Sartorius M-prove Series Bedienungsanleitung
Operating Instructions | Betriebsanleitung | Mode d’emploi |
Istruzioni per l’uso | Manual de instrucciones
Sartorius M-prove
Electronic Precision Scales/Balances | Elektronische Präzisionswaagen |
Balances électroniques de précision | Bilance elettroniche di precisione |
Balanzas electrónicas de precisión
98648-018-37
English page 3
In cases involving questions of
interpretation, the German-language
version shall prevail.
Deutsch Seite 23
Im Auslegungsfall ist die
deutsche Sprache maßgeblich.
Français page 43
En cas de questions concernant
l’interprétation, la version
en langue allemande fera autorité.
Italiano pagina 63
In caso di interpretazione dubbia,
fa testo la versione in lingua tedesca.
Español página 83
En caso de interpretación,
la versión en lengua alemana
será determinante.
2
Warnings and Safety Precautions ... 3
Getting Started............. 4
Operation ................ 8
Basic Weighing Function ........ 8
Description of the Keys ......... 8
Application Programs
Toggling between Weight Units .... 10
Counting ................ 11
Weighing in Percent .......... 12
“Hold” Display.............. 13
Totalizing ................ 14
Specific Gravity ............. 15
Calibration/Span Adjustment ..... 16
Configuration (Setup Menu) ..... 17
Error Codes ............... 19
Recycling ................ 20
Accessories (Options).......... 21
Specifications.............. 22
EC Declaration of Conformity .... 103
Safety Information
§To prevent damage to the equipment,
please read these operating instruc-
tions carefully before using your
balance.
!Do not use this equipment in
hazardous areas.
!Make sure the voltage rating printed
on the power supply is identical to
your local line voltage.
!Use only commercially available 9 V
batteries. If desired, you can use a
rechargeable battery (not included).
– The balance is energized at all times
unless you disconnect the AC adapter
and, if connected, the battery.
– Protect the AC adapter from contact
with liquid
!Exposure to excessive electromagnetic
interference can cause the readout
value to change. Once the disturbance
has ceased, the instrument can be
used again in accordance with its
intended purpose.
Installation
– It is recommended to connect
Sartorius accessories and options,
as these are optimally designed for
use with your balance.
– Do not open the balance housing as
this may void the manufacturer’s
warranty.
3
Contents Warnings and
Safety Precautions
Equipment Supplied
– Balance with protective flip-down cover
– Weighing pan
– Plug-in AC adapter
Additional equipment with models AY612, AY412,
AY212, AY711, AY511:
– Calibration weight
Additional equipment with models AY303, AY123:
– Calibration weight
– Round glass draft shield
– Level indicator and adjustable feet
Storage
$Do not stack more than 3 balances on top of one
another at a time.
Installation
Choose a location that is not subject to the
following negative influences:
– Heat (heater or direct sunlight)
– Drafts from open windows and doors
– Extreme vibrations during weighing
– Excessive moisture
Setting Up the Balance
§Place the components on the balance in the
following order:
– Reversible round weighing pan
– Round glass draft shield on models AY303, AY123
!Do not use as an “in-use“ cover!
4
4
Getting Started
Connecting the Balance to AC Power
§It is recommended to use only the included AC
adapter for optimal performance and safety.
§Insert plug into the jack (located on back of balance)
§Plug the AC adapter into an electrical outlet
!LISTED power supply 11 V–21 V compliant with
NEC Class 2 output.
Below-Balance Weighing
A port for a below-balance weighing hanger is
located on the bottom of the balance.
§Open the cover plate on the bottom of the balance.
§Attach the sample (e.g., using a suspension wire)
to the hanger.
$Install a shield for protection against drafts if
necessary.
5
5
Installing the Battery
(not for models AY303, AY123)
$Batteries are not included with the equipment
supplied
!Use only commercially available 9 V batteries.
!If you use a rechargeable battery, recharge it with
an external battery charger.
§Lay the balance on its side
§Open the battery compartment:
remove the compartment cover
§Install the battery in the compartment
$Make sure the polarity is correct.
!Close the battery compartment:
slide the cover into position until it snaps into place
!Do not throw away used batteries with normal
household waste.
Rechargeable batteries contain toxic materials and
must be disposed of in accordance with local waste
disposal regulations.
6
Leveling the Balance
(only for models AY303, AY123)
§Always level the balance again any time after it has
been moved to a different location.
Example: moving bubble from R to L
§Turn the feet as shown in the diagram until the
air bubble is centered within the circle of the level
indicator.
> In most cases this will require several adjustment
steps.
Removing Weights
for Calibration/Span Adjustment
(only for models AY612, AY412, AY212, AY711,
AY511, AY303, AY123)
§Grasp the tab to turn and remove the weight
compartment.
$Follow instructions on page 16 for calibration/span
adjustment.
7
Operation
Basic Weighing Function
Features
– Zeroing the balance
You can zero the balance within the
entire weighing range, up to the maxi-
mum capacity.
Preparation
§Switch on the balance: press the e
key
§If necessary, zero the balance: press the
(Zero) key
$If necessary, change the configuration
settings:
see the chapter entitled “Configuration”
$If desired, load the factory settings:
see the chapter entitled “Configura-
tion,” menu item 9.– 1
Additional functions:
$Switching off the balance: press the
ekey
$Battery operation: automatic shut-off
after 2,5 or 10 minutes; see chapter on
configuration. Example: 2 minutes.
If the weight readout remains
unchanged and no keys are pressed for
at least two minutes, the battery symbol
“ “ starts flashing. After another
2 seconds, the balance shuts off auto-
matically, unless a key is pressed.
Description of the Keys
eswitches the balance on and off or
switches it to the standby mode.
Battery operation: on; turns
backlight on; off
(Zero) Zeros the balance; press and hold
2 seconds: opens the application
menu
(Cal) Starts calibration/adjustment
(F) Starts an application program;
Scrolling in application menu,
configration menu and calibra-
tion menu
(Enter) Confirms the selected setting;
Exits application, configuration &
calibration menu if key is pressed
and held for more than 2 seconds.
(Print) Generates a printout or data
output
88
Example: Determine weight of sample
Step Key (or instruction) Display
1. Switch on the balance e
Self-test runs
Display: Software version r 31.01
2. Open the flip-down cover and leave
open while weighing
3. Place container on the balance 52.0 g
(in this example, 52 g)
4. Zero the balance (Zero) 0.0 g
5. Place sample in container on balance 150.2 g
(in this example, 150,2 g).
99
Toggling between Weight Units
With this application program you can toggle the display of a weight value back and forth
between two weight units (see table below).
Example: Toggle weight unit from pounds [lb] (application) to grams [g] (basic unit)
Step Key (or instruction) Display
1. Select application program (Zero) > 2 sec
2. Select Toggling between Weight Units (F)
3. Confirm unit (Enter)
4. Select weight unit; in this example: (F) repeatedly
“5. Pound” (see table below)
5. Confirm weight unit (pounds) (Enter)
6. Place sample on balance
7. Toggle weight unit (F)
Menu code Unit Conversion factor Display
1. user* Grams 1.00000000000 o
2.grams (factory setting) Grams 1.00000000000 g
4.carat Carats 5.00000000000 o
5.Pound Pounds 0.00220462260 lb
6.ounce Ounces 0.03527396200 oz
7.tryo Troy ounces 0.03215074700 ozt
8.tl.hon Hong Kong taels 0.02671725000 tlk
9.tl.sin Singapore taels 0.02645544638 tl
10.tl.ta Taiwanese taels 0.02666666000 tl
11.grai Grains 15.4323583500 GN
12.peny Pennyweights 0.64301493100 dwt
15.tl.ch Chinese taels 0.02645547175 tl
22.pdoz lb/oz 0.03527396200 lb:oz
23.newt Newtons 0.00980665000 N
* User-defined conversion is customer selectable with RS-232 or USB program option.
1010
Application Programs
Inhaltsverzeichnis
Sprachen:
Andere Sartorius Skala Handbücher
Sartorius
Sartorius EVO1S Bedienungsanleitung
Sartorius
Sartorius Sartorius Basic plus Bedienungsanleitung
Sartorius
Sartorius Master Pro Series Bedienungsanleitung
Sartorius
Sartorius Entris BCE Series Bedienungsanleitung
Sartorius
Sartorius PMA.Power Series Bedienungsanleitung
Sartorius
Sartorius PMA.HD Bedienungsanleitung
Sartorius
Sartorius M3P Bedienungsanleitung
Sartorius
Sartorius PMA.Quality PMA7501-Y Bedienungsanleitung
Sartorius
Sartorius Cubis MCA Series Bedienungsanleitung
Sartorius
Sartorius G 150 D Bedienungsanleitung
Sartorius
Sartorius Cubis MCA10202S Series Bedienungsanleitung
Sartorius
Sartorius 1100 Benutzerhandbuch
Sartorius
Sartorius Element Series Bedienungsanleitung
Sartorius
Sartorius U 4100 Bedienungsanleitung
Sartorius
Sartorius Master series Bedienungsanleitung
Sartorius
Sartorius TopMix2.Touch TM02-X Bedienungsanleitung
Sartorius
Sartorius PMA7501-Y00G Bedienungsanleitung
Sartorius
Sartorius Signum 1 Bedienungsanleitung
Sartorius
Sartorius PMA.Vision Bedienungsanleitung
Sartorius
Sartorius CP64 Bedienungsanleitung
