedienungsanleitung

NEC

NEC ND-3550A Bedienungsanleitung

Emprex

Emprex Slim Writer DVD R/RW USB 2.0 External Drive Bedienungsanleitung

Philips

Philips PCA532K Bedienungsanleitung

Sony

Sony AD-7740H Bedienungsanleitung

Philips

Philips PCDV5016 Series Referenzhandbuch

Pioneer

Pioneer LaserMemory DVD-115 Bedienungsanleitung

Samsung

Samsung SE-S224Q Bedienungsanleitung

IBM

IBM 71P7285 Bedienungsanleitung