Sceptre E328BV-MDC Bedienungsanleitung

QUICK START GUIDE

To start watching the TV right away you must complete the following steps :

1. Verify you have received everything

2. Attach the stand to the TV

3. Install the batteries to the remote control

4. Connect power and a cable or antenna to the TV

5. Turn on your TV and scan for channels

6. Your TV is ready for viewing

7. Sceptre wants to help you save energy! This HDTV meets the ENERGY

STAR® guidelines. The default setting for this HDTV is set to POWER

SAVING mode. You can change this setting by pressing the PICTURE

button on the remote control twice.

1. E328BV-MDC Package Contents

SCEPTRE TV Display x 1

TV Stand x 1

Neck Assy x 1

User Manual x 1

Quick Start Guide x 1

Torque Screws x 7 (thick threaded) TYPE1 SCREW

Machined Screws x 2 (fine threaded) TYPE2 SCREW

Screw Driver x 1

Power Cord x 1

Warranty / Registration Card x 1

TV Remote Control (AAA Battery included) x 1

2. Attaching the TV Stand

1. Obtain 5 torque screws from the package and attach the 5 screws to the bottom of

the base against the neck.

2. To attach the stand place the display unit flat on a table. Afterwards attach the

stand onto the display and screw in the 4 screws to secure the stand.

Rear View Mounting Pattern

Mounting Specification: 200mm x 200mm using screw size M5. Length of screw should not exceed 9mm.

Please Note: The 9mm length of screw refers to how deep the screw can go inside the mounting holes. When

you’re buying screws, you should add the original 8mm to the thickness of your mounting plate in order to get

the total screw length.

3. Installing Batteries to the Remote

Please insert two AAA batteries into the remote control. Make sure that you match the

(+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery

compartment. Afterwards, re-attach the battery cover.

Please note:

•Only use AAA batteries.

•Do not mix new and old batteries. This may result in cracking or leakage that may

pose a fire risk or lead to personal injury.

•Inserting the batteries incorrectly may also result in cracking or leakage that may

pose a fire risk or lead to personal injury.

•Dispose the batteries in accordance with local laws and regulations.

•Keep the batteries away from children and pets.

•If the remote control is not used for a long time, remove the batteries.

•Keep the remote control away from moisture, sunlight, and high temperatures.

4. Connecting Your Cables

The following picture offers a suggestion for connecting most of your audio video equipment.

5.Ready to Watch Some TV?

Starting up the HDTV

1. Make sure your power cable is connected and the standby red light in the front of the

HDTV is lit up.

2. Check all your connection cables off the side or the back of your HDTV and also your

AV devices. Make sure they are all connected securely.

3. Turn on your HDTV and other AV devices if necessary.

4. Select the correct source according to the Connecting pages.

If You’ve Connected Antenna or Cable to the HDTV…

If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go

through an INITIAL SETUP process in order to watch the HDTV.

1. Press MENU to open the menu

2. Use the ◄or ►button to select the CHANNEL icon and press ENTER.

3. Use the ▲or ▼buttons to highlight the signal type and press ◄or ►to select your

connection either AIR or CABLE.

4. Use the ▲or ▼buttons to select AUTO CHANNEL SEARCH and press ENTER to scan

for channels.

5. Once the scanning finishes, you can begin to watch HDTV.

If You’ve Connected set-top boxes to the HDTV…

1. Press the S button on top of the HDTV or the SOURCE button on the remote control

and you will see the picture above.

2. Use ▲▼ buttons to select the source you want to switch to and press the ENTER

button in the middle of the ▲▼ buttons.

Please Note :

•Not all broadcasts are in High Definition (HD). Please refer to your local

broadcasting stations for more information.

•The HDTV’s tuner is designed for HDTV therefore requires a stronger

signal than normal TVs. If you cannot achieve that signal level with

your antenna or cable, your HDTV might lose picture or sound.

•HDMI 3 also doubles as a MHL enabled port, so if you have a cell phone that

supports the Mobile High-definition Link, you can purchase a MHL cable and

connect it to HDMI 3.

Inhaltsverzeichnis

Andere Sceptre Fernseher Handbücher

Sceptre

Sceptre U435 Series Bedienungsanleitung

Sceptre

Sceptre X370BV-FHD Bedienungsanleitung

Sceptre

Sceptre X325BV-FMDR Bedienungsanleitung

Sceptre

Sceptre E24 Bedienungsanleitung

Sceptre

Sceptre E325BV-HDU Bedienungsanleitung

Sceptre

Sceptre X322BV-SRR Bedienungsanleitung

Sceptre

Sceptre E195BD-SHD Bedienungsanleitung

Sceptre

Sceptre X42 Bedienungsanleitung

Sceptre

Sceptre U55 Series Bedienungsanleitung

Sceptre

Sceptre X32 Series Bedienungsanleitung

Sceptre

Sceptre X37SV-NAGA Bedienungsanleitung

Sceptre

Sceptre U515CV-UMKR Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips Colour Television Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung