Scandomestic K 62 Technisches Datenblatt

Ceramic Hob

Instruction Manual / Installation Manual

MODEL: K 62

Congratulations on the purchase of your new Ceramic Hob.

We recommend that you spend some time to read this Instruction / Installation

Manual in order to fully understand how to install correctly and operate it.

For installation, please read the installation section.

Read all the safety instructions carefully before use and keep this Instruction /

Installation Manual for future reference.

Product Overview

Top View

1. max. 1200 W zone

1 4 2. max. 1800 W zone

3. max. 1200 W zone

5 4. max. 1000/2200 W zone

2 3 5. Glass plate

6. Control panel

Control Panel

1. ON/OFF control

2. Power regulating controls

3. Keylock control

4. Timer regulating controls

5. Dual zone control

Product Information

The microcomputer ceramic cooker hob can meet different kinds of cuisine

demands because of resistance wire heating, micro-computerized control and

multi-power selection, really the optimal choice for modern families.

The ceramic cooker hob centers on customers and adopts personalized design.

The hob has safe and reliable performances, making your life comfortable and

enabling to fully enjoy the pleasure from life.

Before using your New Ceramic Hob

•

Read this guide, taking special note of the ‘Safety Warnings’section.

•

Remove any protective film that may still be on your ceramic hob.

Using the Touch Controls

•

The controls respond to touch, so you don’t need to apply anypressure.

•

Use the ball of your finger, not its tip.

•

You will hear a beep each time a touch is registered.

•

Make sure the controls are always clean, dry, and that there is no object (e.g. a

utensil or a cloth) covering them. Even a thin film of water may make the

controls difficult to operate.

Choosing the right Cookware

Do not use cookware with jagged edges or a curved base.

Make sure that the base of your pan is smooth, sits flat against the glass, and is

the same size as the cooking zone. Always centre your pan on the cooking zone.

Always lift pans off the ceramic hob –do not slide, or they may scratch the glass.

Using your Ceramic Hob

To start cooking

•

After power on, the buzzer beeps once, all the indicators light up for 1 second

then go out, indicating that the ceramic hob has entered the state of standby

mode.

Touch the ON/OFF control. all the indicators

show “-“

Place a suitable pan on the cooking zone that

you wish to use.

•

Make sure the bottom of the pan and the surface

Of the cooking zone are clean and dry.

Select a heat setting by touching the “-“ or

“+” control.

•

If you don’t choose a heat setting within 1

minute, the ceramic hob will automatically

switch off. You will need to start again at

step 1.

•

You can modify the heat setting at any time

during cooking.

•

By holding down either of these buttons, the

value will adjust up or down.

When you have finished cooking

Turn the cooking zone off by scrolling down to “ 0 “ or touching “-“ and

”+” control together.

Turn the whole cooktop off by touching

the ON/OFF control.

Beware of hot surfaces

“H” will show which cooking zone is hot to touch. It will disappear when the

surface has cooled down to a safe temperature. It can also be used as an energy

saving function if you want to heat further pans, use the hotplate that is still hot.

Locking the Controls

•

You can lock the controls to prevent unintended use (for example children

accidentally turning the cooking zones on).

•

When the controls are locked, all the controls except the ON/OFF control are

disabled.

To lock the controls

Touch the keylock control. The timer indicator will show “ Lo “

To unlock the controls

Make sure the ceramic hob is turned on.

Touch and hold the keylock control for a while.

You can now start using your ceramic hob.

When the hob is in the lock mode, all the controls are disable except the

ON/OFF, you can always turn the ceramic hob off with the ON/OFF

control in an emergency, but you shall unlock the hob first in the next

operation

Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic

hob. When an excessive temperature is monitored, the ceramic hob will stop

operation automatically.

Residual Heat Warning

When the hob has been operating for some time, there will be some residual

heat. The letter “ H ”appears to warn you to keep away from it.

Auto Shutdown

Another safety feature of the hob is auto shut down. This occurs whenever you

forget to switch off a cooking zone. The default shutdown times are shown in

the table below:

Using the Timer

You can use the timer in two different ways:

•

You can use it as a minute minder. In this case, the timer will not turn any

cooking zone off when the set time is up.

•

You can set it to turn one cooking zone off or more than one after the set time is

up.

•

You can set the timer for up to 99 minutes.

Using the Timer as a Minute Minder

If you are not selecting any cooking zone

Make sure the cooktop is turned on.

Note: you can use the minute minder even if you’re not selecting any cooking

zones.

Power level

Default working timer (hour)

Adjust the timer setting by touch the “-“ or “+”

controls. The minute minder indicator will start

flashing and will show in the timer display.

Hint: Touch the “-“ or “+” control of the timer

once to decrease or increase by 1 minute.

Touch and hold the “-“ or ”+” control of the timer to decrease or

increase by 10 minutes.

If the setting time exceeds 99 minutes, the timer will automatically

return to 0 minute.

Touching the”-“ and “+” together, the timer is cancelled, and the”--“will

show in the minute display.

When the time is set, it will begin to count down

immediately. The display will show the remaining

time and the timer indicator will flash for 5 seconds.

Buzzer will beep for 30 seconds and the timer indicator

shows “- - “ when the setting time finished.

Setting the timer to turn one cooking zone off

1. Touch the - or + of the corresponding cooking

zone you want to set the timer for.

Set the time by touching the control of the timer

Hint: Touch the “-“ or “+” control of the timer

once will decrease or increase by 1 minute.

Touch and hold the “-“ or “+” control of

the timer will decrease or increase by 10

minutes.

If the setting time exceeds 99 minutes, the timer

will automatically return to 0 minute.

Touching the “-”and “+” together, the timer is cancelled, and the will show “--”

in the minute display.

When the time is set, it will begin to count

down immediately. The display will show the

remaining time and the timer indicator flash

for 5 seconds.

NOTE: The red dot next to power level indicator

will illuminate indicating that zone is selected.

Using the Dual zone function

•The function only work in 4# cooking zone

•

The dual cooking zone has two cooking areas that you can use a central section and

an outer section. You can use the central section (A) independently or both

sections (B) at once.

Activate the Dual zone

1.Select a heat setting by touching the “-”or “+”control.

2.Adjust the heating setting between power levels 1 and 9

(e.g. 6)

3.Central section of the dual cooking zone will switch on.

4.Touching the dual zone control “◎” , you can activate

the outer section as well.

5.A neon above the dual cooking zone control will light

6.The cooking zone indicator show “P”and “”

alternately.

Deactivate the Dual zone

1.Touching dual zone control “◎” again, the dual zone

function is deactivated.

2.The cooking zone indicator show

“

”

Cooking Guidelines

Cooking Tips

•

When food comes to the boil, reduce the power setting.

•

Using a lid will reduce cooking times and save energy by retaining the heat.

•

Minimise the amount of liquid or fat to reduce cooking times.

•

Start cooking on a high setting and reduce the setting when the food has heated

through.

Simmering, cooking rice

•

Simmering occurs below boiling point, at around 85˚C, when bubbles are just

rising occasionally to the surface of the cooking liquid. It is the key to delicious

Andere Handbücher für K 62

Inhaltsverzeichnis

Sprachen:

Andere Scandomestic Kochfeld Handbücher

Scandomestic

Scandomestic K 51 Bedienungsanleitung

Scandomestic

Scandomestic K 52 Bedienungsanleitung

Scandomestic

Scandomestic K 61 Bedienungsanleitung

Scandomestic

Scandomestic K51 Bedienungsanleitung

Scandomestic

Scandomestic IKP 60 Bedienungsanleitung

Scandomestic

Scandomestic IKF 180-1 Bedienungsanleitung

Scandomestic

Scandomestic IKF 285 Bedienungsanleitung

Scandomestic

Scandomestic K 62 Bedienungsanleitung

Scandomestic

Scandomestic IKF160-1 Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Miele

Miele KM 5987 Bedienungsanleitung

Miele

Miele KM 360 G Bedienungsanleitung