Saunier Duval THEMACLASSIC 25 Bedienungsanleitung

Machine Translated by Google

F2 0,5

INSTRUCTIONS FOR USE

In this case restore the pressure by

opening the tap (t) positioned

under the boiler until the

value of 0.8 bar is read on the

display.

Choosing the operating MODE changes the

operating mode

NB : Briefly pressing one of the + or - keys (4) or (5) will cause the previously selected temperature value

to appear on the display.

6 - Operating indicator : - Flashing red :

fault signal.

Ignition of the boiler

1 - ON/OFF 2

- Display : •

pressure (bar) of the heating circuit • temperature (°C)

of the water when the boiler is in heating request. • fault

code 3 - Choice of operating mode.

4 and 5 - Hot water and

heating temperature adjustment.

mode

>> Attempt a reset: move the switch to stop the boiler

( O will appear ), wait 5 s then turn the boiler

back on ( I will appear ).

Filling the

system If there

is no water, the red light

(6) and the pressure

indication (2) flash.

Turning off the

• Move the switch to the left

to make O appear: the

boiler is not powered • Close

the gas tap in case

of prolonged absence.

Boiler protection against freezing

Heating + hot water

Heating temperature adjustment • Use

the + and - buttons

(5) to set the heating flow temperature

between 38°C and 87°C.

Move the switch to the right to make I appear.

bar

In the event of a fault, the

red warning light (6) will flash and

an F code followed by a digit

will flash on the display (2).

- Steady yellow : indicates burner ignition

of the boiler. The turning on of the green light indicates the selected mode:

• By pressing the key

water heater

Make sure that: • the

boiler is electrically powered

If the defect persists, contact the technical assistance

service.

Hot water only

• the gas tap is open

Domestic hot water adjustment • Use the + and -

buttons (4) to set the domestic hot water

temperature between 38°C and 65°C.

Machine Translated by Google

This room must be

permanently ventilated according

to the standards

currently in force.

Themaclassic

C boilers are natural

draft and open chamber

appliances; this means that the

air required for combustion

is taken directly

from the room where the

boiler is installed.

- Multiple installation

configurations according to the

characteristics of the

chosen room.

USER •

The guarantee

• The maintenance •

The adjustment

The NOx model is made with a

particular technology which

guarantees an

almost total reduction of the

nitrogen oxides (NOx) produced

by the combustion process. The

issue

These systems offer

numerous advantages including:

- Possibility of installation in small

rooms without the need for

ventilation of the room.

Accessories

For more information

on the accessories available,

consult your trusted dealer or

the website

www.saunierduval.it

Themaclassic F are watertight

fixtures; this means that both

the intake of the

combustion air and the

evacuation of the burnt gases can

be carried out with coaxial or

separate ducts.

INSTALLATION •

Dimensions 10 • Heating circuit

11 • DHW circuit 11 • Technical

features

Themaclassic C AS 25 E and

Themaclassic F AS 25 E Heating

only boilers with electronic ignition.

GENERAL

INFORMATION • Safety

Themaclassic C 25 E and

Themaclassic F 24 E NOx

Themaclassic F 25 E

Combination boilers (heating +

domestic hot water) with

adjustable output and

electronic ignition.

of polluting products, the

cause of phenomena such as

the greenhouse effect, is therefore

practically eliminated with the use

of low NOx emission boilers.

MAINTENANCE 32 - 35

THEMACLASSIC F 24 E NOx,

INSTALLATION AND USER MANUAL

THEMACLASSIC C AS 25 E, THEMACLASSIC F AS 25 E

THEMACLASSIC C 25 E, THEMACLASSIC F 25 E,

4 - 5

12 - 13 •

Hydraulic circuit 14 - 16 • Positioning

• Hydraulic connections

• Boiler installation •

Electrical

connections 24 - 25 •

Commissioning 26 - 27 •

Adjustments 28 - 30 • Emptying •

Gas change 31

19 - 21

3Presentation

Usage instructions

control

• Warnings

• Smoke kit

installation

Themaclassic C

37 - 42

burned gas

of the installation

7 • Questions and solutions 8 - 9

of the boiler •

Evacuation

Index

Presentation

of the boiler

Machine Translated by Google

Welcome

users

For the conditions, see the

last page of this booklet.

They will place their proven experience at your complete

disposal.

Free Initial Verification

Verification and first

power up are

completely free; We

therefore invite

you to call Saunier

Duval authorized service

centers to have these

operations carried out.

Vaillant Saunier Duval Italia SpA

Dear user, First of all, a warm thank you for choosing

a Saunier Duval wall-hung boiler. By giving your preference

to this brand, you now have one of the most advanced

devices of this category distributed on the European market.

The materials, the construction and the tests are perfectly in

line with the European and National Standards

regulating the matter. The powers, performances and

safety devices are guaranteed by tests carried out both on the

single components and on the finished appliances according

to the International Quality Control Standards. Finally, Saunier

Duval boilers are checked one by one before being packed

and shipped.

We invite you to carefully read the information

regarding commissioning, as well as the maintenance

instructions; in this way you will be able to avoid annoying

inconveniences and prevent breakdowns. Keep this booklet

carefully and consult it when you have any doubts

about operation and maintenance.

Documents

Together with this

booklet, we invite

you to keep a copy of

the declaration of conformity

issued by the installer

and a copy of the system

booklet.

Guarantee

The verification and

the free first ignition

carried out by an

authorized Saunier Duval

assistance

center allow you to

activate the Saunier

Duval conventional guarantee.

Do not hesitate to contact our Authorized Technical Assistance

Services for the appropriate periodic maintenance.

USER

Machine Translated by Google

Technical assistance centres

This operation, in addition to

optimizing the operation of the

appliance according to the

characteristics of the

system, is an indispensable

condition for the activation of the

Saunier Duval conventional

guarantee described further

on.

Free initial verification Once

installation has been

carried out by an

authorized person,

Saunier Duval offers the

initial verification free of charge

provided that it is carried out

by its authorized service

centre.

Saunier-Duval

The assistance centres

In compliance with the technical

standards and laws in force,

Saunier Duval recommends

that you contact your network

of authorized service centers

to have your appliance carried out

periodic maintenance at the end of

each heating season. In this way,

with a modest economic

investment, it will be possible to

contribute to a saving

in fuel consumption, the

probabilities of unforeseen

and annoying technical stops

during the heating season will be

reduced, and, in the last

analysis, the appliance will be

placed in a condition of extend its

operational life.

Therefore, in order to have a product

that is always efficient and

at maximum performance,

In the event of a lack of

conformity, the consumer has the

right to take action against

the seller to obtain the restoration,

free of charge, of the conformity

of the goods for a period of 24

months from the date of purchase.

The European Directive

99/44/EC, concerning certain

aspects of sales and guarantees

for consumer goods,

directly and exclusively

involves the sales

relationship between the seller

and the consumer.

Legal and

preventive maintenance

The technical regulations and the

laws in force prescribe the

obligation to contact a

qualified person pursuant to

law 46/90 for an annual inspection

of the appliance

and the analysis of the

combustion every two

years.

It is possible to contact the

nearest Saunier Duval authorized

technical assistance center by

consulting the Yellow Pages

under the heading gas

boilers or by consulting the website

www.saunierduval.it

read constantly updated

on Saunier Duval products,

on sector standards, both technical

and safety, and use original spare

parts.

Saunier Duval authorized

service centers are also

available to propose

scheduled maintenance

contracts adapted to

the needs of each individual

user, at particularly

advantageous conditions.

Routine cleaning and maintenance

operations are not covered by

the guarantee.

Vaillant Saunier Duval Italia Spa,

while not being the final seller

vis-à-vis the consumer, nevertheless

intends to support the installer's

responsibilities with its own

Conventional

Warranty, supplied through

its own technical

assistance organization (see

the terms of the

conventional warranty).

Saunier Duval are made up of

qualified professionals

according to current standards

Warranty

certificate

Machine Translated by Google

Maintenance:

what you need to know

Cleaned and well

adjusted, your

boiler will consume

less and last longer. an

annual maintenance

of the boiler, as well as

a legal obligation, is

essential for good functioning.

The stipulation of the

maintenance

contract with an authorized

assistance center allows

you to obtain

optimal functioning of the

boiler and to comply

with the provisions of the law on

the matter.

This makes it possible to

lengthen the life of the

appliance, reduce

consumption and harmful emissions.

The cleaning of the

external panels must

be done with a wet

rag and soapy water.

Do not use abrasive

or solvent-based products as

they could damage the

paneling.

USER

Machine Translated by Google

Heating temperature

adjustment: 2 -

The + and - keys

above allow the heating

circuit water temperature

to be varied from the

minimum (38°C) to the

maximum allowed.

NB : A short press

displays the previously

selected temperature.

NB : A short press

displays the previously

selected temperature.

Domestic hot water

temperature

adjustment (except

AS models): 1 - The

+ and - keys above allow

you to vary the domestic

hot water temperature from

38°C to 65°C in

order to obtain the optimum

temperature for your needs.

You will have to

resort to regulation if

your system lacks a room

thermostat or to regulate

the temperature of the

water inside the radiators.

Regulation:

source of economy

Machine Translated by Google

My boiler has

stopped, the red light and

the pressure indicator are

flashing!

After bleeding, check the

pressure and restore it if

necessary. If the anomaly

persists, contact the assistance

centre.

If the filling has to be

done too frequently, there

could be a leak in the system.

good evacuation of burnt gases :

this leads to the stagnation

of harmful gases.

There may be air in the pipes.

proceed to bleed the radiators

by opening the appropriate

cock.

The more water flow

drawn, the less hot the

water is. In this case, it is

necessary to reduce

the flow rate at the tap until

the desired temperature is

reached.

I hear the sound of water

inside the radiators.

The task of the room

thermostat is not to

operate the boiler

when the external conditions,

such as a sunny day,

allow the desired

temperature to be maintained

in the room.

Indeed, the water temperature

depends on the required

flow rate.

When I open the hot water

tap fully it seems to me that

the water is less hot !

Since I installed the room

thermostat, the radiators

sometimes stay cold

for a long time.

The obstruction would prevent

The arrival of hot water

depends on the quantity

of cold water contained in the

pipes. If the bathroom

is 10 meters from your

boiler, the seconds needed for

the heat to arrive will

seem endless...!

It is essential for the

operation of your boiler.

Before the hot water

reaches the bathroom

I have to wait a long time !

ABSOLUTELY NOT!

It is extremely dangerous!

It is therefore

necessary to restore the

pressure by opening

the appropriate blue tap

located under the boiler

until the pressure of 0.8

bar is read on the display.

The boiler has stopped because

it has detected a lack

of water in the system.

I would like to close the

ventilation opening

where the boiler is

installed because cold

air enters. I can do it?

In this case consult your

installer.

USER

0,5

Your

questions…

bar

Machine Translated by Google

I have to be away

for a few days. How can I check the

heating circuit pressure

when the temperature

appears on the

display?

In homes that are

not occupied for long

periods, evaluate

the possible emptying of

the system, or better, insert

a specific antifreeze liquid

available from your installer.

When the boiler is in

heating request, the

water temperature

actually appears on the

display. To verify

Can frost damage my

system?

the pressure, it is sufficient

to put the boiler on the

hot water only position ( )

in order to

interrupt the heating

request and the pressure

can be read on the

display. Then put it

back in the heating

position.

In case of absence

for a few days,

simply lower the setting

temperature

on your room thermostat.

Note that a programmable

room thermostat will allow

you to ideally select the

days, time slots and

temperatures of the

heating.

Choose a temperature that

will allow you to

quickly find a comfortable

temperature on

your return.

If your installation does

not have a room

thermostat, select the

minimum temperature

in heating and set

it on the display of your

boiler.

Machine Translated by Google

C 25 E C AS 25 E F 25 E/F 24 E NOx F AS 25 E

3431

Themaclassic

Net weight

(kg)

Gross weight

184

INSTALLATION

740

410

Dimensions

310

Machine Translated by Google

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Saunier Duval Kessel Handbücher

Saunier Duval

Saunier Duval Ecosy 2 SB 28E Betriebsanleitung

Saunier Duval

Saunier Duval IsoTwin Condens T 26-CS/1 Bedienungsanleitung

Saunier Duval

Saunier Duval Themaclassic F30E PLUS Betriebsanleitung

Saunier Duval

Saunier Duval ISOTWIN CONDENS F 35 E Benutzerhandbuch

Saunier Duval

Saunier Duval THEMA C 23 Benutzerhandbuch

Saunier Duval

Saunier Duval SD 30e Betriebsanleitung

Saunier Duval

Saunier Duval ECOSY 24 E Bedienungsanleitung

Saunier Duval

Saunier Duval SYLVA FF 24 E Bedienungsanleitung

Saunier Duval

Saunier Duval Thelia 30 E Bedienungsanleitung

Saunier Duval

Saunier Duval ThemaClassicPlus F 24 E Bedienungsanleitung

Saunier Duval

Saunier Duval RED-5 Bedienungsanleitung

Saunier Duval

Saunier Duval THEMA C Bedienungsanleitung

Saunier Duval

Saunier Duval Xeon 30ff Betriebsanleitung

Saunier Duval

Saunier Duval Xeon 80ff Betriebsanleitung

Saunier Duval

Saunier Duval Thema CONDENS F 18 E SB Betriebsanleitung

Saunier Duval

Saunier Duval Ecosy 2 28E Betriebsanleitung

Saunier Duval

Saunier Duval SB30e Betriebsanleitung

Saunier Duval

Saunier Duval Combitek F 23 E Benutzerhandbuch

Saunier Duval

Saunier Duval SYLVA FF 24 E Benutzerhandbuch

Saunier Duval

Saunier Duval THELIA 623 Bedienungsanleitung

Saunier Duval

Saunier Duval ThemaPLUS CONDENS F 30 E Betriebsanleitung

Saunier Duval

Saunier Duval ISOFAST F 28 E Bedienungsanleitung

Saunier Duval

Saunier Duval 47-920-36 Betriebsanleitung

Saunier Duval

Saunier Duval ISOMAX F 28 E Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung