Sanyo CAP3310TXN Bedienungsanleitung

Instruction

Manual Colour

Television

STEREO*

SURROUND (ALL IN ONE:

TELETEXT

S7ERMINAL

VIDEO MULTI TERMINAL

(PAL/NTsc/NTsc4.43)

MESSAGE

CALENDAR

HELP MESSAGE K

Model CAP3310TXN

CZP3310TX

*Model CAP331 OTXN –NICAM Digital Stereo Decoder and West Germany Stereo Decoder built in.

*Model CZP331 OTX –NICAM Digital Stereo Decoder built in.

Introduction

HHi-Fistereosoundcircuitwith %r-

round Circuit.

ALL IN ONE (Surround speaker built in).

It’s easy to enjoy TV and video sound with the Surround

effect,

SurroundSystem

The sounds that we hear in anatural listening

environment consist of those which reach

our ears directly from the sound source, and

those which reach us indirectly after being

reflected off of the floor, walls, and other sur-

rounding objects. The Surround System elec-

trically produces these direct and indirect

sounds, then sends them through speakers to

surround the listener with sound that isrich in

stereo presence.

Where to Place the TV for the best Surround Effect

●Do not place furniture or other objects any closer than 30 cm

from the sides of the TV. Placing objects directly next to the

sides of the TV will block the sound from the speakers.

●It is agood idea to place the TV in acorner of the room. This

allows the walls to serve as reflectors to achieve agreater

Surround effect.

9This Av Television Allows Free System

Expansion

●S-terminal is provided.

.Three videolaudio inputs and one audio output enable easy

VCR connection for tape playback and editing.

■MESSAGE, CALENDAR and HELP-

MESSAGE functions

In additional to standard TV functions, this set offers

the convenience of MESSAGE, CALENDAR and HELP

MESSAGE functions in 5language: English, German,

French, Italian and Spanish.

Electric Mains

The TV receiver is manufactured to utilize an AC VOLTAGE

SOURCE of 220-240 Volts, 50Hz.

Safety Precaution

When the TV receiver is not to be used for an extended period

of time, it is advisable to disconnect the AC power cord from

the AC outlet.

WARNING

To prevent fire or shock hazard, do not expose the unit to rain

or moisture.

High voltages are used in the operation of this TV set.

Do not remove the back from your set. Refer servicing to quali-

fied service personnel.

Aerial Connection

●Connect the cable with aplug from aUHF (or VHF) aerial to

the Ir aerial socket on the cabinet back.

-———-

_—— —=

—-—=

I(3I Ir+

~raerialsocket

.For all aerial circuit problems please consult your local deale-

Battery Installation (Remote Control Transmitter)

❑Remove the battery cover by sliding.

❑Install two “M” 1.5 volt batteries so that the “+“ and “-”

marks on the batteries match the”+” and” –” marks inside

the unit.

❑Close the battery cover.

Note: Replace the batteries when the TV set is showing the fol-

lowing symptoms:

Operation is unsteady or erratic, sometimes the TV set

does not work with transmitter. Discharged batteries

may leak and damage the unit. The normal life of batter-

ies should be from nine to ten months.

xFor the handling of these functions, please refer to

the separate operating manual.

–l–

Controls \f’ >

bSurround Speaker

@Main Speaker

‘~< J“~

Press to open

~Mam ON/OFF Switch

Remote Control Detector

Standby and Power Indicator

[of.,,,..,. .,,-,,. m~ON/OFF (I

Operation of the Receiver

‘witching on/off ●AUTO SHUTOFF

__BTo turn on the TV: This TV set incorporates the AUTO SHUT OFF function.

Press Mains ON/OFFswitch ~. Even if the TV is left on afteryou have gone to sleep,the

TV set changesto the standby mode within 10 minutes

●To turn offtheTV:

Press the Power ON/OFF button ~on the remote control afterallbroadcastshaveended.

transmitter, and the TV changes to the standby mode. During Note: AUTO SHUT OFF also functions for the AV mode even

the standby mode, the standby and power indicator illumi- when there is no signal being transmitted.

nates more brightly than during the power–ON mode. The remaining time for AUTO SHUT OFF is displayed on

Press this button ~to turn off the unit for short periods the screen.

of the time.

.Toturn on the TV from the standby mode:

Press one of these button.

Power ON/OFF (Q

(Remote control transmitter) Remaining time

au 1

Programme Selector ~‘10 AUTO PAUNTSC

(Remote control transmitter)

Volume @Programme selection

●TOcutoffthe mainspower completely: Press the right side (+)of the programme selector ~of the

Press the Mains ON/OFF switch ~. TV set, and the TV set will step up to the next station, i.e; 1, 2,

3...29, VCR1, VCR2, VCR3, 1,2,3 ...

Important! Be sure to set the Mains ON/OFF switch ~to the Press the left side (–), and the TV set will step down to the

off position, if the power failure occurs while view- previous station.

ing. –2–

(Operation of the Receiver)

Sound adjustments

●To adjust the sound volume:

Press +or– volume @button.

IASOUND

E9s Is GIBE------- 1

.Toadjust the bass, treble, balance and the depth of surround

effect:

Select the control function by pressing SOUND SELECT Q

button.

cEach time SOUND SELECT~ button is pressed, the con-

trol function changes as follows:

9: BASS

-------- +----t---

BAss

Icl”

~TREBLE

-------- +-- t-----

TREBLE

uBALANCE

-------- t--------

BALANCE

-SOUNO SURROUNDLEVEL

mllluallm------- ----mw((((u(----

1 1 L1

SOUND VOLUME SURROUND

LEVEL

Note: “SURROUND LEVEL’ will be skipped when the Sur-

@.... TV/VIDEO Selector

To watch the television programmed leave this switch in the

TV mode. When this switch is set to the VIDEO mode you can

enjoy the playback from the VCR or other AV equipment con-

nected to the AV input terminals.

Each time the TV/VIDEO Selector ~is pressed, the AV posi-

tion changes as follows:

l--.%LL&d&

TV mode ~

@.... Memory O

This function lets you store the settings (for colour, bright-

ness, contrast, video tone, tint, sound volume, bass, treble,

balance and Surround effect) in memory for both picture ar

the sound. Simply adjust the picture and sound as desiredY

then press the Memory 0@button. To recall these levels

from memory, press the Normalization ~0~ @button on

the remote control unit.

When Memory button

is pressed, “NORMAL’

is displayed,

INORMAL

.-- *+--- I

round effect is turned off. 0.... Headphone Jack ~

Insert the headphones plug into this jack to listen to either

Adjust the bass, treble, balance or the depth of surround ef-stereo or monaural sound via aheadphones set.

feet by pressing Volume @button. Note: No sound will be heard from the speakers when the

headphones plug is connected to this jack.

Pictureadjustments

elect the picture control function by pressing PICTURE

ELECT @button.

Each time PICTURE SELECT @button is pressed, the

control function changes as follows:

@COLOUR

mmalmlmlm-------

COLOUR

‘~ BRIGHT

mllllm DmDB------

BRIGHTNESS

J-L

‘INE TUNING VIDEO TONE

I(1 CONTRAST

●lBamllmm -------

1CONTRAST

K-x TINT

-------- t--+-----

TINT

OTE: “TINT” will be skipped during PAL mode.

❑Adjust the colour intensity, brightness, contrast, tint, video

tone or fine tuning by pressing Volume @button.

–3–

Remote Control Operation

~Programme Selector

@Colour System Selector

(AV mode only)

@Normahzizfou: \

Brightness

-Contrast

Video tone

TINT ~

(for NTSC and NTSC 4.43)

Note: This button has no

effect during PAL mode.

~1 _TVIVCR switch

/●For operation of the TV set,

set the TV/VCR switch to

“TV position.

Programme up (Press this button, and the programme

position step up to the next position.)

Programme down (Press this button, and the programme

position steps down to the previous position.)

~l%wer ON/OFF

@Off timer

~TV/VIDEO Selector

II @Channel Scanning

‘1

@Recall

@Sound mute

0Volume

~AUDIO SELECT

Fine tuning

@Bilingual A/B

@Stereo/Mono

@Surround ON/OFF

Main ON/OFF switch of the TV set must be in “ON” position Picture adjustments

before remote control operation is possible.

Point transmitter towards the TV set, then press the appropri- .To adjust the colour intensi~:

ate function button for the following controls. Press @(Colour) button.

‘m .... Power ON/OFF (!) Press Aor ~volume @button.

Press this button to switch TV set on.

To switch TV set off, press again. .TO adjust the brightness:

~.... Programme selection

●e.g. TO select programme number 17, press “l-” button and

then press “7” button ~within five seconds.

To select programme number 27, press “2-” button and

then press “7” button ~within five seconds.

■You can select any desired programme number directly

from standby mode.

.e.g. To directly select programme number 2from stand-

by mode, press the “2” button. The set is then

switched on, and the picture of programme number

2appears.

Todirectly select programme number 16 from stand-

by mode, press the “l-” button (after which the

Standby and Power indicator flashes), then press the

“6” button. The set isthen switched on, and the pic-

ture of programme number 16 appears.

Press @(Brightness) button.

Press Aor ~volume button.

●To adjust the picture contrast:

Press O(Contrast) button.

Press Aor ~volume button.

●TO adjust the video tone:

Press V. TON. button.

Press Avolume button.

-whap picture.

Press Vvolume button.

~soft picture.

–4–

QCOLOUR

nls Io*9nn -------

‘t BRIGHT

tmmaomnlnn------

❑

C) CONTRAST

slnnsooss-------

V.TON.

-.-.----+--,.----

(Remote Control Operation)

●Fine tuning

Press <> (Fine tuning) button.

Press Aor ~volume button. ❑

Note: Normally fine tuning is not required for this TV. However,

in some case (such as radio interference) picture may be-

come more clear by detuning from the best tuned fre-

quency.

In such case, you can use this fine tuning to eliminate

some interference beat pattern.

Sound adjustments

●TO adjust the sound volume:

Press A(up) or ~(down)

volume ~button.

n~SOUND

m#mflnmlmm-------

●Toadjust the bass, treble, balance and the depth of surround

effeet:

Select the control function by pressing AUDIO SELECT o

button.

.Each time AUDIO SELECT obutton is pressed, the con-

trol function changes as follows;

-j:

BASS

-------- +----l---

BASS

tEl

~TREBLE

-. .....- +--l -----

TREBLE -El

uBALANCE

-------- +--------

BALANCE

SOUND VOLUME SURROUND

LEVEL

Note: “SURROUND LEVEL’ will be skipped when the sur-

round effet is turned off.

Adjust the bass, treble, balance or the depth of surround ef-

fect by pressing Volume obutton.

@... SurroundON/OFF

To enjoy the surround effect, press the Surround ON/OFF@

button.

To cancel the effect, press this button again.

Surround OFF

STEREO

Surround ON

STEREO

~ww(

@... Stereo/Mono ~

●When receiving the stereo broadcast, is displayed.

If the sound of astereo broadcast is not clear due to interfer-

ence or poor reception, select the MONO position by press-

ing this button.

.In the AV mode, select either STEREO or MONO to match

the stereo or monaural condition of the audio signal coming

from an external source, e.g. aVCR, A. V. equipment, or

other component by pressing Stereo/Mono Switch.

@... BilingualA/B

When receiving the bilingual broadcast, ‘A~H’A) is die_

played.

You can select the main or sub language with this button.

MAIN (A)

In the AV mode, each time Bilingual AIB button is pressed, the

audio channel changes as follows:

LEFT (A)~RIGHT (B)

@.... Sound mute ~

Should you wish to mute the

sound (e.g. While talking on the

telephone), press this button once.

To switch the sound back on,

press it again.

@... Normalization+*+

Press this button to recall the pic-

ture and sound settings which

you stored using the Memory O

@button. ❑

NORMAL

.-- ++---

@.... ChannelScanning~J

Press Channel Scanning button @to search for aprogramme.

The channel positions are automatically scanned, and the chan-

nel scanning will stop at the position where it began. To stop at

the position you want, press this button again.

=+=-------------*D

b-m-m-b

–5–

(Remote Control Operation)

~.... Offtimer Q

After aset time has elapsed, the power of the TV receiver is

switched off automatically.

●Each time Off timer button @is pressed, the set time

changes as follows:

~~~

L-J”L14U

t30minutes 60 minutes

●

-120 -90

120 minutes 90 minutes

With the off timer being set and the chann~l .A!wmlayreset, the

srem’alning time is displawd by pressing the off timer button

ayalli.

When the button is pressed again within three secoria<-u?her

the button was first pressed in above manner, the time is set

to an upper time which is most close to the remaining time.

Just one minute before switching off, “-01” and program me

number you are watching are displayed on the screen.

The timer setting will be cancelled if the power is switched

@).... Recall ~/S

To display the on-screen indications, press this button.

The display disappears after five seconds.

L___l’

STEREO

wProgramme

number

Note: When this button is pressed for more than 2seconds,

The following is displayed and the unit enters SELF

DEMO mode. This mode is for use in storefront demon-

strations.

It has no effect on TV operation.

SELF DEMO. SELF DEMO. mode

kE-E!!l

●To cancel the SELF DEMO mode, press the Recall ~/S@

button once again.

●If the Memory O0button is pressed in the SELF DEMO

mode, the self-demonstration will begin. Youcan also cancel

the SELF DEMO mode midway through play by pressing the

Recall ~/S ~button.

–6–

VCR USE

Note: This remote control transmitter has been designed es-

pecially to be used in conjunction with selected SANYO

VCR’S.

Some SANYO VCR’s may have their own functions, so

please refer to the individual instruction booklet when

using this remote control with SANYO VCR’s to ensure

compatibility.

●For VCR use set the TVAfCR switch to “VCR” position.

REWIND/—

REVIEW

RECORD —

POWER ON/OFF BUTTON

Use to turn VCR power on and off.

PLAYBUITON

Use to playback the tape.

STOP BUITON

Use to stop the movement of the tape.

FAST/CUE

—TVIVCR SWITCH

—CHANNEL UP

—CHANNEL DOWN

—POWER ON/OFF

—PLAY

—FAST/CUE

—PAUSE/STILL

—STOP

Use to advance the tape at fast speed, or in order to playback

the tape at fast speed.

REWIND/REVIEW

Use to rewind the tape, or in order to playback the tape in

reverse at fast speed.

PAUSEKTILL

Useto temporarily stop (Pause) the tape when recording, or in

order to see a still image during playback.

CH UP DOWN A/~

Use to change the programming position for the VCR.

RECORD

Use to record on the tape. Press both of the RECORD buttons

at the same time.

Pre-Settinu Of Stations UPt032 broadcaststations inyo.rreception area can b,~tO~ed inthe electronic memOI-Y.

There are two ways of presetting as follows:

Automatic presetting –the basic way

All receivable channels are automatically tuned in and memo-

rized in consecutive program positions.

Note: Programme position 1to 29 can be automatically

preset. VCRI, VCR2 and VCR3 positions cannot be au-

tomatically preset.

Manual presetting

Use to preset areceivable channel in any desired program po-

sition, e.g. the position with the same number as the channel.

Automaticpresetting

1.Select any programme position from 1to 29.

(Automatic presetting is

VCR2, or VCR3 position.)

2. Press PRESET obutton.

$mp ,:“”,+ z8

BUD.,”0

not possible from the W%?,

AUTO

Program PRESET

position

Channel band

VL: low VHF band

VH: high VHF band

3. Press TUNING (+)@ button. U: UHF band

mQ4’

I\J

The channels are preset in consecutive postions beginning

from the program position “l”.

After all available channels (position 1to 29) have been

preset, the unit returns to the postion “l”.

Note: To cancel automatic presetting midway, press the

Recall D/S@ button.

IManual presetting]

1.Press PRESET obutton.

1r1

p+p,;“”,@p“i%o

2. Press PRESET@ button again.

$p-%%SUM MEW

3. Press the programme selector

~or ~to select the desired

programme position.

AUTO

PRESET

1VL

Mmm-------------

1VL

now------------

6VL

MmB-------------

4. Press 8AND selector @to select

the channel band.

p’ -?*”8

,5fT 7“.1.. a!4,.0

--.-.-.---.-.-.-

When BAND selector is pressed, the frequency will be set to

the lowest frequency in the set band.

.Channels band VL, VH and Uare for the following channel

groups. (Asia) (New Zealand)

VHF low band :E2– E4 1–3

VHF high band :E5 –E12 4–11

UHF band :21 – 69 21 – 69

(–) button until the desifed SPIC. , , ...’_

tion appe.w?-. ‘““

6VH

tmamEm----------

6’-%58

xFn,sE, ..,. .,”O .,.0 The number of upright segments

increases for ahigher-frequency

channel.

6. Press o(Memory) button e. 1-l

6VH

Bn#nmm----------

7. Repeat steps 3to 6for other desired channels.

8. Press PRESET @or ~/S

STEREO

(Recall) obutton. P4

This completes the presetting.

Memory- Copy This TV tuning system has

another advanced feature called

“memory copy”.

For example, if you wish to copy the TV channel in the

programme position “2” into the programme position “6”:

1. Select the programme position “2”.

2. Press PRESET@ button.

3. Press PRESET@ button once again.

4. Press “6” button of the programme selector ~.

5. Press O(Memory) button 0.

6. Press PRESET@ or Q/S (Recall) button e.

–7–

(Pre-Setiing of Stations)

IInsertingChannels

The following example shows how to insert Channel-D of

programme position “4” into programme position “2”.

TDeletingChannels I

The following example shows how to delete Channel-B from

programme position “2”.

Channel-A

Channel-D

Insert

(

Channel-B Channel-C Channel-D

-D 4

\Programme 1

hPosition I

IVCR3 I

,II

a-m----------’;

Select programme position “4” (Channel-D).

Press PRESET @button.

Press PRESET @button once again.

Press “2” button of the Programme Selector ~.

❑-m

Press and hold down the TVAIIDEO selector o, then press

the (+)Programme Selector o.

Press the PRESET ~or Recall ~/S ~button.

.Channel-D of programme position “4” is now inserted into

programme position “2”.

.In this example, the channels from Channel-B (programme

position “2”) onward will be shifted successively into the

next highest programme position.

-----

Channel-A ~Channel-D IChannel-B Channel-C

Ll+n:rrl-rl

I----- Chan~el-D

VCR3

IEl5

LHJJ-----------’

Note: You cannot insert achannel which would cause the

channel in programme position “29” to shift to ahigher

programme position. You also cannot insert channels

into the VCRI, VCR2, or VCR3 position. When the

Channel-A

r__ —-- -

IChannel-B ;

I21

‘-7--DELETE

Channel-C

El3

Programme

Position

Channel-D

-D 4

L-!!!4 I

b-m-----------

Select programme position “2” (Channel-B).

Press PRESET ~button.

Press PRESET @button once again.

2VL

lmn-------------

Press and hold down the TVIVIDEO selector e, then press

the (–)Programme Selector o.

Press PRESET @or ~/S (Recall) ~button.

●Channel-B of programme position “2” is now deleted.

●In this example, the channels from Channei-B

(programne position “2”) onward will be shifted Suc-

cessively into the next lowest programme position.

Channel-A Channel-C Channel-D

~~1

I1l–l 21–I 31----’,:

IVCR3 I

LII

h-m-----------

Note: Channel deletion is not possible in the VCRI, VCR2, or

VCR3 position.

When the above procedure is done, the position indica-

tor (VCRI, VCR2, or VCR3) will flash in red.

above procedure is done, the position indicators will

flash in red.

–8–

TELETEXTUSE ●Automatically adjust fordisplays in English, German, French, Swedish, ltalian and

Spanish in accordance with the television broadcast signals.

INDEX ~—

TIME/SUB @—

MODE —

STORE ~1 —

RED ~

Page Selection _

■Switching to the Teletext Mode OB~

Press the TV/MIXflEXT button, then the screen changes as

follows:

1I I I 1

SIZE ~

HOLD ~

TVIMIXITEXT (J @ @

PAGE UP A

PAGE DOWN ~

CYAN

YELLOW

GREEN

Back to TV programme.

PageSelection

DIRECTPAGEACCESS

Apage can be selected with the 0-9 buttons. For example, to display page 120 press buttons 1, 2and O. The selected

page number will appear on the screen.

UP-DOWN PAGE ACCESS

If apage is displayed on the screen and you want to read the following page, you can press the UP button instead of

selecting the page number. To bring back the previous page press the Down button. If you keep the UP or DOWN button

pressed the page numbers will run up or down until you release the button.

The page number will change as follows by pressing the UP-DOWN button.

(A) P200 –P201 –P202 –.............– F299 –P200 –P201

(~) P200 –P299 –P298 –.............– P201 –P200 –P299

Note: In the LIST mode, you can access the pages directly. (See page 12.)

–9–

Andere Handbücher für CAP3310TXN

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sanyo Fernseher Handbücher

Sanyo

Sanyo AVM-2120MA Bedienungsanleitung

Sanyo

Sanyo CP29ST3T Bedienungsanleitung

Sanyo

Sanyo C20VT11-M Bedienungsanleitung

Sanyo

Sanyo AVM-3660G Bedienungsanleitung

Sanyo

Sanyo DP19648 - 19" LCD TV Bedienungsanleitung

Sanyo

Sanyo C21PM86Z Bedienungsanleitung

Sanyo

Sanyo CPP2930TX Bedienungsanleitung

Sanyo

Sanyo 28dn2 Bedienungsanleitung

Sanyo

Sanyo DP42840 - 42" Diagonal LCD FULL HDTV 1080p Bedienungsanleitung

Sanyo

Sanyo CPP2930 Bedienungsanleitung

Sanyo

Sanyo CE21C6-C Bedienungsanleitung

Sanyo

Sanyo CE23LC4-C Bedienungsanleitung

Sanyo

Sanyo CE21DN6F-C Bedienungsanleitung

Sanyo

Sanyo DP42840 - 42" Diagonal LCD FULL HDTV 1080p Bedienungsanleitung

Sanyo

Sanyo CP29FS2 Bedienungsanleitung

Sanyo

Sanyo CP29ST2 Bedienungsanleitung

Sanyo

Sanyo LCE22FD40-B Bedienungsanleitung

Sanyo

Sanyo CP29EF1K Bedienungsanleitung

Sanyo

Sanyo DP37647 - 37" Vizzon LCD TV Bedienungsanleitung

Sanyo

Sanyo CE21D4-C Bedienungsanleitung

Sanyo

Sanyo CE14A2-C Bedienungsanleitung

Sanyo

Sanyo C29FS51 Bedienungsanleitung

Sanyo

Sanyo DS19204 Bedienungsanleitung

Sanyo

Sanyo LED-32XR10FH Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung