SDI G-Logger 3330 Bedienungsanleitung

MODEL 3330 & 3340

MODEL 3330 & 3340 MODEL 3330 & 3340

MODEL 3330 & 3340 G

G-

-LOGGER

LOGGERLOGGER

LOGGER

DATA ACQUISITION SYSTEM

DATA ACQUISITION SYSTEMDATA ACQUISITION SYSTEM

DATA ACQUISITION SYSTEM

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 1] 16-August-2022

QUICK START GUIDE

M del 3330 G-L gger

M del 3340 G-L gger

v. 22.08.16

 Silic n Designs, Inc.

13905 NE 128

Street

Kirkland, WA 98034

Ph ne 425-391-8329 • Fax 425-391-0446

www.silic ndesigns.c m

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 2] 16-August-2022

TABLE OF CONTENTS

HARDWARE & SYSTEM REQUIREMENTS .......................................................................................................3

INCLUDED CONTENTS ....................................................................................................................................3

FEATURE DESCRIPTIONS ................................................................................................................................3

25-PIN TERMINAL STRIP PIN LAYOUT ...........................................................................................................4

SOFTWARE INSTALLATION .............................................................................................................................5

SDIServer Explained .....................................................................................................................................5

SDIL gger Explained ....................................................................................................................................5

Installing the S ftware .................................................................................................................................5

SDIServer ..........................................................................................................................................................5

SDIL gger .........................................................................................................................................................6

SDIL gger - CONNECT tab ..............................................................................................................................6

G-L gger C nfigurati n ................................................................................................................................6

New ............................................................................................................................................................6

Edit .............................................................................................................................................................6

Pre-C nfigured G-L gger / Use Existing C nfigurati n ............................................................................7

Chip M de Acceler meter Testing ..............................................................................................................7

SDIL gger - ACQUIRE tab ................................................................................................................................7

ACQUIRE/Setup .............................................................................................................................................7

Start Capture .............................................................................................................................................7

Save t File ................................................................................................................................................7

Display File ................................................................................................................................................8

Exp rt .........................................................................................................................................................8

Sample Rate ..............................................................................................................................................8

D wnsample ..............................................................................................................................................8

3340 Settings – Event Detecti n ...............................................................................................................8

3340 STANDALONE SETTINGS ................................................................................................................8

3340 SETTINGS - GPS ...............................................................................................................................9

ACQUIRE/Data ..............................................................................................................................................9

ACQUIRE/Spectrum .................................................................................................................................... 10

ACQUIRE/Meters ........................................................................................................................................ 10

ACQUIRE/Events (3340 Only) ..................................................................................................................... 10

VIEWING EVENT FILES ........................................................................................................................... 10

ACQUIRE/GPS (3340 Only) .......................................................................................................................... 11

VIEWING GPS FILES................................................................................................................................ 11

ENABLING GPS ....................................................................................................................................... 11

SDIL gger - CALIBRATE tab .......................................................................................................................... 12

SDIL gger - SD CARD tab .............................................................................................................................. 13

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 3] 16-August-2022

HARDWARE & SYSTEM REQUIREMENTS

The 33x0 supp rts three channels f input, i.e. up t three 1-axis m dules r ne 3-axis m dule.

The

33x0 is designed t w rk exclusively with SDI acceler meter m dules requiring 8 t 32 V DC p wer and

als has a chip test functi n c mpatible with SDI’s 1521, 1522, 1531, and 1525 surface m unt

acceler meters when c mbined with an EB-J r EB-L test b ard set. It d es n t currently supp rt SDI

m dels 1410, 1527, 2225, 2227, 2012, 2422 r 2422H, as well as ther acceler meter brands.

System requirements t use the 3330 r 3340 G-L gger include:

•Micr s ft Wind ws XP r newer

•Deskt p, lapt p, r n teb k PC

•2 GB available RAM

•50 GB available hard disk space

•Available USB 2.0 r 3.0 p rt

•An internet c nnecti n may be needed during s ftware installati n

INCLUDED CONTENTS

Please check that the f ll wing items are included in y ur b x bef re using y ur G-L gger:

1. SDI M del 3330 f 3340 G-L gger Data

Acquisiti n System

2. SD mem ry card (may be installed in G-

L gger if unit is prec nfigured)

3. 25 Pin terminal strip adapter (may be

installed)

4. USB A t Micr B cable

5. Installati n S ftware (als avail by d wnl ad)

If missing any item, please c ntact supp rt@sili cndesigns.c m.

FEATURE DESCRIPTIONS

The 3330 and 3340 G-L ggers are supplied with a 16 GB SD card and can supp rt up t 32 GB n a SDHC

r SD type mem ry card, r micr -SD mem ry card with an adapt r. The card must be speed class 6 r

higher. Maximum individual file size is 4 GB.

F r supplying p wer nly. Use the Auxiliary P wer P rt if an external p wer s urce is preferred r

necessary

when the 3340 is n t c nnected t a c mputer/lapt p

. S urces can include p rtable battery

packs, a USB cable t car adapter r p rt, r t wall p wer using a USB adapt r.

•The LED flashes when the G-L gger is trying t establish a c nnecti n.

•The LED is s lid when the G-L gger successfully c mmunicates with the h st c mputer.

•Sl w, regularly blinking light indicates data acquisiti n in pr gress.

•Rapidly, irregularly blinking light indicates an err r. Get l g f r details.

•Off means n t acquiring data and n err rs

Inside the unit is a 3-v lt type CR2032c in battery, which retains the cl ck time and l g inf rmati n. It

typically lasts 1 year in the G-L gger. T replace, unscrew the plates and rem ve the lid.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 4] 16-August-2022

25-PIN TERMINAL STRIP PIN LAYOUT

Shield c nnecti n is required.

Alternatively, y u can hard-wire the acceler meter

cables t a 25 Pin Male D-sub (n t included).

N te: There will be n “0 V lt” r “8-32 V” c nnecti ns n PIN 3, 5, 17, r 19 when

c nnecting a 3-axis m dule.

TOP ROW PIN # 1 2 3 4 5 6 7 8 9 10 11 12 13

TOP ROW SIGNAL CH 0

0 V lt

CH 0

AON

CH 1

0 V lt

CH 1

AONY

CH 2

0 V lt

CH 2

AONZ X X X X X X X

BOTTOM ROW PIN # 14 15 16 17 18 19 20 21 22 23 24 25 SH

BOTTOM ROW SIGNAL CH 0

AOP

CH 0

8-32 V

CH 1

AOPY

CH 1

8-32 V

CH 2

AOPZ

CH 2

8-32 V

X X X X X X Shield

3, 5, 17, & 19 n t used w/ 3-Axis X = N t in use

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 5] 16-August-2022

SOFTWARE INSTALLATION

The SDI G-L gger s ftware package c nsists f tw pr grams, SDIServer and SDIL gger. B th

applicati ns must be installed and running f r the G-L gger t functi n and display data. Installati n

sh uld take less than 5 minutes. Y u can als d wnl ad additi nal c pies fr m the SDI website.

SDIServer Explained

SDIServer sh uld be launched pri r t launching SDIL gger. This is a passive pr gram and runs in the

backgr und t supp rt the SDIL gger pr gram’s features. It can als act as a server, transmitting data

t the SDIL gger applicati n via TCP/IP t supp rt rem te access thr ugh the SDIL gger pr gram.

SDIServer must be running n the same c mputer t which the 33x0 is c nnected via the USB cable.

SDIL gger Explained

The SDIL gger pr gram is the graphical user interface f r the 33x0. This is where y u can c nfigure,

view, rec rd, and play back the data y u c llect. The SDIL gger may either be installed n the same

c mputer as SDIServer, r n a different c mputer where rem te viewing is desired.

Installing the S ftware

1) Using Wind ws Expl rer, pen the CD drive r unzip the d wnl ad f lder

2) Click n Setup.exe

3) Click YES t all w the installer t make changes t y ur c mputer

4) Click NEXT n the G-L gger Setup Wizard screen

5) Check b th b xes and click INSTALL

6) Click NEXT t the Device Driver Installati n Wizard

7) Click FINISH t c mplete the Device Driver Installati n Wizard

If y ur PC already has .NET installed, the installer will detect this and pr ceed t step 8. Steps a. thr ugh

d. bel w will nly appear if y ur PC needs .NET installed. In this event, y u will need an internet

c nnecti n t d wnl ad .NET.

a. Click OK t begin .NET framew rk d wnl ad

b. Click OK t install .NET framew rk

c. Check the b x t accept the .NET license terms and click INSTALL

d. Click FINISH t c mplete the .NET installati n

8) Click FINISH t the G-L gger Setup Wizard

SDIServer

Always launch SDIServer prior to launching SDILogger. It must run in the background on the computer

that connects to the 33x0 to provide a server plat orm or the user inter ace.

Ensure y ur G-L gger is c nnected t the c mputer, the acceler meter(s) are wired pr perly, and the

25-Pin Strip is securely c nnected pri r t launching the SDIServer applicati n.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 6] 16-August-2022

SDIL gger

SDIL gger is the graphical user interface f r the 33x0. It c nfigures the acceler meters, c ntr ls the

33x0, displays the data, and pr vides access t saved data streams.

1) C nnect y ur G-L gger by the USB cable and attach the 25-pin adapter with acceler meters.

2) Launch the SDIServer pr gram.

3) Launch the SDIL gger pr gram.

SDIL gger - CONNECT tab

G-L gger C nfigurati n

If y ur G-L gger is prec nfigured by SDI r already c nfigured fr m pri r use, skip t Pre-C nfigured G-

L gger / Use Existing C nfigurati n t maintain that c nfigurati n.

NEW

If y ur acceler meters are new t y ur G-L gger, r y ur G-L gger is brand new but n t prec nfigured:

1) On the C nnect tab, click New and a Device C nfigurati n p p up will pen.

2) Enter a name f r this c nfigurati n f acceler meters, i.e. “Sh wTri .”

3) Leave the IP field as “l calh st” if y ur SDIServer and SDIL gger are running n the same c mputer.

4) Repeat the f ll wing pr cess f r all channels with acceler meters wired n them:

a) Enter a name f r this m dule r axis, i.e. “2470sn222” r “X-Axis” r “left 2210.”

b) Ch se the SDI acceler meter m del # fr m the dr p d wn.

i) A 3-axis m dule will aut -fill the Y and Z axes t channels 1 and 2.

c) Enter the serial number fr m the acceler meter.

d) Sensitivity & Bias will be aut matically p pulated with SDI’s default values f r the M del selected.

If entering the data f r y ur specific m dule, the Sensitivity is als called “Scale Fact r” and can

be f und n the m dule’s bag r sticker n the cable.

e) Maximum and Minimum are aut -filled based up n the g-level f the selected m del.

5) Click Save and the p p up will cl se and save the c nfigurati n t y ur PC.

6) Click C nnect. Y ur 33x0 is n w ready t c llect data.

EDIT

Select EDIT if y u have already used this G-L gger and w uld like t replace the attached acceler meter

r m dify an existing c nfigurati n.

1) If butt n in the t p middle f the CONNECT screen sh ws DISCONNECT, click it t enable the EDIT

butt n, and then click EDIT.

2) M dify the fields f the Device C nfigurati n t the desired values, as described in step 5) f New

C nfigurati n and click SAVE.

If pr mpted, select “Update t New C nfigurati n” t write y ur new c nfigurati n t y ur device.

3) Y ur 33x0 sh uld aut matically c nnect at this p int and is ready t c llect data. If n t, click C nnect.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 7] 16-August-2022

Pre-C nfigured G-L gger / Use Existing C nfigurati n

If this 33x0 device’s settings match th se saved the last time the SDIL gger pr gram was used n this

c mputer, y u will n t see the p p-up. N changes are necessary unless y u wish t change the

acceler meter(s).

If y ur 33x0 came pre-c nfigured fr m SDI with ne r m re acceler meters, the channels will already

have assigned m del numbers and cust m calibrati ns

st red n the 33x0 device

. T retain these

prec nfigured settings, be sure t use Keep Last C nfigurati n in step 2 bel w.

T sync settings fr m the 33x0 t y ur PC, r fr m y ur PC t the 33x0, a p p-up will ask Update t New

C nfigurati n r Keep Last C nfigurati n

1) Ch se Update t New C nfigurati n

a. if it is y ur first time c nnecting t an

unc nfigured

33x0. This writes a new r edited

c nfigurati n fr m y ur c mputer t y ur 33x0 device.

b. t write the saved c nfigurati n last used n this c mputer nt the 33x0, verwriting the

previ us settings st red n the device.

c. D n t use this if it is y ur very first time c nnecting t a

prec nfigured

device.

2) Ch se

Keep Last C nfigurati n

a. t use the

prec nfigured

settings f y ur new 33X0 device.

b. t update the SDIL gger pr gram n this c mputer with the last c nfigurati n st red in this

33x0 device.

3) The 33x0 sh uld aut matically c nnect at this p int.

4) Y u are n w ready t c llect data.

Chip M de Acceler meter Testing

Silic n Designs is the OEM f the actual acceler meter LCCs inside all f its m dules.

T supp rt ther OEMs using SDI’s acceler meter LCCs, the G-L gger has a Chip M de

t supp rt rapid calibrati n and characterizati n f every SDI chip pri r t installati n.

See the full-length User Manual f r m re inf rmati n.

SDIL gger - ACQUIRE tab

The ACQUIRE tab c nsists f six secti ns: Setup, Data, Spectrum, Meters, Events (3340 nly), and GPS

(3340 nly).

ACQUIRE/Setup

The Setup secti n is f r c nfiguring the data c llecti n settings. If necessary, click the STOP CAPTURE

butt n t access AQUIRE/Setup.

START CAPTURE

Click n Start Capture t begin c llecting data, p wer the acceler meter(s), starts data acquisiti n, and

displays the data.

SAVE TO FILE

Save T File is nly available f ll wing an acquisiti n. If unavailable, click St p Capture.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 8] 16-August-2022

Files are aut matically saved t the SD card, and can als be saved t the PC by clicking Save T File.

The m st recently acquired data will be saved t y ur PC as a .bin (binary) file in the direct ry:

C:\users\{username}\D cuments\SDI

DISPLAY FILE

Display File will pen a file previ usly saved t y ur PC. T display a file previ usly st red n ur 33x0’s

SD card, click n the SD CARD tab.

EXPORT

Exp rt will c nvert a previ usly saved SDI G-L gger binary data file t text, CSV, r MATLAB f rmat.

1. Select the s urce binary file y u wish t c nvert and click OK.

2. Select the file type t which y u w uld like t exp rt.

F r additi nal inf rmati n, see the full-length User Manual.

SAMPLE RATE

Turn n r ff the acquisiti n f the active channels by checking r unchecking the b xes. This will n t

rec rd their data streams and save file size. Alternatively, the Data tab pr vides a HIDE functi n t still

c llect the data but hide it during playback.

The 33x0 supp rts up t 10Khz/channel and has a built-in hardware filter at 50% f sample rate. Each

sample is 16-bits. Max file size is 4GB (using up t a 32GB SD card).

Select the minimal sampling rate and number f channels that will give y u the res luti n y ur

applicati n requires t reduce y ur file size and increase the maximum acquisiti n time. When selecting

the sample rate in hertz per channel, if y u are trying t see 1 Hz vibrati n data, increase the sample rate

t 10hz t reduce aliasing.

When ch sing the sampling rate, als take int acc unt that the G-L gger hardware aut matically

applies a l w pass, anti-aliasing filter with a cut- ff frequency that is 25% that f the ch sen sampling

rate. Thus, the sampling rate sh uld be at least 4 times that f the greatest signal frequency f interest.

All the c mpatible SDI acceler meters pr vide an anal g utput, s the signal is effectively a stream.

The COMMENT field will add the entry int y ur saved file headers.

DOWNSAMPLE

D wnsampling is n t rec mmended except in cases where y u are already using the minimal sampling

rate but need t further reduce y ur exp rted file size. F r additi nal inf rmati n, see the full-length

User Manual.

3340 SETTINGS – EVENT DETECTION

The 3340 can identify and rep rt peak events. When enabled, the 3340 will identify events and

aut matically write t a file n the SD card

when rec rding is initiated by clicking

Start Capture

in the

user interface

. T enable event detecti n n a given channel, click ENABLE f r that channel, and pr vide

a thresh ld value, greater than zer , ab ve which an event will be rec rded.

F r further instructi ns, see EVENTS. F r c mplete instructi ns, see the full-length User Manual.

3340 STANDALONE SETTINGS

Available nly with the 3340 G-L gger, the Standal ne Settings are used

when acquisiti n is initiated

an external butt n press n the device itself r by a scheduled acquisiti n

, as pp sed t clicking Start

Capture.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 9] 16-August-2022

The Scheduled Acquisiti ns table all ws c nfigurati n f aut matic, timed acquisiti ns. Click n New t

add an entry t the Scheduled Acquisiti ns table.

1. Set the Start Date and Start Time t y ur desired future starting time.

2. Set the acquisiti n durati n. The maximum durati n depends n h w much space is available n

y ur SD card, as well as y ur acquisiti n data rate, up t a max file size f 4GB.

3. Set the # f Repeats field up t 100 times r until the SD card is full. If this field is zer , this entry

will nly acquire data nce, beginning at the specified start time.

4. Set the Days, H urs, and Minutes t the peri d at which y u w uld like the data acquisiti n t repeat.

5. Click OK t save this entry t the Scheduled Acquisiti ns table, r Cancel t discard.

Y u may have up t 124 entries in the table, where each entry may repeat up t 100 times.

Overlapping entries are n t permitted (a new acquisiti n may n t begin when an acquisiti n is already in

pr gress, regardless f h w the acquisiti n is initiated).

F r c mplete instructi ns, see the full-length User Manual.

3340 SETTINGS - GPS

The 3340 has the pti n t add an external, aftermarket GPS m dule (widely available thr ugh Amaz n

r similar s urces) t c llect GPS data al ng with the acceler meter data.

When installed and enabled in 3340 Settings, the 3340 will rec rd GPS data and aut matically write t a

file n the SD card

when rec rding is initiated by clicking

Start Capture

in the user interface

The GPS data is written t a file n the SD card that shares the same prefix as the ass ciated

acceler meter data file, but with a .GPS suffix instead f a .BIN suffix.

If the 3340 d es n t receive any GPS data f r 90 sec nds, it will st p c llecting GPS data.

Retrieve GPS data by clicking n the SD CARD tab, selecting the desired *.GPS file, and clicking SAVE

FILE TO PC.

F r additi nal instructi ns, see GPS. F r c mplete instructi ns, see the full-length User Manual.

ACQUIRE/Data

Click n Start Capture t begin live data c llecti n and rec rding. Click n Display

File t pen a previ usly saved .bin file.

HORIZONTAL SCALE changes the peri d f time displayed in the wind w (but will n t

affect the sampling rate). A l nger time peri d will c mpact the data, and a sh rter

time peri d will expand the width f the wavef rms f r higher res luti n.

The secti n ab ve the display lists the active channels and their

display c l rs. Clicking HIDE will nly hide a channel’s line n

the display but the data will still be c llected. T view, unhide the

channel and rewind the rec rding.

SCALE G/DIV: Sets the vertical grid f the display. L wer numbers will expand the wavef rms vertically.

OFFSET G: Defaults t 0. Use this t m ve each channel wavef rm vertically t separate r c mbine the

wavef rms.

USER GUIDE - SDI M dels 3330 & 3340 G-L ggers

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Silic n Designs, Inc. • 13905 NE 128th Street, Kirkland WA 98034 • Ph ne: 425-391-8329 • supp rt@silic ndesigns.c m

www.silic ndesigns.c m [page 10] 16-August-2022

ACQUIRE/Spectrum

SPECTRUM displays the FFT f the data. This advanced feature all ws y u t analyze the data by

frequency t see at which frequencies the maximum vibrati ns are ccurring.

AVERAGING PARAMETERS can be set t m dify the FFT with averaging, weighting, and a variable number

f averages. RESTART will refresh the screen and begin c mputing with the data c llected fr m that

p int n.

POWER SPECTRUM MIN and MAX FREQUENCY set the range f frequencies desired f r the display.

The FREQUENCY b xes ab ve the display sh w the l cati n f the tw yell w lines in the display. Y u

can select tw frequencies by dragging the yell w lines with y ur curs r. The AMPLITUDE b xes reflect

the magnitude f the data c llected at the respective selected frequency in units f dBV. The V/ROOT-HZ

displays the difference between the left and right frequencies in v lts per r t-hz. HIDE will rem ve the

channel fr m the display but n t impact the data c llecti n.

The FREQUENCY b xes ab ve the display sh w the l cati n f the tw yell w lines in the display. Y u

can m ve the yell w lines by dragging them with y ur curs r.

The AMPLITUDE b xes reflect the size f the data c llected at the respective frequency.

The G/ROOT-HZ displays the difference between the left and right frequencies.

HIDE will rem ve the respective channel fr m the display. It will NOT impact the data c llecti n.

ACQUIRE/Meters

The METERS screen pr vides DC, RMS, and peak values in either V lts r Gs.

The values are calculated ver the time interval selected by the HORIZONTAL SCALE setting selected n

the Data tab.

The values are updated by that same time interval.

ACQUIRE/Events (3340 Only)

Available nly with the 3340 G-L gger, the 3340 can identify and rep rt peak events based up n user-

defined thresh lds. Events can be simultane usly captured independently n all three channels.

Setup f r Events is d ne in 3340 Settings

3340 Settings3340 Settings

3340 Settings

–

––

–

Event Detecti n

Event Detecti nEvent Detecti n

Event Detecti n.

F r c mplete setup instructi ns, see the full-length User Manual.

VIEWING EVENT FILES

When event detecti n is enabled, the 3340 will identify and write events t the SD Card. The event file

shares the same prefix as the ass ciated acceler meter data file, but with a *.evt suffix instead f a *.bin

suffix.

T access Events, first pen the SD CARD tab, select y ur .EVT file, and click Display File. This will pen

the file n the Events tab and pr vide a list f all the events that met r surpassed the thresh lds entered

in the Setup tab under 3340 Detecti n Thresh lds r Standal ne Settings.

Selecting ne event and clicking n Display Event will then pen the Data display screen. The file data

will aut matically l ad and begin playing in the display wind w. All the display settings, such as scaling,

ffset, and h riz ntal scale, can be m dified t view the data fr m different perspectives. The playback

c ntr ls bel w the display pr vide f rward/pause/play/rewind functi nality f r the event.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung