SC&T HKM01-4K Bedienungsanleitung

Smart Cabling & Transmission Corp.

V1.0_2008241 V1VV1.0_2008241

HDMI/ KVM Extender Series

User Manual

Model : HKM01-4K

4K HDMI USB/Audio/RS232/IR CAT5e KVM Extender 140M with

Fiber

User Manual

HKM01-4K

Introduction

HKM01-4K is a 4K HDMI KVM extender that use a cost-effective Ethernet cable to send HDMI, USB, Analog

audio, RS232, and IR signals with transmission distance up to 140 meters. Its TX unit has an HDMI loop out

port for an extra HDMI display. The built-in 4 USB2.0 ports at RX unit allow you to control the connected

HDMI device at remote end. The KVM extender can perfectly apply to the broadcasting system, digital

signage, home network integration, industrial control...etc.

Features

Resolutions up to 4K 30Hz 4:4:4.

Signal extension up to 120M over CAT5e, 140M over CAT6.

Built-in local loop out for an extra HDMI display at TX side.

Built-in 4 USB ports at RX unit.

Supports bi-directional analog audio transmission for microphones and headphones.

Supports bi-directional IR, RS232 transmission and EDID management.

Workable with SR01X (IP repeater) for longer distance.

Installation View

Work with SR01X

User Manual

HKM01-4K

Panel View

HKM01T-4K

No.

Interface

Function

SFP Connector

To insert a SFP transceiver module

LINK/ACT

To indicate the status of SFP link and data transmission

RJ45 Connector

To connect HKM01T-4K/ HKM01R-4K

HDMI IN

To connect a HDMI source

HDMI LOOPOUT

To connect a HDMI display

Power Supply

To plug in DC 5V power adapter

Power/LINK

To indicate the status of Power and LINK

Rotary Switch

To set up the grouping function

RS232

To connect a RS232-command-controllable device

IR Tx

To connect an IR emitter

LINE OUT

To connect a 3.5mm jack for a speaker

LINE IN

To connect a 3.5mm jack for a microphone

USB HOST

To connect an USB-B cable

User Manual

HKM01-4K

HKM01R-4K

No.

Interface

Function

HDMI OUT

To connect a HDMI display

MIC IN

To connect a 3.5mm jack for a microphone

IR Rx

To connect a 3.5mm jack for an IR receiver

Internal IR receiver

To receive IR signal

USB

To connect an USB-A cable

Description

1 LED Indication Status

Power On

Link On

Green ON

Blue On

2 SFP LED Indication

LINK ON

Data Transferring

Green ON

Blue On

User Manual

HKM01-4K

3 RJ45

3.1 RJ45 Pinout

3.2 RJ45 Indication Status:

Link On

Data Transferring

Green ON

Yellow On

4 RS232 Pinout Define

4.1 DB9 (Female) at transmitter unit, DB9 (Male) at receiver unit

Connector

DB9 (Male)

DB9 (Female)

RxD

TxD

RxD

DTR

GND

DSR

RTS

CTS

Color

Data

Orange-white

DATA0 +

Orange

DATA0 -

Green-white

DATA1 +

Blue

DATA2 +

Blue-white

DATA2 -

Green

DATA1 -

Brown-white

DATA3 +

Brown

DATA3 –

User Manual

HKM01-4K

Bottom View

No.

Interface

Function

Tx Button 1

To set up EDID

Tx DIP Switch

To set up Groups, RS232, and EDID

Rx Button 1

To check the status of MAC, IP, Baud Rate and EDID

Rx Button 2

To set up Baud Rate parameters

Rx DIP Switch

To set up Groups and to enable RS232 transmission

1 Grouping Tx and Rx

1.1 Set up the switch of Tx and Rx (HKM01T/R-4K) to choose a group.

1.2 Set up the rotary switch

(The switch setting of Tx and Rx in a same group should be the same)

1.3 Remove the power and plug it in again.

SWITCH

Group / Settings

SW1

Group 0

OFF↑

Group 1

ON↓

(Up to 32 pairs of Tx and Rx can be set)

User Manual

HKM01-4K

2 RS232

2.1 RS232 Setting

2.2 Baud Rate Setting

2.3 Baud rate supports 115200 (Default), 57600, 38400, 19200, 14400, 9600, 4800, 2400, and 1200bps.

If baud rate needs to be changed, please refer to the instructions below.

2.4 Check the bottom of the receiver (HKM01R-4K)

2.5 Press Button 1 to select Baud Rate.

2.6 Press Button 2 to choose parameter.

2.7 Press Button 1 again to confirm the change.

2.8 Set up the DIP switch of Tx and Rx (HKM01T/R-4K)

3. EDID Copy

3.1 Remove all the HDMI cables.

3.2 Set up the DIP switch of Tx (HKM01T-4K).

3.3 Push the button at the bottom of the transmitter (HKM01T-4K)

Tx (HKM01T-4K)

SWITCH

Function

Settings

SW2

RS232 On

(Default)

OFF↑

SW3

OFF↑

Rx (HKM01R-4K)

SWITCH

Function

Settings

SW2

RS232 On

(Default)

OFF↑

SWITCH

EDID Mode / Settings

SW4

1080p 2CH

(Default)

ON↓

Copy

the resolution

from Rx side

OFF↑

Copy

the resolution

from loop out side

ON↓

SW5

ON↓

OFF↑

Button

DIP Switch

User Manual

HKM01-4K

Digital /Analog Audio Conversion

Function

Transmitter

LINE IN

Transmitter

LINE OUT

Receiver

MIC IN

Receiver

LINE OUT

Description

Analog Bypass

Analog Audio IN, Analog Audio OUT

(Monitor Audio Muted)

Audio

Embedder

Analog Audio IN, HDMI Audio OUT

Audio

Extractor

HDMI IN, Analog Audio OUT

(support LPCM 2CH, monitor

muted)

HDMI Bypass

HDMI IN, HDMI Audio OUT

O = Connected X = Disconnected

※When the receiver's “LINE OUT” or “MIC IN is connected, the sound of monitor will be automatically

muted.

Trouble Shooting

1. We strongly recommend using high quality CAT5e, CAT6 UTP/STP/FTP cable. Improper installation

may cause unstable connection, and video & audio interruption.

2. The highest data rate can be 850Mbps, which might affect other devices at the same LAN.

3. Either UTP or SFP can be used as transmission medium.

4. When the cable of external IR receiver connects to RX, the front panel IR will be disabled.

5. Analog audio of Rx (MIC IN) is mono sound for microphone only, not stereo audio (Line in)

6. Output power of USB is up to 500mA per port, 1500mA in total.

7. RS232 does not support hardware handshake.

Package Include

HKM01T-4K Transmitter x 1 pcs

HKM01R-4K Receiver x 1 pcs

IR Emitter Cable x 1 pcs

USB A to B cable x 1

DC 5V2A Power Adapter x 2

Screw x 8

Screw plug x 8

Rubber gasket x2

User Manual

HKM01-4K

Specification

ITEM NO.

HKM01T-4K

HKM01R-4K

Support

Compliance

HDMI 1.4 , HDCP 1.4, USB 2.0/ 1.1/ 1.0

Max. Video Resolution

4K@30Hz

Max. Transmission Distance

140M over CAT6, 60KM over single mode fiber optic

Audio Format

LPCM7.1@192KHZ

RS232 Baud Rate

115200bps

IR Support

20-60Khz, ±45°, 5M

20-60Khz , ±45°, 5M

Ports & Interfaces

Video Input

1 x HDMI Type A

1 x RJ45, 1 x SFP

Video Output

1 x RJ45, 1 x SFP

1 x HDMI Type A

Video Loop-out

1 x HDMI Type A

Analog Audio Input

1 x (3.5mm) Stereo Phone Jack

1 x (3.5mm) Mono Phone Jack

Analog Audio Output

1 x (3.5mm) Stereo Phone Jack

IR Receiver

1 x (3.5mm) Stereo Phone Jack

IR Emitter

1 x (3.5mm) Stereo Phone Jack

RS232 Interface

1 x DB9 Female

1 x DB9 Male

USB Interface

1 x USB Type B

4 x USB Type A

Power

Power Supply

DC 5V 2A

Power Consumption

1200mA

400mA

Ambient Temperature

Operation

0 to 55℃

Storage

-20 to 85℃

Humidity

up to 95%

Physical Characteristics

Dimensions

125 x 140 x 30mm

Weight

380g

Andere Handbücher für HKM01-4K

Inhaltsverzeichnis

Andere SC&T Extender Handbücher

SC&T

SC&T IP09P Bedienungsanleitung

SC&T

SC&T HE05C Bedienungsanleitung

SC&T

SC&T IP05I Bedienungsanleitung

SC&T

SC&T HD401F8-5M Bedienungsanleitung

SC&T

SC&T IP06I Bedienungsanleitung

SC&T

SC&T IP02 Bedienungsanleitung

SC&T

SC&T VE01HA Bedienungsanleitung

SC&T

SC&T AE01D Bedienungsanleitung

SC&T

SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP... Bedienungsanleitung

SC&T

SC&T HKM01T-4K Bedienungsanleitung

SC&T

SC&T HE02PT Bedienungsanleitung

SC&T

SC&T CA101HDP Bedienungsanleitung

SC&T

SC&T UE02H Bedienungsanleitung

SC&T

SC&T HKM01T-4K Bedienungsanleitung

SC&T

SC&T HE02P Bedienungsanleitung

SC&T

SC&T HE20E Bedienungsanleitung

SC&T

SC&T VKM03 Bedienungsanleitung

SC&T

SC&T KM03 Series Bedienungsanleitung

SC&T

SC&T HE05BT Bedienungsanleitung

SC&T

SC&T HKM01-4K Bedienungsanleitung

SC&T

SC&T DKM01 Bedienungsanleitung

SC&T

SC&T HE02P Bedienungsanleitung

SC&T

SC&T VKM04 Bedienungsanleitung

SC&T

SC&T IP01 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung