SATA 98104 Bedienungsanleitung

精巧型数显充气枪

Digital Tyre Infaltor

98104

使用说明书

中文 EN

98104 中文

产品特点：

- 高精度的胎压测量

- 高亮液晶屏幕背光

- 加厚充气橡胶管，不锈钢保护弹簧

- 防锈且耐用全铜接头

使用说明：

- 取下气门芯盖帽，连接充气夹头与气门芯，并确保不漏气

- 胎压检测：无须按动扳机，连接后即显示测量到的胎内压力

- 充气操作：握紧扳机，充气枪给轮胎充气

- 放气操作：半按扳机，轮胎通过充气枪放气

- 节能模式：充气枪停止使用后会在 8秒后自动关机

- 开机状态下长按按键两秒更换单位（BAR/PSI/KPA）

- 如需更换，请使用 AAA*2 电池

- 工作压力：0-12 Bar, 读数精度是 0.01Bar, 最大进气压力 15Bar

重要说明：

- 为了防止人身伤害，在使用过程中请不要将充气夹头对准身体任何部位，以免发生伤害

- 不要超过轮胎的最大压力；检查软管和夹头是否完好，无损坏或裂纹。使用压缩空气时，确保安全

的工作环境

- 油水滤棉应根据实际使用情况确定更换时间，建议每半年更换 1次

- 世达保留更改产品技术规格的权利，恕不另行通知 !

98104 中文

电池更换说明：

- 拧下电池盖

- 将电池放入充气枪，正极朝外

- 小心拧紧电池盖，不要过紧

98104 中文

油水滤棉更换说明：

- 用14mm 扳手旋下接头

- 取出滤棉并更换

98104 中文

图号世达编号零件名称使用数量

1 P98104-1 橡胶护套 1

2 P98104-2 电池堵盖 1

3 P98104-3 压铸铝壳体 1

4 P98104-4 透明盖 1

5 P98104-5 按键 1

6 P98104-6 线路板固定架 1

7 P98104-7 线路板组件 1

8 P98104-8 扳机开关 1

9 P98104-9 扳手阀组件 1

10 P98104-10 压铸铝主体 1

11 P98104-11 气管组件 1

12 P98104-12 电池固定架 1

13 P98103-4 电池 2

14 P98101-10 充气夹头 1

98104

中文

Product Features:

- High-precision tire pressure measurement

- High-brightness LCD backlight

- Thickened pneumatic rubber hose, stainless steel protective spring

- Rust-proof and durable copper connector

Operation Instructions:

- Remove the valve core cap, connect the inflation chuck to the valve core, and ensure no air leakage.

- Tire pressure detection: the measured in-tire pressure will be displayed once connected without the need to press the

trigger.

- Inflating operation: hold the trigger, and the inflator will inflate the tire.

- Deflating operation: Press the trigger halfway, and the tire will be deflated via the inflator.

- Energy-saving mode: the inflator will automatically shut down after 8 seconds not in use.

- Long press the button for two seconds to change units (BAR/PSI/KPA) under power-on state.

- Please change two AAA batteries if needed.

- Working Pressure 0-12 Bar, with the reading accuracy of 0.01Bar and maximum inlet pressure of 15Bar.

Important:

- To prevent personal injury, do not point the inflation chuck to any part of the body.

- Never exceed the maximum pressure of the tyre. Check that hose and chuck are in good condition with no damage or

cracks. Ensure safe working environment when using compressed air.

- Oil-water filter cotton should be changed based on actual usage. It is recommended to change every six months.

- SATA reserves the right to change the technical specifications of the product without prior notice.

98104

中文

Instruction for changing batteries:

- Unscrew the battery cap

- Slide the batteries into the inflator with the positive end facing out of the inflator

- Replace the battery cap carefully and do not over tighten

98104

中文

Schematic diagram for replacing the oil and water filter cotton:

- Unscrew the connector with a 14mm wrench.

- Remove the filter cotton and replace it.

Andere SATA Elektrowerkzeuge Handbücher

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch