SCHUNK VERO-S NSE plus 90 Bedienungsanleitung

Translation of Original Operating Manual

VERO-S quick-change pallet system

NSE plus, NSL plus, NSD plus

Assembly and Operating Manual

Superior Clamping and Gripping

Imprint

2 04.00|NSE plus, NSL plus, NSD plus |en

Imprint

This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights

reserved. Any reproduction, processing, distribution (making available to third parties),

translation or other usage - even excerpts - of the manual is especially prohibited and

requires our written approval.

Technical changes:

We reserve the right to make alterations for the purpose of technical improvement.

Document number: 0489060

Version: 04.00 |05/03/2018|en

Dear Customer,

thank you for trusting our products and our family-owned company, the leading technol-

ogy supplier of robots and production machines.

Our team is always available to answer any questions on this product and other solutions.

Ask us questions and challenge us. We will find a solution!

Best regards,

Your SCHUNK team

H.-D. SCHUNK GmbH & Co.

Spanntechnik KG

Lothringer Str. 23

D-88512 Mengen

Tel. +49–7572-7614-0

Fax +49-7572-7614-1099

[email protected]

schunk.com

Table of contents

04.00|NSE plus, NSL plus, NSD plus |en

Table of contents

General .................................................................................................................... 5

1.1

About this manual .................................................................................................... 5

1.1.1

Presentation of Warning Labels.................................................................... 5

1.1.2

Applicable documents................................................................................... 6

1.1.3

Sizes............................................................................................................... 6

1.2

Warranty................................................................................................................... 6

1.3

Scope of delivery ...................................................................................................... 7

1.4

Accessories ............................................................................................................... 8

Basic safety notes .................................................................................................... 9

2.1

Intended use............................................................................................................. 9

2.2

Not intended use ...................................................................................................... 9

2.3

Constructional changes ............................................................................................ 9

2.4

Spare parts.............................................................................................................. 10

2.5

Environmental and operating conditions............................................................... 10

2.6

Personnel qualification........................................................................................... 10

2.7

Personal protective equipment.............................................................................. 11

2.8

Notes on safe operation......................................................................................... 12

2.9

Transport ................................................................................................................ 12

2.10

Malfunctions........................................................................................................... 12

2.11

Disposal................................................................................................................... 13

2.12

Fundamental dangers............................................................................................. 13

2.12.1

Protection during handling and assembly .................................................. 13

2.12.2

Protection during commissioning and operation ....................................... 14

2.12.3

Protection against dangerous movements................................................. 14

2.12.4

Notes on particular risks ............................................................................. 15

Technical data ......................................................................................................... 18

3.1

Special technical data NSE plus 138 ....................................................................... 19

Assembly................................................................................................................. 20

4.1

Pre-assembly .......................................................................................................... 20

4.2

Installing and connecting ....................................................................................... 20

4.3

Fastening and connection ...................................................................................... 21

4.3.1

NSE plus 90.................................................................................................. 23

4.3.2

NSE plus 99.................................................................................................. 24

4.3.3

NSE plus 99-V1 ............................................................................................ 25

4.3.4

NSE plus 138................................................................................................ 26

4.3.5

NSE plus 138-V1 .......................................................................................... 27

Table of contents

4 04.00|NSE plus, NSL plus, NSD plus |en

4.3.6

NSE-T plus 138............................................................................................. 28

4.3.7

NSE-T plus 138-V1 ....................................................................................... 29

4.3.8

NSE plus 176................................................................................................ 30

4.3.9

NSE plus 176-V1 .......................................................................................... 31

4.3.10

NSE plus 100-75 .......................................................................................... 32

4.4

NSL plus / NSD plus modules for stationary use .................................................... 34

4.4.1

NSL plus 150 / NSD plus 150 ....................................................................... 35

4.4.2

NSL plus 150-V1 / NSL plus 150-V1-T.......................................................... 36

4.4.3

NSL plus 200 / NSD plus 200 ....................................................................... 37

4.4.4

NSL plus 200-V1-T ....................................................................................... 39

4.4.5

NSL plus 400 ................................................................................................ 40

4.4.6

NSL plus 600 ................................................................................................ 42

4.4.7

NSL plus 800 ................................................................................................ 44

4.5

Clamping pins SPA 40, SPB 40, SPC 40, SPG 40 ...................................................... 46

4.5.1

Information to clamping pin SPG 40 ........................................................... 48

4.6

Options ................................................................................................................... 48

4.6.1

Dynamic pressure monitoring of the clamping slide position for quick-

change pallet modules ................................................................................ 48

4.6.2

Connecting strip ASL1-G1/8", ASL2-G1/8".................................................. 50

4.7

Pneumatic circuit diagram...................................................................................... 52

4.8

Screw tightening torques ....................................................................................... 53

Operation................................................................................................................ 54

Maintenance and care ............................................................................................. 55

Troubleshooting ...................................................................................................... 56

7.1

The clamping area does not unlock ....................................................................... 56

7.2

The clamping area does not unlock properly......................................................... 56

7.3

The quick-change pallet system no longer opens quietly...................................... 56

Seal kit and part lists ............................................................................................... 57

8.1

Seal kit lists ............................................................................................................. 57

8.2

Part lists .................................................................................................................. 59

Assembly Drawings ................................................................................................. 63

9.1

NSE plus (cylindrical version).................................................................................. 63

9.2

NSE plus-V1 (cylindrical version) ............................................................................ 64

9.3

NSE plus 100-75...................................................................................................... 65

Declaration of Incorporation ................................................................................... 66

Appendix on Declaration of Incorporation, as per 2006/42/EC, annex II, No. 1 B ..... 67

General

04.00|NSE plus, NSL plus, NSD plus |en

General

About this manual

This manual contains important information for a safe and appro-

priate use of the product.

This manual is an integral part of the product and must be kept

accessible for the personnel at all times.

Before starting work, the personnel must have read and under-

stood this operating manual. Prerequisite for safe working is the

observance of all safety instructions in this manual.

Illustrations in this manual are provided for basic understanding

and may differ from the actual product design.

In addition to these instructions, the documents listed under

(1.1.2, Page 6) are applicable.

Presentation of Warning Labels

To make risks clear, the following signal words and symbols are

used for safety notes.

DANGER

Danger for persons!

Non-observance will inevitably cause irreversible injury or death.

WARNING

Dangers for persons!

Non-observance can lead to irreversible injury and even death.

CAUTION

Dangers for persons!

Non-observance can cause minor injuries.

NOTICE

Material damage!

Information about avoiding material damage.

1.1

1.1.1

General

6 04.00|NSE plus, NSL plus, NSD plus |en

Applicable documents

• General terms of business*

• Catalog data sheet of the purchased product *

The documents marked with an asterisk (*) can be downloaded on

our homepage schunk.com

Sizes

This operating manual applies to the following sizes:

Quick-Change Pallet System

• NSE plus 90

• NSE plus 99 / NSE plus 99-V1

• NSE plus 138 / NSE plus 138-V1

• NSE-T plus 138 / NSE-T plus 138-V1

• NSE plus 176 / NSE plus 176-V1

• NSE plus 100-75

Clamping station

• NSL plus 150 / NSL plus 150-V1 / NSL plus 150-V1-T /

NSD plus 150

• NSL plus 200 / NSL plus 200-V1-T / NSD plus 200

• NSL plus 400

• NSL plus 600

• NSL plus 800

Warranty

The warranty period is 24 months after delivery date from factory

or 500 000 cycles*, if it is used as intended, under the following

conditions:

• Observe the applicable documents (1.1.2, Page 6)

• Observe the ambient conditions and operating conditions,

(2.5, Page 10)

• Observance of the specified care and maintenance instructions

(6, Page 55)

Parts touching the workpiece and wear parts are not included in

the warranty.

* A cycle consists of a complete clamping process ("Open" and

"Close").

1.1.2

1.1.3

1.2

General

04.00|NSE plus, NSL plus, NSD plus |en

Scope of delivery

The scope of delivery includes

• Quick-change pallet system in the variant ordered

• Accessory pack

NSE plus 90: 2 O-rings Ø 4 x 1.5, 2 set-screws M4 x 4

NSE plus 99: 2 O-rings Ø 4.5 x 1.5, 6 cover caps,

6 mounting screws M6

NSE plus 99-V1: 2 O-rings Ø 4.5 x 1.5, 6 cover caps,

6 mounting screws M6

NSE plus 138: 3 O-rings Ø 9 x 1.5, 6 cover caps

6 mounting screws M8

NSE plus 138-V1: 3 O-rings Ø 9 x 1.5, 6 cover caps,

6 mounting screws M8

NSE-T plus 138: 2 O-rings Ø 9 x 1.5, 6 cover caps,

6 mounting screws M8

NSE-T plus 138-V1: 2 O-rings Ø 9 x 1.5, 6 cover caps,

6 mounting screws M8

NSE plus 176: 3 O-rings Ø 9 x 1.5, 6 cover caps,

6 mounting screws M8

NSE plus 176-V1: 3 O-rings Ø 9 x 1.5, 6 cover caps,

6 mounting screws M8

NSE plus 100-75: 3 O-rings Ø 4.5 x 1.5, 4 cover caps,

4 mounting screws M8

• Clamping station in the version ordered

• Accessory pack and separate packing units

NSL plus 150: 2 cylindrical clamp blanks (BRR 50)

NSL plus 150-V1: 1 sealing ring G1/8“, 1 sealing nipple G1/8“, 1

pneumatic plug-in connection for nominal hose width Ø 4, 2 cy-

lindrical clamp blanks (BRR 50)

NSL plus 150-V1-T: 2 sealing rings G1/8“, 2 sealing nipples

G1/8“, 2 pneumatic plug-in connections for nominal hose width

Ø 4, 2 cylindrical clamp blanks (BRR 50)

NSD plus 150: 2 cylindrical clamp blanks (BRR 50)

NSL plus 200: 1 sealing ring G1/8“, 1 sealing nipple G1/8“, 1

pneumatic plug-in connection for nominal hose width Ø 4, 4 cy-

lindrical clamp blanks (BRR 50)

NSL plus 200-V1-T: 2 sealing rings G1/8“, 2 sealing nipples

G1/8“, 2 pneumatic plug-in connections for nominal hose width

Ø 4, 4 cylindrical clamp blanks (BRR 50)

NSD plus 200: 4 cylindrical clamp blanks (BRR 50)

1.3

General

8 04.00|NSE plus, NSL plus, NSD plus |en

NSL plus 400: 1 sealing ring G1/8“, 1 sealing nipple G1/8“,

1 pneumatic plug-in connection for hose nominal width Ø 6,

2 eye bolts M8,

4 cylindrical clamp blanks (BRR 50) NSL plus 600:

1 sealing ring G1/8“,

1 sealing nipple G1/8“,

1 pneumatic plug-in connection for nominal hose width Ø 6,

2 eye bolts M8,

6 cylindrical clamp blanks (BRR 50) NSL plus 800:

1 sealing ring G1/8“,

1 sealing nipple G1/8“,

1 pneumatic plug-in connection for nominal hose width Ø 6,

2 eye bolts M8,

8 cylindrical clamp blanks (BRR 50)

Accessories

(see catalog or data sheets when ordering separately)

• Clamping pallets PAL

• Clamping pins SPA, SPB, SPC, SPG

• Connecting strip ASL1-G1/8", ASL2-G1/8"

• BRR clamping ring

• Assembly and retrofit station MRS

• Dome-shaped centering bushing ZKA

• Protection cover SDE

• PBN fitted bolts

1.4

Basic safety notes

04.00|NSE plus, NSL plus, NSD plu

s |en

Basic safety notes

Intended use

This product is intended solely for positioning and clamping work-

pieces or clamping pallets on machine tools or other suitable tech-

nical devices.

• The product may only be used within the scope of its technical

data, (3, Page 18).

• The product is intended for industrial and industry-oriented

use.

• Appropriate use of the product includes compliance with all in-

structions in this manual.

Not intended use

The product is not being used as intended if, for example:

• It is used as a pressing tool, a chuck, a load-handling device or

as lifting equipment.

• It is used for turning applications without consulting SCHUNK.

• It is used in working environments that are not permissible.

• People work on machines or technical equipment that do not

comply with the EC Machinery Directive 2006/42/EC, disregard-

ing the applicable safety regulations.

• The technical data specified by the manufacturer are exceeded

during usage.

Constructional changes

Implementation of structural changes

By conversions, changes, and reworking, e.g. additional threads,

holes, or safety devices can impair the functioning or safety of the

product or damage it.

• Structural changes should only be made with the written ap-

proval of SCHUNK.

2.1

2.2

2.3

Basic safety notes

10 04.00|NSE plus, NSL plus, NSD plus |en

Spare parts

Use of unauthorized spare parts

Using unauthorized spare parts can endanger personnel and dam-

age the product or cause it to malfunction.

• Use only original spare parts or spares authorized by SCHUNK.

Environmental and operating conditions

Required ambient conditions and operating conditions

Incorrect ambient and operating conditions can make the product

unsafe, leading to the risk of serious injuries, considerable material

damage and/or a significant reduction to the product's life span.

• Make sure that the product is used only in the context of its de-

fined application parameters, (3, Page 18).

• Make sure that the product is a sufficient size for the applica-

tion.

• Make sure that the contact surfaces of the interface are always

clean.

• Make absolutely sure that no chips of any kind can enter the in-

terface and that the interface does not fill with cooling emul-

sion, which is particularly possible with vertical positioning of

the clamping pin axis. The best way to ensure both of these is

to use the SDE protection covers. If the interface should fill with

cooling emulsion, initiate the unlocking process and dry out the

interface in actuated state.

• Only use high-quality cooling emulsions with anti-corrosive ad-

ditives during processing.

Personnel qualification

Inadequate qualifications of the personnel

If the personnel working with the product is not sufficiently quali-

fied, the result may be serious injuries and significant property

damage.

• All work may only be performed by qualified personnel.

2.4

2.5

2.6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SCHUNK Industrieanlagen Handbücher

SCHUNK

SCHUNK EGH Montageanleitung

SCHUNK

SCHUNK ROTA NCR 165 Gebrauchsanweisung

SCHUNK

SCHUNK PHL-W 25 Gebrauchsanweisung

SCHUNK

SCHUNK PHE Gebrauchsanweisung

SCHUNK

SCHUNK TENDO Turn DKE Bedienungsanleitung

SCHUNK

SCHUNK PGS3 Montage- und Bedienungsanleitung

SCHUNK

SCHUNK EGA-W Gebrauchsanweisung

SCHUNK

SCHUNK PZN-plus Gebrauchsanweisung

SCHUNK

SCHUNK GWB 34-80 Einrichtungshandbuch

SCHUNK

SCHUNK RST-D 60 Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSR3 138 Gebrauchsanweisung

SCHUNK

SCHUNK KGG Series Gebrauchsanweisung

SCHUNK

SCHUNK PHL Series Gebrauchsanweisung

SCHUNK

SCHUNK MPG-plus 16 Gebrauchsanweisung

SCHUNK

SCHUNK GSW-B-AGE Gebrauchsanweisung

SCHUNK

SCHUNK SRH-plus-D Gebrauchsanweisung

SCHUNK

SCHUNK WSG Series Montageanleitung

SCHUNK

SCHUNK TENDO Slim 4ax Gebrauchsanweisung

SCHUNK

SCHUNK EGI Series Gebrauchsanweisung

SCHUNK

SCHUNK ROTA THWvario Gebrauchsanweisung

SCHUNK

SCHUNK SKE Series Gebrauchsanweisung

SCHUNK

SCHUNK JGP-P Gebrauchsanweisung

SCHUNK

SCHUNK PZN-plus Gebrauchsanweisung

SCHUNK

SCHUNK PGN-plus-P Gebrauchsanweisung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung

BAC

BAC BCP2D Bedienungsanleitung