中文 EN DE RU KO PT JA ES
98021/98022/98023/98024
10
VI、Operation Instructions:
Check the equipment for abnormalities before use, and stop using it immediately if any. The equipment can be only used if it is normal
after repairing, otherwise a major accident may be caused. Please check whether the wire, plug and other parts are with damage,
deformation, etc., otherwise people may be injured by electrical shock.
When using the winder, pull the wire with two hands slowly and evenly （with a force of about 3KG）to the appropriate length. Stop
pulling immediately when seeing the length warning mark, and lock it with the ratchet brake. Too high speed and excessive pulling force
may damage the product.
Avoid bending or stepping on the wire, and avoid contact with sharp objects during use.
Pull the plug out of the socket after use and wipe the wire clean.
When winding the wire, pull the wire out for 8-30cm slowly to unlock the ratchet, and then hold the wire by hand to wind it back slowly.
Note: It is strictly forbidden to allow the wire to be wound freely, so as to prevent injury to people and damage to equipment during quick
winding.
The reel comes with an internal overheat protector, which will automatically protect the wire and cut off the circuit if the temperature is
too high. Then the plug of the electric equipment must be pulled out from the reel. To recover its working status, you need to
press the red reset button on the surface cover of the wire reel.
VII、Daily Maintenance:
To ensure proper winding of wire, wipe the pipe with a cloth dampened with warm water to remove dirt from the surface.
Do not use cleaners or solvents that may damage the pipe.
Non-professionals shall not remove the wire reel as the internal coil spring may injure people or damage equipment.
VIII、Warranty:
For the material and process defects of the wire reel, the warranty for the whole machine is 12 months, which is calculated from the
date of purchase.
Damage caused by human factors or abnormal use is not covered under the warranty.
IX、Transportation:
Throwing, falling, flinging and treading are not allowed during loading and unloading. In the process of transportation, direct sunlight and
rain should be avoided, and contact and mixing with corrosive substances are not allowed.
X、Storage:
Storage temperature: -20 °C - 60 °C
Storage period: 6 months.
Storage conditions: The warehouse shall be well ventilated with direct sunlight and rain avoided, and do not contact with corrosive
substances.
