2
Stationary Air Compressor System Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
To reduce the risk of re, electrical shock, injury to
persons, or damage when using this equipment, follow
basic precautions including the following:
1. Read and follow ALL user instructions and
recommended procedures and safety precautions
as provided in this manual. Failure to do so could
result in serious injury or death.
2. Read and follow all DANGER, WARNING, and
CAUTION statements in this instruction. Failure to
do so could result in serious injury or death. These
statements use the following pattern:
DANGER
Danger is used to indicate the presence of a haz-
ard that will cause severe personal injury, death,
or substantial equipment damage if the warning is
ignored.
WARNING
Warning is used to indicate the presence of a hazard
which may cause severe personal injury or substan-
tial component damage if the warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard
which can cause minor personal injury or component
damage if the warning is ignored.
NOTE
Notes are used to notify the operator of installa-
tion, operation, or maintenance information that
is important but not hazard-related.
3. Do not operate this equipment while under the
inuence of drugs, alcohol, or any medications or
substances which may affect vision, dexterity, or
judgment. Users of this equipment must be in good
physical and mental health in order to operate
safely. Do not use this equipment when fatigue
prevents safe operation. Stay alert when operating
this equipment. Inattention or carelessness while
operating this equipment may result in serious
injury or death.
4. Training is required before use of this equipment.
Improper use may result in serious injury or
death. Improper use includes, but is not limited
to, use without adequate training, disregard of the
warnings and instructions contained herein, use of
the equipment for purposes not included in these
instructions, and failure to inspect and maintain
the equipment.
5. All electrical connections shall be installed by a
qualied electrician in accordance with applicable
electrical codes and shall include proper grounding
of the equipment.
6. All service must be performed by qualied trained
technicians. When servicing, disconnect power from
the equipment and follow all necessary Lock-Out/
Tag-Out procedures and safety procedures.
7. Hot surfaces can cause serious injury. Allow the
equipment to cool before servicing.
8. Establish a schedule for performing routine
maintenance as outlined in these instructions.
9. Refer to the Material Safety Data Sheet (MSDS) for
instructions on the safe handling of any chemicals
used in the maintenance or servicing of this
equipment.
10. Moving parts can cause serious injury. Be sure all
guards and covers are in place and secure before
starting the unit.
11. High pressure air is dangerous. Handle the high
pressure air connections and hoses with care to
prevent serious injury or death.
12. The air produced by this equipment must be
recertied periodically as meeting CGA Grade D or
better breathing quality air. Regular recertication
to this standard is the responsibility of the user.
13. If this equipment does not operate as described in
these instructions, DO NOT USE THE EQUIPMENT.
Follow your procedures to remove the equipment
from service including any “Lock-out/Tag-out”
procedures to prevent use of the equipment.
Contact authorized personnel to inspect and
service the equipment.
14. If you have any questions or concerns regarding the
installation, use, or maintenance of this equipment,
contact your authorized SCOTT distributor, or
contact SCOTT at 1-800-247-7257 (or 704-291-
8300 outside the continental United States) or visit
our web site at www.scottsafety.com.
