SCA SCADVR18 Einrichtungshandbuch
FULL HD 1080P
DASH CAM
Value you can trust
Owners/Instruction Manual
PLU 557209
2
FHD 1920 x 1080P @ 30FPS
120 Degree wide viewing angle
Time and date stamp
2.0” Screen
G-Sensor function
Mini USB interface
Seamless cycle loop recording
Suction cup car mount
Built-in MIC and Speaker
12Vin-car USB charger
Supports Micro SD cards up to 64GB, card not included
Thank you for purchasing the SCADVR18 FULL HD 1080P
Dash Cam. This Dash Cam is specifically designed for real
time video and audio recording when driving.The Dash
Cam simply mounts to the windscreen and records footage
onto a Micro SD memory card.It has a G-sensor with
adjustable sensitivity and loop recording functionality.
Product overview
Product features
ATTENTION: Please charge the unit for 4 hours before installing.
The Dash Cam must be connected to power when in use, battery is
for emergency power only.
3
Table of contents
Product overview.................................................................2
Product features..................................................................2
Table of contents.................................................................3
Package components.........................................................4
Product structure.................................................................5
Charging the Dash Cam......................................................7
Installing the Dash Cam......................................................7
Instructions for video operation..........................................9
Instructions for Photo operation........................................10
Video/Photo playback & protecting file.............................11
Dash Cam menu...............................................................12
Movie mode menu settings...............................................12
General settings................................................................13
Still capture menu settings................................................15
Connecting to a PC...........................................................15
Maintenance.....................................................................16
Product specifications.......................................................17
Warranty...........................................................................18
SCADVR18
Suction mount bracket
Car charger
USB cable
Package components
4
!
5
Product structure
1) Power button
2) Micro SD card slot
3) Reset button
4) Mini USB connection
5) Indicator light
6) Screen
15) Locking nut
16) Suction lock
17) Suction mount
!
7) OK button
8) Down button
9) Up button
10) Menu button
11) Microphone
12) Lens
13) Speaker
6
Product structure cont...
Suggested
7
Installing the Dash Cam
The Dash Cam can be charged multiple ways:
1. Using the provided car charger. 2. Using a USB cable
to connect to the Mini USB interface.
When the Dash Cam is charging, a red indicator on the
Dash Cam glows red. The Dash Cam takes about 2
hours to fully charge. When the Dash Cam hits full
charge, the red indicator will turn off.
Charging the Dash Cam
1. Ensure windscreen is clean and free of debris. Attach
suction cup to the windscreen and lock into position with
the lever.
2. Fix where the vision is not blocked (Place close to
rear-view mirror is recommended). Don't install device on
an airbag or within its working range.
3. Insert Micro SD card into the Dash Cam
4. Insert Mini USB end of the power cord into the Mini
USB interface/ charging point of the Dash Cam. Connect
USB charging end of the cable into USB socket adapter,
place adapter into 12V power socket of vehicle.
5. Adjust the mounting bracket and rotate the camera
direction to get the best view. Ensure of the vehicles
bonnet is visible from the bottom of the screen
for alignment.
6. Turn vehicles ignition to ON, and the Dash Cam will
power ON and start recording automatically, you will hear
an audible tone once powered.
7. A blue LED will start flashing when recording has
started. When the blue LED is solid the Dash Cam is in
standby mode.
8. For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned
off the Dash Cam will save the current file and turn off.
8
Installing the Dash Cam cont...
9
Once the power source is connected and the ignition is
turned on, the red indication lamp will light up and it will start
recording automatically. Once ignition is turned off it will save
the last file and power OFF. To power ON/OFF manually
press the power button underneath. When not recording
press the Power button to switch to video mode. To start and
stop recording in video mode press the OK button. The red
circle indicator on the top middle of the LCD starts flashing.
Press UP arrow to mute the mic. When recording press the
Power button to lock files (SOS). Note do not turn off until
finished recording & lock icon disappears.
Instructions for video operation
Recording
Icon
Video
Resolution
Video Mode
SD Card
Exposure
Compensation
Battery
Strength
Microphone ON
Date/Time Recording Time
Lock Icon
10
Press the Power button to switch from video mode to photo
mode when not recording. The screen will change from a
movie icon to camera icon. To take a picture press the OK
button. The Dash Cam make a camera sound when a
picture is taken. Use the arrow keys to Zoom in and out.
Pressing the Menu button in photo mode will allow you to
adjust the photo resolution, image quality and other photo
settings.
Instructions for Photo operation
Photo
Resolution Photo Mode
Exposure
Compensation
number of
photos
remaining
Date/Time
Zoom
Inhaltsverzeichnis
Andere SCA Dashcam Handbücher
