Savin 2555 Bedienungsanleitung
Savin 2555
Operating Instructions
COPY REFERENCE
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
305
6. User Tools (Copy/
Document Server Features)
Accessing the User Tools (Copy/
Document Server Features)
This section is for the key operators in charge of this machine. You can change
or set the machine's default settings.
Preparation
After using the User Tools, be sure to exit from the User Tools.
The selected key is highlighted.
Any changes you make with the User Tools remain in effect even if the main
power switch or operation switch is turned off, or the {
Clear Modes/Energy Sav-
er
}key is pressed.
Reference
For details, see “Accessing the User Tools (System Settings)” in the System
Settings manual.
APress the {
User Tools/Counter
}key.
The User Tools Main Menu appears.
BPress the [
Copy/Document Server Features
]key.
The Copy/Document Server Features menu appears.
TSPS040N
Screen
Contrast User Tools/
Counter
User Tools (Copy/Document Server Features)
306
6
CSelect the desired menu and press the key.
Note
❒[T
Next
]: Press to go to the next page.
❒[U
Prev.
]: Press to go back to the previous page.
Reference
⇒P.308 “User Tools Menu (Copy/Document Server Features)”.
DChange the settings by following the instructions on the display panel.
Then press the [
OK
]key.
Reference
⇒P.310 “Settings You Can Change with the User Tools”.
Note
❒[
OK
]: Press to set the new settings and return to the previous menu.
❒[
Cancel
]: Press to return to the previous menu without changing any data.
Exiting From the User Tools
AAfter changing the User Tools settings, press the [
Exit
]key on the User
Tools Main Menu.
Changing the User Tools is completed, and the machine is ready for copying.
Note
❒To exit from the change of the machine's default settings and return to
Copy mode, press the {
User Tools/Counter
}key.
❒You can also exit from the User Tools by pressing the {
User Tools/Counter
}
key.
Accessing the User Tools (Copy/Document Server Features)
307
6
This page is intentionally blank.
User Tools (Copy/Document Server Features)
308
6
User Tools Menu (Copy/Document Server Features)
General Features
Reproduction Ratio
Next Key
Prev. Key Next Key
Prev. Key Next Key
Page Format
Next Key
Date Dtamp
Page Numbering
Prev. Key
Prev. Key
Prev. Key
User Tools Menu (Copy/Document Server Features)
309
6
ZBQS130E
Next Key
Count Manager
Input / Output
Stamp Setting
Background Numbering
Preset Stamp
User Stamp
Next Key
Next Key
Prev. Key
Prev. Key
Prev. Key
User Tools (Copy/Document Server Features)
310
6
Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, see ⇒P.305 “Accessing the User Tools (Copy/
Document Server Features)”.
General Features
1
/
3
Menu Description
Auto Paper Select
Priority As a default setting, Auto Paper Select is selected. You can can-
cel this setting.
Note
❒Default: Yes
Auto Paper Select
Tray Display You can choose whether the available paper trays/sizes are
shown on the initial display.
Note
❒Default: Display
❒If you choose “Hide”, the display is shown as below. When
the [
Auto Paper Select
]key is pressed, paper sizes appear on
the display.
Auto Image Density
Priority As a default setting, Auto Image Density is selected. You can
change this setting.
Note
❒Default: Yes
Original Mode Pri-
ority As a default setting, Text is selected as the Originals Type. You
can change it to Text·Photo, Photo, Pale, or Generation.
Note
❒Default: Text
Settings You Can Change with the User Tools
311
6
Original Mode Dis-
play You can choose whether the original modes are shown on the
initial display.
Note
❒Default: No
❒If you choose “Yes”, the display is shown as below.
Original Mode Quality Level
You can adjust the quality level of copies for each of the original types (Text, Text·Pho-
to, Photo, Pale, Generation).
Text Adjust the sharpness of text.
Note
❒Default: Normal
❒[
SP Mode Changed
]is the value set during service setup.
❒Choosing [
Sharp
]or [
Soft
]affects the outline sharpness of
text.
Text·Photo When there are photo(s) and text on the original, determine
whether the photo or text takes priority.
Note
❒Default: Normal
❒[
SP Mode Changed
]is the value set during service setup.
❒[
Normal
]achieves a good balance between text and photos.
Menu Description
User Tools (Copy/Document Server Features)
312
6
Photo For a photo original, adjust the finish quality level to match the
type of photo original.
Note
❒Default: Screened Printed
❒[
SP Mode Changed
]is the value set during service setup.
❒Select [
Screened Printed
]for printed photo originals, and [
Con-
tinuous Tone
]for printed photo originals with fine dots.
❒Select [
Normal
]for printed photo and text originals.
Pale Adjust the quality level for the finish of a pale original with nor-
mal density.
Note
❒Default: Normal
❒[
SP Mode Changed
]is the value set during service setup.
Generation Adjust the quality level so as not to thicken the lines of the finish
image.
Note
❒Default: Normal
❒[
SP Mode Changed
]is the value set during service setup.
Original Image
Density Level You can select one of seven original image density levels for
each of the original types (Text, Text·Photo, Photo, Pale, Gener-
ation).
Note
❒Default: Normal
Auto Reset Timer The machine returns to its initial condition automatically after
your job is finished. The time can be set from 10 to 999 seconds,
or 0.
Note
❒Default: 60sec.
❒To turn “Auto Reset Timer” off, input “0”.
❒Note that when “Auto Reset Timer” is turned off, the ma-
chine will not return to the user code input window auto-
matically.
Menu Description
Settings You Can Change with the User Tools
313
6
General Features
2
/
3
Menu Description
Duplex Mode Prior-
ity You can select the type of the Duplex function effective when
the machine is turned on, Energy Saver mode is off, or Auto Re-
set is on.
Note
❒Default:
• Metric version: 1 Sided
→
1 Sided
• Inch version: 1 Sided
→
2 Sided
Copy Orientation in
Duplex Mode You can set the copy orientation when making two-sided cop-
ies.
Note
❒Default: Top to Top
Original Orienta-
tion in Duplex
Mode
You can set the original orientation when making two-sided
copies.
Note
❒Default: Top to Top
Initial Mode You can select the initial mode or Program No. 10 as the mode
effective when the machine is turned on, or modes are cleared.
Note
❒Default: Normal
Maximum Copy
Quantity The maximum copy quantity can be set between 1 and 999.
Note
❒Default: 999Cop.
Original Beeper The beeper (key tone) sounds when you forgot to remove orig-
inals after copying.
Note
❒Default: On
❒If the “Operation Panel Beeper” of the User Tools (System
Settings) setting is “Off”, the beeper does not sound irrespec-
tive of the “Original Beeper” setting. See “Operation Panel
Beeper” in the System Settings manual.
Andere Handbücher für 2555
4
Inhaltsverzeichnis
Andere Savin Multifunktionsdrucker Handbücher
Savin
Savin 816 Bedienungsanleitung
Savin
Savin 9040b Bedienungsanleitung
Savin
Savin 1515 Bedienungsanleitung
Savin
Savin 2018 Bedienungsanleitung
Savin
Savin 2555 Bedienungsanleitung
Savin
Savin SDC103 Bedienungsanleitung
Savin
Savin 2513 Bedienungsanleitung
Savin
Savin SP 311SFNw Bedienungsanleitung
Savin
Savin 4035e Bedienungsanleitung
Savin
Savin 9922 Bedienungsanleitung
Savin
Savin SDC306 Bedienungsanleitung
Savin
Savin 4800WD Bedienungsanleitung
Savin
Savin 2027 Service-Handbuch
Savin
Savin 2555 Bedienungsanleitung
Savin
Savin Pro 906EX Bedienungsanleitung
Savin
Savin 3655 Bedienungsanleitung
Savin
Savin 3355 Bedienungsanleitung
Savin
Savin 3699 Gebrauchs- und Pflegehandbuch
Savin
Savin 2035DP Bedienungsanleitung
Savin
Savin 9935D Bedienungsanleitung
Beliebte Multifunktionsdrucker Handbücher anderer Marken
Triumph Adler
Triumph Adler DC 2016 Handbuch
Epson
Epson WorkForce WF-2510 Benutzerhandbuch
Epson
Epson Stylus Scan 2000 Installations- und Betriebshandbuch
Epson
Epson PictureMate Snap PM 240 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C35 Bedienungsanleitung
Brother
Brother MFC-J430w Bedienungsanleitung
