Sanyo VMC-L1015 Bedienungsanleitung

INSTRUCTION MANUAL

Color TFT LCD monitor

VMC-L1015

VMC-L1017

VMC-L1019

About this manual

• Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference.

• This manual gives basic connections and operating instructions for 3 models (VMC-L1015, L1017 and L1019).

    !" $%" &'()

–1–

Information to User

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

DO NOT INSERT ANY METALLIC OBJECT

THROUGH THE VENTILATION GRILLS.

Explanation of graphical Symbols

FCC COMPLIANCE STATEMENT

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous

voltage”within the product's enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

FCC INFORMATION: THIS EQUIPMENT HAS

BEEN TESTED AND FOUND TO COMPLY WITH

THE LIMITS FOR A CLASS B DIGITAL DEVICE,

PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE

REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE

EQUIPMENT IS OPERATED IN A COMMERCIAL

ENVIRONMENT. THIS EQUIPMENT

GENERATES, USES, AND CAN RADIATE RADIO

FREQUENCY ENERGY AND IF NOT INSTALLED

AND USED IN ACCORDANCE WITH THE

INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A

RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE

THE USER WILL BE REQUIRED TO CORRECT

THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT

EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID

THE USER'S AUTHORITY TO OPERATE THE

EQUIPMENT.

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN

INTERFERENCE-CAUSING EQUIPMENT

REGULATIONS.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A

RESPECTE TOUTES LES EXIGENCES DU

RÈGLEMENT CANADIEN SUR LE MATÉRIEL

CAUSANT DES INTERFÉRENCES.

    !" $%" &'()

–2–

Precautions

•Use only the power source specified on the unit.

•When not using this unit for a long period of time, or when

cleaning it, be sure to disconnect the power plug from the

AC outlet.

•Do not allow anything to rest on the power cord. And do

not place this unit where people will tread on the cord. Do

not overload wall outlets or power cords as this can result

in a fire or electric shock.

•Avoid using this unit under the following conditions:

- in extremely hot, cold or humid places,

- in dusty places,

- near appliances generating strong magnetic fields,

- in places subject to direct sunlight,

- in badly ventilated places,

- in automobiles with doors closed.

•Do not cover the ventilation slots while in operation as this

could obstruct the required ventilation flow.

•When dust accumulates on the screen surface, clean it

with a soft cloth.

•Unplug this unit from the AC outlet and refer servicing to

qualified service personnel under the following conditions:

- when the power cord is frayed or the plug is damaged,

- if liquid has been spilled into the unit,

- if the unit has been dropped or the cabinet has been

damaged,

- when the unit exhibits a distinct change in

performance.

•Do not attempt to service this unit yourself as opening or

removing covers may expose you to dangerous voltage or

other hazards. Always refer servicing to qualified service

personnel.

Contents

Names of controls/parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Connection instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Monitoring display adjustment. . . . . . . . . . . . . . . . . . . . . . . 6

Computer display adjustment . . . . . . . . . . . . . . . . . . . . . . . 7

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

External dimensions & adjustable angle . . . . . . . . . . . . . . . 9

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Features

•Multilingual menu support

English/Chinese/French/German/Spanish/Italian/

Japanese

•Picture in Picture (PIP) function

•NTSC/PAL automatic select

Accessories

■

■■

■AC adapter ■

■■

■AC cord

■

■■

■VGA connecting cable

 *   !" $%" &'()

–3–

Names of controls/parts

Front view

Rear view

POWERMODEAUTOMENU

Viewing area

Power button (POWER)

Volume adjustment control Power indicator

light

Input mode control (MODE)

Contrast adjustment control

Brightness adjustment control

OUT

Signal

BNC IN

DC IN

VGA IN

BNC OUT

Y/C IN

Y/C OUT

AUDIO OUT AUDIO IN

VGA signal input terminal (VGA IN)

S-Video signal input terminal (Y/C IN)

Audio-In terminal

(AUDIO IN)

S-Video signal output terminal

(Y/C OUT)

Adjustment control (MENU)

For fine adjustment. (Pages 6, 7)

For adjusting the screen contrast.

(Page 5)

Turns the power on or off.

Adjusts the brightness of the screen. (Page 5)

•Select the appropriate menu item.

Adjusts the volume level. (Page 5)

Changes the input mode. (Page 5)

For audio input.

Audio-Out terminal

(AUDIO OUT)

For audio output.

Power input terminal (DC IN) (Page 4)

For the input of a computer

VGA (Video Graphics Array) signal.

Composite signal input terminal

(BNC IN)

For the input of CCD camera surveillance image

signal.

Composite signal output terminal

(BNC OUT)

Sends the image to BNC IN.

For the input of S-Video signal.

For the output of S-Video signal.

Pin number

GND (Y)

GND (C)

•For adjustment, change the setting value.

•Select the appropriate menu item.

Automatic display adjustment control

(AUTO)

Automatically adjusts the screen

(for use with VGA connections). (Page 5)

 +   !" $%" &'()

–4–

Connection instructions

Connect the devices to the connection terminals at the rear panel.

•When connecting, ensure the power supply to each unit is switched off.

BNC IN

DC IN

VGA IN

BNC OUT

Y/C IN

Y/C OUT

AUDIO OUT AUDIO IN

Monitor TV etc.

Hard-disk recorder etc.

AUDIO LINE IN

VGA OUT

BNC OUT

Y/C (S-VIDEO) OUT

Y/C (S-VIDEO) IN

AUDIO LINE OUT

BNC IN

CCD Camera etc.

(Included VGA connecting cable)

Computer

: Input signal

: Output signal

Amplifier etc.

Connection example

•The other devices and connection cables required are sold separately.

(Refer to 2for steps.)

Connect the power cord (DC 12V).

Connect the included AC adapter plug to the power input terminal (DC IN), and then connect the AC cord between the

AC adapter and AC outlet.

•Once the power cord is

connected, the power supply will

reach the main unit.

AC adapter

(Included)

AC cord (Included)

 ,   !" $%" &'()

–5–

Instructions for use

1Switch the power button (POWER) on.

RThe power indicator light will light up.

2Press the input mode control (MODE) and

choose the input signal.

•Press once and the currently selected signal will be

displayed. Press again and the available signal

options will be displayed in the order shown below.

(The symbol for selected option will be displayed in

the upper left of the screen.)

3Adjust the brightness ( ) [0 –51].

•As the brightness is being adjusted, the symbol

will be displayed in the upper left of the screen.

4Adjust the contrast ( ) [0 –51].

•As the contrast is being adjusted, the symbol

will be displayed in the upper left of the screen.

AAdjust the volume [0 –51].

•As the volume is being adjusted, the

symbol will be displayed in the upper left of the

screen.

BScreen automatic adjustment

(For VGA signal)

RThe clock, phase and screen position are

automatically adjusted according to the

specified input signal.

5When viewing is finished, press the

power button (POWER).

RThe power indicator light will go out.

POWERMODEAUTOMENU

1 5

•When the signal is changed, initially a blue screen

will be displayed, followed by the display of the

chosen signal 2-3 seconds later.

•When there is no input detected on the chosen

signal, “NO SIGNAL”will be displayed.

•If the power to the connected device is off, “VIDEO

LOSS”will be displayed.

POWER

Power indicator light

MODE

: VGA signal (VGA IN)

: DVI signal (DVI IN)

Cannot be used

: Composite signal (BNC IN)

: S-Video signal (Y/C IN)

: Component signal (Y, Cb, Cr IN)

Cannot be used

Decrease Increase

AUTO

    !" $%" &'()

–6–

Monitoring display adjustment

Adjustment method for : Composite/ : S-Video signal selection

■

■■

■Operation

■

■■

■Adjustment item

* May differ depending on location of purchase.

Item Description Parameters Default setting

Color Adjust the color. 0 –51 30

Tint Adjust the tint (only available for NTSC signal). 0 –51 25

Brightness Adjust the brightness. 0 –51 25

Contrast Adjust the contrast. 0 –51 25

Sharpness Adjust the sharpness. 0 –51 27

Volume Adjust the volume. 0 –51 30

H-Position Adjust the horizontal position of the display. 0 –51 25

Language Select the language of the display.

English, Chinese,

French, German,

Spanish, Italian,

Japanese

English

Color Temp. Select the color temperature. 9300°K, 6500°K,

Standard 9300°K*

Scan Select the image scan type. Over, Under, Full, 1:1 Full

PIP Select to use Picture in Picture, showing an additional smaller

display in the upper left corner. VGA, Off Off

Recall Pressing the +, –buttons together will return the settings to the

default setting. ––

1Press the adjustment control (MENU).

2Choose the adjustment item.

3Change the setting value.

4If necessary, repeat

steps 2and 3.

POWERMODEAUTOMENU

12 3

Composite In NTSC

English

9300K

Full

Off

Setting valueAdjustment item

Color

Tint

Brightness

Contr st

Sh rpness

Volume

H-Position

L ngu ge

Color Temp.

Sc n

PIP

Rec ll

RAt the top of the screen, an adjustment panel as shown in the diagram

to the right will be displayed.

Down Up

•Pressing the adjustment control (MENU) again, or waiting for a number of

seconds will cause the adjustment panel to disappear.

•The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.

•The default language display is English. If the language setting is changed, the menu display will be in the language chosen.

 -   !" $%" &'()

–7–

Computer display adjustment

: Adjustment method for VGA signal selection

■

■■

■Operation

■

■■

■Adjustment item

* Use this when pressing the automatic display adjustment control (AUTO) (page 5) does not achieve the desired result. Also, by pressing the

automatic display adjustment control (AUTO), these values will be changed.

Item Description Parameters Default setting

Brightness Adjust the brightness. 0 –51 25

Contrast Adjust the contrast. 0 –51 25

H-Position* Adjust the horizontal position of the display. 0 –51 25

V-Position* Adjust the vertical position of the display. 0 –51 31

Clock* Adjust the clock (when vertical lines can be seen etc.).

•Make fine adjustments until the vertical lines disappear. Adjusting the

clock will also change the width of the display.

0 –51 25

Phase* Adjust the phase (when the screen is flickering, etc.). 0 –51 13

Color Temp. Select the color temperature. 9300°K, 6500°K,

User color User color

User Color R Adjust the Red (when Color temp. is set to User color). 0 –51 51

User Color G Adjust the Green (when Color temp. is set to User color). 0 –51 51

User Color B Adjust the Blue (when Color temp. is set to User color). 0 –51 51

OSD H-Pos. Adjust the horizontal position of the adjustment panel. 0 –51 25

OSD V-Pos. Adjust the vertical position of the adjustment panel. 0 –51 25

Volume Adjust the volume. 0 –51 30

PIP Select to use Picture in Picture, showing an additional smaller

display in the upper left corner.

Composite, S-Video,

Component, Off Off

Language Select the language of the adjustment panel.

English, Chinese,

French, German,

Spanish, Italian,

Japanese

English

Recall Pressing the +, –buttons together will return the settings to the

default value. ––

•The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.

•The default language display is English. If the language setting is changed, the menu display will be in the language chosen.

Setting valueAdjustment item

POWERMODEAUTOMENU

12 3

VGA IN 1024x768@60Hz

Brightness

Contr st

H-Position

V-Position

Clock

Ph se

Color Temp.

User Color R

User Color G

User Color B

OSD H-Pos.

OSD V-Pos.

Volume

PIP

L ngu ge

Rec ll

User color

Off

English

Press the adjustment control (MENU).

RAt the top of the screen, an adjustment panel as

shown in the diagram to the right will be

displayed.

Choose the adjustment item.

Change the setting value.

If necessary, repeat steps 2and 3.

Down Up

•Pressing the adjustment control (MENU) again, or waiting for a number of seconds will cause

the adjustment panel to disappear.

    !" $%" &'()

–8–

Troubleshooting

Before requesting service or repair, perform a check as described in the following section. If this does not work, return the unit to

the place of purchase or authorized repair agent to undergo adjustment.

Problem Points to check

No image is displayed.

•Is the connected device outputting a video signal?

•Is the connection correct? (Page 4)

•Using the input mode control (MODE), is the correct input signal selected? (Page 5)

No sound is heard.

•Is the connected device outputting an audio signal?

•Is the connection correct? (Page 4)

•Check the volume level is not set to 0. (Page 5 –7)

The display is dark. •Are the brightness and contrast set to the correct level? (Page 5 –7)

The display is flickering. •Is there a device nearby which is emitting a strong magnetic field? If so, remove it.

Colors displayed in different parts of

the display are strange.

•Is there a speaker or magnet nearby?

After removing the object, turn the unit off for at least 30 minutes and switch it on

again.

There is a hissing noise. •Effects of this type may be caused by temperature changes in the room but do not

indicate a fault.

When 2 or more monitors are next

to each other, the display shakes or

there is some distortion.

•The monitors are interfering with each other. Increase the distance between them.

    !" $%" &'()

–9–

External dimensions & adjustable angle

■

■■

■VMC-L1015

■

■■

■VMC-L1017

■

■■

■VMC-L1019

About the tilt adjustment

The screen may be adjusted 5°forward and 40°backward.

When adjusting the screen tilt, use a soft cloth to prevent damaging the screen.

After adjusting the tilt, check the cables to ensure the monitor is not pulled over.

5˚

40˚

353.2

170.0

36.4

229.1

286.052.0

338.0

305.2

Side viewFront view Angles of adjustment

(Unit: mm)

Side viewFront view Angles of adjustment

(Unit: mm)

5˚

40˚

375.0

170.0

41.6

273.4

317.752.0

369.7

341.0

Side viewFront view Angles of adjustment

(Unit: mm)

5˚

40˚

421.2

170.0

44.6

304.0

353.951.7

405.6

379.4

    !" $%" &'()

Andere Handbücher für VMC-L1015

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sanyo Monitor Handbücher

Sanyo

Sanyo VMC-8619PA Bedienungsanleitung

Sanyo

Sanyo VMC-L2619 - High Performance Professional 19" LCD... Bedienungsanleitung

Sanyo

Sanyo PLV-55WM1 Bedienungsanleitung

Sanyo

Sanyo VMC-8114P Bedienungsanleitung

Sanyo

Sanyo CE52LH2WP Bedienungsanleitung

Sanyo

Sanyo PDP-32H1ENV Bedienungsanleitung

Sanyo

Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel... Bedienungsanleitung

Sanyo

Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel... Bedienungsanleitung

Sanyo

Sanyo PID-47NE1 Bedienungsanleitung

Sanyo

Sanyo PDP-42H2A Bedienungsanleitung

Sanyo

Sanyo CE42LM4WPR-E Bedienungsanleitung

Sanyo

Sanyo CE52SR2 - 16:9 Bedienungsanleitung

Sanyo

Sanyo PID-42NE1 Merkblatt

Sanyo

Sanyo CE42LM6WP Bedienungsanleitung

Sanyo

Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel... Bedienungsanleitung

Sanyo

Sanyo CE52SR3 Bedienungsanleitung

Sanyo

Sanyo VMC-8415FP Bedienungsanleitung

Sanyo

Sanyo LMU-TK40C1/US Bedienungsanleitung

Sanyo

Sanyo PDP-42H1ENV Bedienungsanleitung

Sanyo

Sanyo VMC-8214P Bedienungsanleitung

Sanyo

Sanyo 32LM5WP Bedienungsanleitung

Sanyo

Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel... Bedienungsanleitung

Sanyo

Sanyo VMC-L1015 Bedienungsanleitung

Sanyo

Sanyo CE42WPX1 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung