Scalys GrapeBoard Bedienungsanleitung
1
GrapeBoard
User Manual
www.scalys.com
Overview
GrapeBoard
™
is a credit-card sized Secure Networking Communication Device, used in sen-
sor gateways, communication hubs and secure edge devices. GrapeBoard
™
is based on the
NXP® LS1012A, a 64-bit ARM® v8 network processor with network packet acceleration.
GrapeBoard
™
contains a single ARM
®
Cortex-A53 based processor running up to 1 GHz, a
hardware packet forwarding engine and high-speed interfaces. Also, the module incorporates
the same Trust Architecture and software compatibility of higher-tier QorIQ
™
Layerscape based
modules, enabling scalable, secure applications that leverage a common 64-bit ARM
®
v8 based
software.
Rich industrial interfaces
The GrapeBoard
™
provides an excellent base for high-performance, reliable, secure and efficient
networking with interfaces such as:
• 2x 1 GbE
• M.2 connector (supports single lane PCI or, SATA and USB 3.0)
• 2x USB 3.0/2.0
• 2.4 GHz Wi-Fi/BLE 4.0
• 1x I2C, anti-tamper
The GrapeBoard™ Industrial grade version will also be supported for long-term availability.
Scalable Performance
The product is based on the Raspberry PI
™
3+ formfactor and is compatible with a broad range
of standard RaspberryPI
™
3+ add-on boards (Hats) available on the market today. The comfort,
quality and design safety of a standard board solution is combined with the flexibility of a full
system design. You can realize this full system design by adding an application specific shields
or arrange an optimized custom design by Scalys.
ESD
Please be informed that your GrapeBoard
™
is a sophisticated piece of
sensitive micro-electronics. Electronic circuits are sensitive to electro static
discharge (
ESD
). Make sure to take ESD protective measures when the
GrapeBoard is not in a suitable enclosure.
Rev Date Description
1.0 17th Mai, 2018 First published version
Copyright © 2018, Scalys BV Public 2
www.scalys.com
User Manual
May 17, 2018
Contents
List of Tables 4
1 GrapeBoard™ features 5
1.1 Block diagram ........................................ 5
1.2 Feature List ......................................... 6
1.2.1 Main board components .............................. 6
1.2.2 Interfaces ...................................... 6
2 Board overview 7
2.1 Mechanical drawing .................................... 7
2.2 Mounting holes ....................................... 7
2.3 Connectors .......................................... 9
2.3.1 Buttons and LEDs ................................. 11
3 Electrical Specification 12
3.1 Supply voltage ........................................ 12
3.2 Power specification ..................................... 12
3.3 Temperature specification ................................. 12
4 Interfaces 13
4.1 SERDES options ....................................... 13
4.2 I2C.............................................. 13
4.2.1 Raspberry PI™ connector ............................. 14
4.2.2 JTAG ......................................... 14
4.2.3 WiFi/ Bluetooth ................................... 15
4.2.4 Tamper ........................................ 16
4.2.5 Boot device ..................................... 16
4.2.6 Boundary scan ................................... 16
4.2.7 Ethernet ....................................... 16
4.2.8 USB2.0-B micro ................................... 17
4.2.9 PWR_IN connector ................................. 17
4.2.10 PWR for industrial use ............................... 17
4.2.11 SDHC ........................................ 17
4.2.12 USB 3.0 ........................................ 17
4.2.13 M.2 Socket ...................................... 18
4.2.14 Board reset ...................................... 18
4.2.15 Push button for recovery boot operation .................... 19
5 Board Support Package 20
A References 21
B List of Acronyms 22
Copyright © 2018, Scalys BV Public 3
List of Tables www.scalys.com
List of Tables
2.1 Signal group ........................................... 10
2.2 buttons and LEDs ........................................ 11
4.1 SERDES configuration ..................................... 13
4.2 Raspberry PI™ connector ................................... 15
4.3 M.2 supported cards ...................................... 19
4.4 M.2 configuration pins ..................................... 19
Copyright © 2018, Scalys BV Public 4
www.scalys.com
User Manual
May 17, 2018
1
GrapeBoard™ features
1.1 Block diagram
The block diagram of the GrapeBoard™ is depicted in Figure 1.1.
Figure 1.1: Block Diagram
Copyright © 2018, Scalys BV Public 5
Chapter 1. GrapeBoard™ features www.scalys.com
1.2 Feature List
1.2.1 Main board components
The module contains the following on board main components:
- NXP® QorIQ LS1012A Processor
- Flash 512Mb and 8Mb recovery
- DDR3L 8Gb
- USB hub
1.2.2 Interfaces
The module contains the following interfaces:
- 5-15VDC pluggable power supply connectors
- Dual IEEE 802.3 1000BASE-T Gigabit Ethernet ports
- Dual USB 3.0-Compliant DS ports
- USB serial console interface
- M.2 "B-key 2242" interface connector
- eSDHC card slot
- 26-pin add-on board connector
- SMA antenna connector for WiFi/BT
- Push button for recovery boot operation
- Tamper detect input
- Reset button
- JTAG DAP connector
Copyright © 2018, Scalys BV Public 6
www.scalys.com
User Manual
May 17, 2018
2
Board overview
This chapter describes the mechanical specifications and positions of mounting holes, connectors,
headers, jumpers, buttons and LEDs available on the GrapeBoard
™
. Pin descriptions for headers
can be found in chapter 4.
2.1 Mechanical drawing
The mechanical dimensions are shown in Figure 2.1. All dimensions are in mm.
Figure 2.1: Mechanical Dimensions
2.2 Mounting holes
The positioning of the mounting holes is depicted in Figure 2.2. The non lated mounting holes
have a diameter of 2.9mm ±0.1mm.
Copyright © 2018, Scalys BV Public 7
Chapter 2. Board overview www.scalys.com
Figure 2.2: Overview of mounting holes position on top
Copyright © 2018, Scalys BV Public 8
Chapter 2. Board overview www.scalys.com
2.3 Connectors
The positioning of the connectors is depicted in Figure 2.3 and Figure 2.4. The pin 1 is marked
with a dot in the silkscreen for connectors 1 and 2, which is depicted with a red dot near the
connectors in Figure 2.3.
Figure 2.3: Overview of connector positioning on top
Figure 2.4: Overview of connector positioning on bottom
Copyright © 2018, Scalys BV Public 9
Chapter 2. Board overview www.scalys.com
Table 2.1: Signal group
Number Connector
1 Raspberry PI™ expansion
2 JTAG
3 SMA connector for WiFi/BT antenna
4 Tamper
5 Boot device select
6 Boundary scan
7 Ethernet 1
8 Ethernet 0
9 Serial console
10 PWR IN
11 PWR IN for industrial use
12 SDHC
13 USB3.0-A
14 M.2
Copyright © 2018, Scalys BV Public 10
Inhaltsverzeichnis
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
