Schrack Seconet VISOCALL IP Bedienungsanleitung
www.schrack-seconet.com
HEALTH CARE
User Manual.
VISOCALL IP.
Ward Terminal DZT-IP.
DZT-IP V3.1 - User manual
Ward Terminal DZT-IP - Table of Contents
K-HB-010EN 3
Table of Contents
1. Foreword ......................................................................................................4
2. Ward terminal ...............................................................................................5
3. General .........................................................................................................6
3.1 Idle State ................................................................................................................................................ 6
4. Announcements.............................................................................................8
4.1 General Announcement...................................................................................................................... 9
4.2 Nurse Announcement ......................................................................................................................... 9
4.3 Doctor Announcement ..................................................................................................................... 10
4.4 Staff Announcement ......................................................................................................................... 10
5. Call indication and call processing ...............................................................11
6. Overview ....................................................................................................14
6.1 List of all rooms................................................................................................................................. 14
6.2 List of rooms with set presence.......................................................................................................15
6.3 List of rooms with reminder............................................................................................................ 15
6.4 List of rooms with care group assignment .................................................................................... 16
7. Establishing a direct speech connection........................................................17
8. Patient upgrade ..........................................................................................19
9. Ward interconnection ..................................................................................21
10. Settings .......................................................................................................23
10.1 Date and time...................................................................................................................................... 24
10.2 Volume ................................................................................................................................................. 25
11. Fault indication ............................................................................................26
12. Failure .........................................................................................................27
13. Cleaning and Disinfection ............................................................................27
14. Operation and Maintenance........................................................................27
DZT-IP V3.1 - User manual4
Ward Terminal DZT-IP - Foreword
K-HB-010EN
1. Foreword
The most modern nurse call system currently available is installed in your premises, and it will
make your daily work easier. The integrated communications platform will offer you substanti-
al relief, thereby allowing you more time for caring for the people within your care.
The safety of your patients and residents, as well as ensuring that the devices are simple to
operate, are both of high priority.
Fully automatic functional processes increase the comfort of operating the system and incre-
ase safety. The VISOCALL-IP ward terminal operating instructions are intended to serve
as a reference volume to support you and assume basic knowledge that has been obtained
from the VISOCALL-IP communications terminal operating instructions.
Schrack Seconet wishes you every success with the system!
DZT-IP V3.1 - User manual
Ward Terminal DZT-IP - Ward terminal
K-HB-010EN 5
2. Ward terminal
handdevice
presence in dutyroom
date and time
numbers of faults
numbers of presence
numbers of calls in the ward
ward interconncetion manual
function buttons blue
function buttons yellow
microphone
h
an
dd
evice
fu
nction
bu
function buttons yellow
mic
r
op
DZT-IP V3.1 - User manual6
Ward Terminal DZT-IP - General
K-HB-010EN
3. General
By pressing the relevant function key, you enter into various submenus dependent on which
icon and description is next to the key. This applies not only for the vertical banks of blue
keys to the left and right of the display, but also for the yellow keys below the display. You can
always return to the previous menu by pressing the yellow key underneath the „Back“
symbol.
When the call and overview lists contains more than four lines of entries, then two blue scrol-
ling arrows appear in the function line of the display. By pressing the yellow keys underneath
these symbols, you can scroll up and down.
3.1 Idle State
In idle state, the interface of the ward terminal, hereafter referred to as the „DZT“, appears
as follows:
Status line
Function line
Fig. 1
:DUGVHWWLQJV
2YHUYLHZ
Nurse Call
'RFWRU&DOO
Heart Alarm
$XGLR6HWWLQJV
DZT-IP V3.1 - User manual
Ward Terminal DZT-IP - General
K-HB-010EN 7
Caution:
The displaying of the three types of presence can be disabled by means of configuration - i.e.
in certain circumstances the presence symbols above the yellow keys are not visible.
You will find the following state information in the status line:
• Top left date and time (optional)
• Next to that the status of the ward interconnection and centralization
• Currently set staff presences (nurse 1, nurse 2, Doctor)
• on the right the number of current calls, reminders and faults or failures
The symbols for all staff categories appear in the function bar. You can set the relevant pre-
sence at the ward terminal using the yellow keys below the „Presence“ symbol.
Using the three blue keys on the right hand side for nurse call, doctor call and heart alarm,
you can trigger the corresponding calls and reset them again on the DZT.
DZT-IP V3.1 - User manual8
Ward Terminal DZT-IP - Announcements
K-HB-010EN
4. Announcements
Press the blue key on the right hand side next to the „Audio“ (Fig. 1) symbol to enter the
announcement menu (Fig. 2). Using the blue keys on the right hand side, you can now choose
between general, nurse, doctor or staff announcements.
Keep the relevant key pressed for the duration of the time you wish to speak for (Fig. 3-6).
If the key is released again, the announcement is ended and the main menu (Fig. 1) is shown
again.
Status line
Function line
Fig. 2
Caution:
The displaying of the 4 types of presence can be disabled by means of configuration - i.e. in
certain circumstances the announcement symbols next to the blue keys are not visible.
Announcement
Announcement
QXUVH
Announcement
GRFWRU
Announcement
staff
DZT-IP V3.1 - User manual
Ward Terminal DZT-IP - Announcements
K-HB-010EN 9
4.1 General Announcement
Status line
Function line
Fig. 3
4.2 Nurse Announcement
Status line
Function line
Fig. 4
Announcement
general
SOHDVHVSHDN
Announcement
QXUVH
SOHDVHVSHDN
DZT-IP V3.1 - User manual10
Ward Terminal DZT-IP - Announcements
K-HB-010EN
4.3 Doctor Announcement
Status line
Function line
Fig. 5
4.4 Staff Announcement
Status line
Function line
Fig. 6
Announcement
doctor
SOHDVHVSHDN
Announcement
staff
SOHDVHVSHDN
DZT-IP V3.1 - User manual
Ward Terminal DZT-IP - Call indication and call processing
K-HB-010EN 11
5. Call indication and call processing
As soon as a call is triggered in the ward, the display changes automatically and the call is dis-
played in detail - with information about the room and/or bed number and the type of call. If
there are several calls outstanding at the same time, the call with the highest priority is always
displayed most prominently. In the following example you can recognise 3 different calls and
process them as follows:
• The querying of a specific call can be carried out by pressing the blue key
next to the corresponding call symbol
• The call with the highest priority level can be queried by pressing
the yellow key below the symbol.
Status line
Function line
Fig. 7
(PHUJHQ\&DOO%HG
:DUG&RPIRUWURRP
%HG
&DOO%HG
:DUG5RRP
%HG
6HUYLFH&DOO
:DUG5RRP
%HG
Andere Handbücher für VISOCALL IP
1
Inhaltsverzeichnis
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung