SC&T HUS03-4K6G Bedienungsanleitung

Smart Cabling & Transmission Corp. V1.0

HDMI Switcher Series

User Manual

Model : HUS03-4K6G

4K60 3x1 HDMI/USB-C Presentation Switcher

User Manual

HUS03-4K6G

Introduction

HUS03-4K6G is a 3-in-1-out 4K@60Hz 4:4:4 video switcher designed to provide a user-friendly and

intuitive operation for presenters to have their thoughts well-delivered during a meeting. The switcher

supports HDMI and USB Type-C interfaces which can connect with most electronic devices and fulfill the

BYOD need.

Features

Resolution up to 4K@60Hz 4:4:4 and 1080p@120Hz.

Built-in 2 HDMI and 1 USB-C input ports.

USB Type-C supports PD (Power Delivery) for device charging.

Built-in contact closure for an external control keypad, 2-CH audio output, and relay for projector

screen control.

Supports auto sensing for HDMI and USB-C input.

Controllable via IR remote, RS232 command and external control keypad.

Diagram

User Manual

HUS03-4K6G

Panel View

Interface/ Port

Description

Internal IR Receiver

To receive IR signal from IR remote, carrier frequency at 38KHz.

Blank LED Button

To turn on/off the video display, auto-sensing, and default to factory

settings (Please refer to Description 7).

USB-C LED Button

To select USB Type-C DP Alternate Mode as the video output.

HDMI 1 LED Button

To select HDMI 1 as the video source

HDMI 2 LED Button

To select HDMI 2 as the video source

USB-C input Port

To use a USB-C cable to connect with a video/ audio source, can also

charge the connected device (Please refer to Description 2).

Audio Input

To use a 3.5mm audio cable to connect with a DVD player or a

microphone.

HDMI 1 Input Port

To use an HDMI cable to connect with an HDMI source (Please refer to

Description 2).

HDMI 2 Input Port

To use an HDMI cable to connect with an HDMI source (Please refer to

Description 2).

DIP Switch

To set up the EDID function (Please refer to Description 3)

HDMI Output Port

To Use an HDMI cable to connect with a HDMI display, such as a

monitor or a projector.

User Manual

HUS03-4K6G

Audio Output Interface

To use an audio cable to connect with speakers or an amplifier

(Please refer to Description 4).

Relay Interface

To connect with a projector screen to adjust the screen position

(Please refer to Description 5)

Contact Closure

To connect with an external control keypad.

External IR Interface

To use a 3.5mm IR cable to connect with an external IR receiver

(carrier frequency at 38KHz).

RS232 Interface

To connect with a PC for firmware upgrade or RS232 control (Please

refer to Description 7).

Power Interface

To connect with a lockable power supply (Suggest using at least DC

24V 3A power adapter).

Description 1 –LED Indications

LED Color

LED Status

USB-C / HDMI 1 / HDMI 2

Blank

No Color

Off

No Video

Blue

Blinking

Detecting

Blue

Video Display

Off

Description 2 –Recommended Cables & Connections

1. The USB-C port only delivers video/ audio and power, and doesn't support data transfer.

2. Some USB-C cables do not support video/audio transfer, please use those cables with e-mark and

compliant with USB3.2.

3. Once unplugged the USB-C device, we recommend you wait for 5 seconds to connect with the next

USB-C device. Frequently switching may result in the device undetected, which needs to unplug the

device and plug it again to work.

4. We recommend using premium and certified cables

Using an HDMI cable within 5M is recommended.

Using a USB Type-C cable within 2M is recommended.

5. Bad quality cables, connectors, inappropriate connections may cause unstable signal transmission.

User Manual

HUS03-4K6G

Description 3 - EDID

Mode & Configuration

EDID Mode

Switch 1

Switch 2

Description

Pass Through Mode

OFF↑

Refer to the connected monitor EDID (audio supports

192KHz)

4K Mode

ON↓

OFF↑

Resolution at 4K (Audio supports 2CH@48KHz)

1080p Mode

Any

ON↓

Resolution at 1080p(Audio supports 2CH@48KHz)

※After finishing the setting, make sure to turn the product off and turn it on again.

Description 4 –Audio

1. Connect Audio out to a balanced stereo audio speakers

2. Connect Audio out to an unbalanced stereo audio speakers

※The surround sound will output only through 2 channels

User Manual

HUS03-4K6G

Description 5 –Relay

Contact Rating

Load Type

Max. Allowable Voltage

AC 120V

DC 24V

Max. Allowable Current

AC 1A

Description 6 –Contact Closure

Please pay attention to the electrical wiring, wrong wiring may damage the product.

Interface

Description

Normally Open

Com

Common Contact

Off

Normally Closed

Function

LED

To enable LED indications on the control keypad

To provide 5V for the control keypad

GND

To connect a ground wire for the control keypad

USB-C

Connect a control keypad module to trigger USB-C

button

HDMI 1

Connect a control keypad module to trigger HDMI 1

button

HDMI 2

Connect a control keypad module to trigger HDMI 2

button

Blank

Connect a control keypad module to trigger Blank

button

User Manual

HUS03-4K6G

Description 7 –Console

Please use a male to female RS232 cable to connect the console port (Female) with a PC (Male).

Pinout

Description 8 –Switching Mode

Manual Mode

1. The priority of manual switching is over that of auto-switching.

2. When 2 inputs are connected, the manual switching function will turn off the auto switching

function for 20 secs.

3. When turning off the auto-switching function, you can only switch the video through pushbuttons, IR

remote, and RS232 commands.

Auto Mode

1. HUS03-4K6G will auto-detect the USB-C, HDMI 1, and HDMI 2 input and display the available video.

2. Auto mode priority

3. When multiple inputs are connected and remove one of them, HUS03-4K6G will auto-detect the

inputs for 6 secs and display the next available video source.

4. When you connect a video input and then plug in the next one, HUS03-4K6G will display the last

connected source.

Caution

When switch between video inputs, HUS03-4K6G will need to wait for 5~8 secs to display the video

source.

Position

Pin Definition

Pin 2

Pin 3

Pin 5

GND

Priority

Input

Last Displayed/ Connected Video

USB Type-C

HDMI 1

HDMI 2

User Manual

HUS03-4K6G

Turn On/ Off Auto Mode

1. Press and hold the “Blank” button for 3 secs to turn on/ off the auto mode.

2. Connect a PC with the console port and use RS232 command to turn on/ off the auto mode (Please

refer to the RS232 command chart)

3. LED indications for Auto mode status

a. Auto Mode: On

a. LED Indications: USB-C, HDMI 1, HDMI 2 will blink 6 times (About 5 secs) after turning on

HUS03-4K6G. And the LED of connected inputs will stay on.

b. Auto Mode: Off

a. LED Indications: USB-C, HDMI 1, HDMI 2 will blink 2 times (About 5 secs) after turning on

HUS03-4K6G. And the LED of connected inputs will stay on.

Description 9 –IR Remote

Configuration

If you use the IR remote for the first time or just replace the battery, please set up the IR

remote ID as 0 by pressing and , which will match the remote ID with that

of HUS03-4K6G.

Buttons & Functions

Button

Function

Blank ON/ OFF

To the previous video

To the next video

Reserved

User Manual

HUS03-4K6G

Select USB-Type C as the video source

Select HDMI 1 as the video source

Select HDMI 2 as the video source

Select USB Type-C/ HDMI 1/ HDMI 2 as the audio input source

Select 3.5mm as the audio input source

RELAY OFF

RELAY ON

Select HDMI audio as the audio output

Select 3.5mm as the audio output

Mute/ unmute the audio

Reserved

＋

Press and hold both buttons for 5 seconds to rest all settings

User Manual

HUS03-4K6G

Description 10 –RS232 Configuration & Commands

Serial Configuration: 8-N-1, Baud Rate at 115200

All commands (Non-case sensitive) are shown below

Command

Description

Remark

BLANK△1/0

BLANK ON/OFF

1: OFF

0: ON

BLANK△?

Get BLANK status

POWER△1/0

POWER ON/ OFF

1: ON

0: OFF

POWER△?

Get POWER status

PORT△1/2/3

Switch to HDMI 1/ HDMI 2/ USB Type-C

1: USB Type-C

2: HDMI 1

3: HDMI 2

To next port

To previous port

AUDIO△1/0

Switch Input audio source

0: Input Source

1: 3.5mm

AUDIO△?

Get input audio source status

SPEAKER△1/0

Switch output audio source

0: HDMI

1: External Audio

Output

SPEAKER△?

Get output audio source status

AUDIOMUTE△1/0

Unmute/ mute output audio

0: unmute

1: mute

AUDIOMUTE△?

Get output audio mute status

RELAY△1/0

RELAY ON/ OFF

0: OFF

1: ON

RELAY△?

Get RELAY status

RESET

Reset the Device

VERSION

Get firmware version

AUTO△1/0

Auto Mode ON/ OFF

0: OFF

1: ON

AUTO△?

Get Auto Mode status

DEFAULT

Default to Factory & Reset

HELP

Show all commands

Inhaltsverzeichnis

Andere SC&T Schalten Handbücher

SC&T

SC&T TPA008A Bedienungsanleitung

SC&T

SC&T TPP016VPD Bedienungsanleitung

SC&T

SC&T TPA008AH Bedienungsanleitung

SC&T

SC&T DS02 Bedienungsanleitung

SC&T

SC&T IP04X Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch