SDLG LG918 Handbuch
WARNING
Operators and maintenance persons should read this manual
carefully and understand these instructions before use to
avoid serious accident. For the convenience of relevant
people using this manual, it should be easily accessable and
kept in readable condition.
Operation & Maintenance Manual
LG918
WHEEL LOADE
R
SHANDONG LINGONG CONSTRUCTION MACHINERY CO.，LTD
Operation & Maintenance Manual──LG918 Wheel Loader
II
LG918 WHEEL LOADER
Operation & Maintenance Manual
880×1230 mm 16# 6.25pieces
4th Edition in 2008. 9 and 2nd Print in 2009.8
SHANDONG LINGONG CONSTRUCTION
MACHINERY CO.，LTD
Address: Linyi Economic Development Zone, Shandong, 276023
Tel: (+86) 0539－8785688
Fax: (+86) 0539-8785698
Website：www.sdlg.cn
Services Tel：8008607999 4006587999 0539-8785800
Services Fax：(+86) 0539-8785671
Table of Contents
PREFACE ......................................................................................................................................................................I
SAFETY INFORMATION ......................................................................................................................................... III
CHAPTER I SAFETY.................................................................................................................................................. 1
1 SAFETY LABEL POSITIONS AND THE CONTENTS.................................................................................. 1
2 SAFETY RULES..............................................................................................................................................11
3 SAFETY OPERATION.................................................................................................................................... 13
4. STARTING SAFELY...................................................................................................................................... 17
5 SAFETY DRIVING......................................................................................................................................... 20
6 SAFETY OPERATION.................................................................................................................................... 25
7 SAFETY PARKING ........................................................................................................................................ 30
8 SAFETY EXAMINATION AND REPAIR...................................................................................................... 31
9 SAFETY TRANSPORTATION....................................................................................................................... 41
CHAPTER II INTRODUCTION................................................................................................................................ 44
1 GENERAL VIEW OF THE MACHINE & COMPONENTS’NAME............................................................ 44
2 GEOMETRICAL DIMENSIONS.................................................................................................................... 45
3 PRODUCT TYPE AND ITS MEANING........................................................................................................ 46
4 NAMEPLATE.................................................................................................................................................. 46
5 USE CONDITIONS......................................................................................................................................... 47
6 CIRCUMSTANCES REQUIREMENT........................................................................................................... 48
7 FEATURES...................................................................................................................................................... 48
8 TECHNICAL PERFORMANCE & PARAMETER........................................................................................ 49
CHAPTER III OPERATION AND APPLICATION................................................................................................... 51
1 BE FAMILIAR WITH MACHINE.................................................................................................................. 51
2 RUN-IN PERIOD OF NEW MACHINE......................................................................................................... 66
3 OPERATION AND USE OF LOADER .......................................................................................................... 67
CHAPTER ⅣMAINTENANCE ............................................................................................................................. 90
1 MAINTENANCE GUIDE............................................................................................................................... 90
2. DETAILED RULES OF MAINTENANCE ................................................................................................... 91
3 CONTENT OF MAINTENANCE................................................................................................................... 97
CHAPTER V THE STRUCTURE AND PRICIPLE OF MAIN COMPONENTS AND SYSTEM ........................ 101
1 TRANMISSION SYSTEM............................................................................................................................ 101
2 HYDRAULIC SYSTEM ............................................................................................................................... 101
3 BRAKE SYSTEM ......................................................................................................................................... 103
4 ELECTRIC SYSTEM.................................................................................................................................... 104
Operation & Maintenance Manual──LG918 Wheel Loader
I
PREFACE
Thank you for purchasing the wheel loader produced by Shandong Lingong.
This manual is a guideline for users to operate and maintain this machine properly. Keep this manual
within easy access and have all relevant people read it before use. If this manual is lost, damaged or
cannot be read, contact our company or our dealers.
If you sell the machine, be sure to give this manual to the new owners.
Parameters, figures and information included in this manual apply only to basic loaders. For those
derivative products, please consult us or refer to the relative manuals.
When selecting working equipment, please follow the user manual of the working equipment to
assemble and disassemble, replace and use.
In addition, please read carefully the attached technical user manual for the diesel engine and other
functioning parts about operation, use and maintenance.
We are continually striving to improve the quality of our products, to produce more advanced and a
safer engineering machine. We reserve the right, at our sole discretion, to change or modify our
design, but we do not promise to apply the changes to products that are sold. We also reserve the right
to change the data and machine, and the right to maintain it. The design, operation and user
information in this document is subject to change without notice. Customer feedback is very
welcomed. If you would like to comment on any aspect of this manual or our products in general,
please feel free to contact us.
Please give us feed back about the shortcomings immediately upon using our products, so that we can
continue to improve our products to satisfy your requirements.
All rights are reserved. The contents of this publication may not be reproduced in any form, or
communicated to a third party without prior written permission of Shandong Lingong Construction
Machinery Co. Ltd.
Operation & Maintenance Manual──LG918 Wheel Loader
II
△
! WARNING
zThe wrong operation, maintenance and repair could result in injury or death.
zAn operator should read this manual carefully before operation or maintenance. Never
attempt to operate, maintain or repair the machine before reading and understanding this
manual.
zThe operation specifications and precautions given in the manual only apply to intended
uses of the machine. If the machine is used for any unintended purpose that is not
specifically prohibited, ensure the safety of yourself and others before using.
zAny operation and actions which are in conflict with the description in this manual are
prohibited.
Operation & Maintenance Manual──LG918 Wheel Loader
III
SAFETY INFORMATION
Operators should know and obey the safety criteria described in national and local laws. If there is no
such national or local criteria, please follow the rules described in this manual.
Most accidents are caused by the failure to follow fundamental safety regulations for the operation
and maintenance of machines. To avoid accidents, please read, understand and follow all precautions
and warnings in this manual about the machine before performing any operation or maintenance.
Safety precautions are specified in SAFETY of Chapter I.
Safety information described in this manual cannot include safety precautions for every circumstance
that might involve a potential hazard in operation and maintenance. Therefore, if procedures or
actions which are not recommended in this manual are used, the safety of the operator and machine
must be confirmed. Otherwise, consult us or the dealers.
The safety precautions for operation and maintenance in this manual only apply to those conditions
specified by the machine. If the uses of the machine are not specified in the manual, users should
assume full responsibility for their actions. We will not bear any safety responsibility for the operators
or machine.
In any case, you should not engage in prohibited operations as described in this manual.
The following signs are used for identification of safety information in this manual:
△! DANGER── This word is used in safety messages and on safety labels where there is a
high possibility of serious injury or death if the hazard is not avoided. These safety messages or
labels usually describe precautions that must be taken to avoid the hazard. Failure to avoid this
hazard may also result in serious damage to the machine.
△! WARNING── This word is used in safety messages and on safety labels where there is
a potentially dangerous situation. Failure to avoid this hazard may also result in serious injury or
death. Failure to avoid this hazard may also result in serious damage to the machine.
△! NOTICE── This word is used in safety messages and on safety labels for the hazards
that could result in minor or moderate injury if the hazard is not avoided. This word is used for
precautions that must be taken in order to avoid actions which could shorten the life of the
machine.
Operation & Maintenance Manual──LG918 Wheel Loader
1
CHAPTER I SAFETY
△
!WARNING
Read and follow all safety precautions. Failure to do so may
result in serious injury or death.
1 SAFETY LABEL POSITIONS AND THE CONTENTS
Figure 1-1 Figure of safety label position (Domestic Type)
1.1 Safety Label and Its Position
The positions of safety labels of this machine are shown in the figure 1-1 and figure 1-2. Please read
carefully and follow the contents of all the safety labels. Please maintain the labels; when a label
becomes lost, broken or unclear, immediately repair or replace the label. If any component attached
Operation & Maintenance Manual──LG918 Wheel Loader
2
with safety labels is replaced, please make sure the new component has the same safety label.
When cleaning the safety labels, please use cloth, soap and water. Do not use chemical and gas
cleansers.
1.2 The Contents of Safety Label（Domestic Type）
1. Warning for starting
Located above the start button
2.Startforlift
5. Danger of injury or death during steering 6. Notice for antifreeze fluid (if stuck)
Located on the front of
front and rear frames
(Lock the lift arm cylinder before
entering dangerous areas.)
3. Limit position of lift arm 4. Danger of lift arm
Located on both sides of
lift arm
Located on both sides of lift arms
Located on the steering position
of front and rear frames Located on the left side of operator cab door
or mouse of radiator of engine hood
act
on
with a
with a
with a
Operation & Maintenance Manual──LG918 Wheel Loader
3
7. Notice for Hydraulic oil tank 8. Notice for the door of operator cab
9.Noticeforoperation 10.Noticefordriving
11. Notice for high temperature 12. Notice for fuel oil tank
Located on the inner right front
glass the operator cab.
Located on vent-pipe of engine
hood
Located on the inner left front glass
of the operator cab.
Located on the hydraulic oil tank. Located on outside of operator cab left door
Located on the fuel oil tank.
maintains Sitting allowed only in cab.
s
loading.
;
while in operation
Precaution
Operation & Maintenance Manual──LG918 Wheel Loader
4
13. Warning to touch the machine 14. Warning of safety distance
Pay attention to the steam or hot water ejection.
Located on both sides of engine.
(Touch the machine only after all parts stop.)
Located on the both sides of engine hood.
15. Notice of hot water
Located on the cover of en
g
ine water tank.
Inhaltsverzeichnis
Andere SDLG Kompaktlader Handbücher
