SDC TCC Series Bedienungsanleitung

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV D 10/20 Page 1

Any suggestions or comments to this instruction or

product are welcome. Please contact us through

our website or email engineer@sdcsecurity.com

TCC/RCC

Series Modular Consoles

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 2

Intentionally left blank

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 3

1.0

1.1 Product Description

1.2 Product Features

1.3 Product Specifications

1.4 Rocker Switch Types (All outputs are dry outputs)

1.5 Switch Panel

2.0

2.1 Connector Boards

2.1.1 Rocker Switch Outputs

2.1.2 Reset Button/Key Lock Switch Output

2.1.3 LED/Alarm Power

2.1.4 Control Inputs

3.0

3.1 Direct Connection to Locking Devices with 2-State Status LED

(Door Closed) (for AL or BL Series Panels)

3.2 Direct Connection to Locking Devices with 3-State Status LED

(Door Secure/Door Unsecure/ Open) (for AL or BL Series Panels)

3.3 Connecting Locking Devices via UR-1 Universal Relay

(applicable to all panel models)

3.4 Procedure

4.0

TABLE OF CONTENTS

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 4

Intentionally left blank

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 5

1.0 INTRODUCTION

1.1 Product Description

The TCC and RCC Series Modular Consoles provide a flexible, economical method of centrally supervising and

multiple openings within a facility. The Consoles are offered ineither a Desktop or (RCC)

Consoles can be by selecting the desired modular

Various panels are available

• Different quantities of switches (4switches minimum, increasing in multiples of 4)with

• Different types of switches (2 or momentary or latching), various

• Optional key switch, reset button, and audible

The TCC accepts up to panels and the RCC accepts up to panels. SeeSection 1.3 for

switch

The RCC can be installed in a standard 19” rack or in optional tabletop CAB enclosures which hold either one or

RCC’s (CAB12).

1.2 Product Features

• The consoles are designed for real-time observation and control by security

• Easy to understand visual indicators and control switches simplify door supervision and

• The TCC/RCC Series Consoles consist of an enclosure, switches, LEDs and terminal connector

• An audible alarm beeper is provided with “E” type switch panels containing the Alarm Shunt, Reset Button and Key

• The Consoles can also be used to manually override doors by an access control

• Combine TCC orRCC consoles with the Series 600 Power Supplies and UR4-8 universal relay processor for a complete

with optional monitoring and

• The consoles can be directly wired to locking devices, or they can be connected via door

relay modules such as SDC UR-1 or UR4-8. When used in with a UR-1 or UR4-8, the tri-color LEDs may

used to see the status of doors (secure, authorized unlock, forced

• The Key Switch may be used for Console Lockout (UR4-8 required). The Lockout feature ensures that only personnel

can operate the console. Two consoles can control a shared opening by both to the input of door relay

control module (consult

• Forced door are indicated by a beeper and Red LED (‘E’ panel required) but the audible alarm can be

and the LED indication remains on until the status condition returns to

• Heavy duty switches provide high operational

TCC x *L8 x *L4E

(12 stations shown) RCC x *L8 x *L8 x *L4E x CAB7

(20 stations shown)

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 6

1.0 INTRODUCTION

1.3 Product Specifications

RCC

Description:

Color:

Dimensions:

Capacity

Rack Mount Console

Beige front panel

19"W x 5-1/4”H x 6"D

24 stations maximum when using three switch panels (max.is 20 stations with an “E” panel).

Base unit, less switch panels. See Page 6 for panel configurations

RCC

Description:

Color:

Dimensions:

Capacity

Rack Mount Console

Beige front panel

19"W x 5-1/4”H x 6"D

24 stations maximum when using three switch panels (max.is 20 stations with an “E” panel).

Base unit, less switch panels. See Page 6 for panel configurations

TCC:

Description:

Color:

Dimensions:

Capacity

Slope Front Desktop Console

Black Housing, Beige Top

10-1/4”W x 4-3/4”H x 9-5/8"D

12 stations maximum when using 2 switch panels.

Base unit, less switch panels. See Page 6 for panel configurations

TCC:

Description:

Color:

Dimensions:

Capacity

Slope Front Desktop Console

Black Housing, Beige Top

10-1/4”W x 4-3/4”H x 9-5/8"D

12 stations maximum when using 2 switch panels.

Base unit, less switch panels. See Page 6 for panel configurations

Switch Panels (All Models):

Switch Type:

Switch/LED Count:

Rocker Switch Rating:

DRY Rocker Switch Output; 2- or 3-position (model dependent);

Black Cap w/ white numeral;

4 or 8 per panel (model dependent)

2 Amp @ 24VDC (resistive)

5"W x 5-1/4”H

Panel Dimensions:

Switch Panels (All Models):

Switch Type:

Switch/LED Count:

Rocker Switch Rating:

DRY Rocker Switch Output; 2- or 3-position (model dependent);

Black Cap w/ white numeral;

4 or 8 per panel (model dependent)

2 Amp @ 24VDC (resistive)

5"W x 5-1/4”H

Panel Dimensions:

24 mA @ 24VDC

160 mA per 8-position switch module

Switch Panels (*L4E and EA Models only):

Reset Button Switch Rating

Key Lock Switch Rating:

Input Voltage (for LED’s and Alarm Buzzer only):

Input Power (LED’s):

3 Amp @ 30VDC (resistive)

4 Amp @ 28VDC (resistive)

24VDC

80 mA per 4-position switch module

Input Power (Buzzer): 24 mA @ 24VDC

160 mA per 8-position switch module

Switch Panels (*L4E and EA Models only):

Reset Button Switch Rating

Key Lock Switch Rating:

Input Voltage (for LED’s and Alarm Buzzer only):

Input Power (LED’s):

3 Amp @ 30VDC (resistive)

4 Amp @ 28VDC (resistive)

24VDC

80 mA per 4-position switch module

Input Power (Buzzer):

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 7

1.0 INTRODUCTION

1.4 Rocker Switch Types (All outputs are dry outputs

Type “A” - Momentary Switches (2-position)

Closed

Open

Held

Closed

Open

Activated

(While Held)

Normal

(Standby)

Type “B” - Momentary Switches (2-position)

Type “C” - Momentary/OFF/Maintained Switches (3-position)

Type “D” - Momentary/OFF/Momentary Switches (3-position)

Closed

Open

Latched

Open

Closed

Activated

(Latcheduntil pressed back to Normal)

Normal

(Standby)

Terminal

Configuration

Terminal

Configuration

Closed

Open

OpenOpen

Open

Latched

Held

Terminal

Configuration

Normal

(Standby) Activated

(Latcheduntil pressed back to Normal) Activated

(Whiled Held)

Open

Open Open

Open

Closed

Held

Normal

(Standby)

Terminal

Configuration

Activated

(While Held) Activated

(While Held)

Fig 2. TCC/RCC Console Switch Types

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 8

1.0 INTRODUCTION

1.5 Switch Panel Configurations

Note(s):

1. Panel configurations are only available in 4 or 8 switches. All the switches on a panel are the same type (A, B, C or D).

2. Unless otherwise specified, switches are numbered in sequential order. The first, top-left switch is marked “1”, and then they

increase sequentially along the top row. If applicable, the sequence continues on the second row.

3. Switch types A and B are typically best suited for direct release or electrified door locking devices such as Emlocks, Strikes,

Electrified Lockset, etc.

4. Switch types C and D are suited for devices which have separate inputs for “open” and “close” functions, such as overhead

doors, rolling gates, etc. These switches do not provide a circuit path when in the “normal” position.

5. Full Status monitoring and alarm annunciation requires auxiliary relay auxiliary relay control modules. Consult the factory for

assistance in selecting additional control modules to meet the needs of your specific application

Part No Description Image

AL4 Four Momentary Switches with LED's

BL4 Four Maintained Switches with LED's

CL4 Four Momentary/Off/Maintained Switches with LED's

DL4 Four Momentary/Off/Momentary Switches with Leds

AL8-2 Eight Momentary Switches with LED's on 2 panels

BL8-2 Eight Maintained Switches with LED's on 2 panels

CL8-2 Eight Momentary/Off/Maintained Switches with LED's on 2 panels

DL8-2 Eight Momentary/Off/Momentary Switches with LED's on 2 panels

AL8 Eight Momentary Switches with LED's

BL8 Eight Maintained Switches with LED's

CL8 Eight Momentary/Off/Maintained Switches with LED's

DL8 Eight Momentary/Off/Momentary Switches with Led's

AL4E

Four Momentary Switches with LED's, Alarm Shunt, Reset Push

Buttons and Key Lock

BL4E

Four Maintained Switches with LED's, Alarm Shunt, Reset Buttons and

Key Lock

CL4E

Four Momentary/Off/Maintained Switches with LED's, Alarm Shunt,

Reset Buttons and Key Lock

DL4E

Four Momentary/Off/Momentary Switches with LED's, Alarm Shunt,

Reset Buttons and key Lock

EA Panel with Alarm Shunt, Reset Push Buttons and Key Lock

FA Blank Panel

CAB7 Black Cabinet for One RCC (7"H x 20-1/2"W x 14-1/2"D

CAB12

Black Cabinet for Dual RCC (12-1/2"H x 20-1/2"W x 14-1/2"D)

(Accomodates two vertically mounted RCC racks; not shown)

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 9

2.0 CONSOLE HARDWARE DESCRIPTION

2.1 Input/Output Connector Boards

All RCC and TCC Consoles are at the factory. All field wiring will be terminated on the

(I/O) board .One I/O Board is required for every four switches. The numbers on the I/O boards the

numbers the switch

Fig 3. TCC Interior View

TCC x AL4 x EA shown

Reset

Switch**

Pre-wired

Switches

Knockout for

Field wiring

Audible

Shunt**

Key Lock

Switch**

**Reset,

Audible Shunt

and Key Lock

only available

with *L4E or

EA panels

Interconnecting

cable for

multiple I/O

boards

I/O Board

Reset

Switch**

Pre-wired

Switches

Knockout for

Field wiring

Audible

Shunt**

Key Lock

Switch**

**Reset,

Audible Shunt

and Key Lock

only available

with *L4E or

EA panels

Interconnecting

cable for

multiple I/O

boards

I/O Board

P:\INST-INSTRUCTIONS\CONTROL CONSOLES\INST-TCC/RCC REV - 10/20 Page 10

2.0 CONSOLE HARDWARE DESCRIPTION

I/O Board Connectors Function

J1 – J4 Panel Rocker Switches 1-4, respectively

J5 & J6 Blue Interconnection Cable for Multiple Boards

J7 Buzzer (Alarm; Active when RED LED is On)

J8 Reset Button or KeySwitch (one per I/O board)

J9 Audible Shunt Switch

Note: When using multiple I/O boards, the audible shunt switch mayplug into anyJ9

connector. To utilize both the reset button and keyswitch lock, a minimum of two I/O

boards are required

Rocker Switch

Outputs (x4)

Key lock or

Reset Button Switch

LED

Power Input

LED

Inputs

Buzzer (*L4E or EA pannels only)

Fig 4. Input/Output Board Terminals

Fig 5. Input/Output Board Connectors

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SDC Fernbedienung Handbücher

SDC

SDC 707RU Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung