Sea Eagle Boats 10.6SR Kurzanleitung
Sea Eagle Transom Boats
8.10YT, 10.6SR, 12.6SR & 14SR
Instruction & Owner’s Manual
For video instructions visit SeaEagle.com/Instructions
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson, NY 11777
1-800-748-8066
September 2012
VIDEO
INSTRUCTIONS
scan this code
or visit
http://sea.gl/vitr
Sea Eagle Guarantee
Congratulations on purchasing a Sea Eagle! With over 40 years of experience in designing, selling and using these quality
inflatables, we’re confident that you are going to love your Sea Eagle and we’re ready to proudly stand behind them.
Sea Eagle Warranty
All Sea Eagle products come standard with a 3 year warranty against any manufacturing defect that begins the date that
your product is delivered. Sea Eagle will refuse delivery on all packages without a valid return authorization number and
will not be responsible for the shipping or handling charges. To obtain a return authorization number, please contact
Sea Eagle directly unless you purchased from an authorized dealer/reseller in which case you should contact them for
more information.
Sea Eagle must inspect equipment in order to determine if there is a defect. In the event that an item must be shipped
back to us for inspection, Sea Eagle will only reimburse the standard return shipping charge through FedEx, UPS or the
U.S. Post Office at published shipping rates. Retail shipping outlets like The UPS Store will not be reimbursed and you will
be responsible for handling and packing charges.
The Sea Eagle warranty does not apply to products that are manufactured by Minn Kota or Torqeedo. These products are
covered by their own, respective warranties. Please refer to the manufacturer’s warranty of each product for details.
If you received an item damaged, please call the shipping carrier to report damaged merchandise. Do not return damaged
merchandise until it has been inspected by the carrier. Sea Eagle will be notified by the carrier when they have completed
their inspection and if necessary, Sea Eagle will arrange for the repair or replacement of damaged merchandise.
Decals, Stickers & Registration
Always contact your state boating authorities for information on boating registration and regulations. Most states require
you to register your boat if you are using a motor.*
Upon registration it may be required to provide the Manufacturer’s Statement of Origin.
Purchases made through an authorized dealer or reseller may require for you to contact them directly in order to obtain
this. You may be charged your own state sales tax if you were not charged sales tax at the time of purchase.
Registered boats generally require for the registration number to be applied to the boat. We do not recommend the use of
decals or stickers as they tend to crack and peel over time with the repeated inflation and deflation of your Sea Eagle.
Instead we suggest applying these numbers to a small piece of hard plastic or marine plywood and hanging it from your
boat like a license plate if permitted by your state. Another method is to apply the numbers to the hull using either PVC
based paint or permanent marker.
*Please note that our Sea Eagle Explorer Kayaks, FastTrack Kayaks, Sport Kayaks and LB-11 LongBoard are not
rated for use with a motor.
Contact Us
Unlike many other companies today we pride ourselves on answering the phone and helping you with any concerns,
questions or special ordering needs that you may have!
Feel free to give us a call at 1-800-748-8066 and we will be happy to talk with you!
Our business hours are Monday to Friday from 9-5 (EST).
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson NY 11777
1-800-748-8066
1
Operating Your Sea Eagle
Motoring
Your Sea Eagle Transom Boat comes equipped with a fiberglass reinforced transom for use with either an electric or gas
motor. These boats are rated by the National Marine Manufacturer’s Association for a motors maximum capacity for both
dry weight and horsepower. Under no circumstance should you equip a motor that exceeds these capacities (whether
they be for the dry weight or the horsepower or both). Not only can this result in damaging your Sea Eagle Transom Boat,
it will also void your Sea Eagle warranty.
Gas motors are measured in units of horsepower and are generally built with power and speed in mind. For the best per-
formance with our Transom Boats we recommend using a 15” short shaft, although a longer shaft can be used in greater
depths of water. With the Rigid Inflatable Keel design in our Sport Runabout Transom Boats you can easily get your
Sea Eagle to plane (provided you are using a 9.9HP or higher).
Traditional electric motors are measured in units of thrust (the pulling or pushing power of a motor) and are slower and
quieter on the water than gas motors. There is no direct correlation of thrust to horsepower although most consider tradi-
tional electric motors to be about a 1HP (which is more of a guess than an approximation).
Advantages of having an electric motor over a gas is that they are lighter to transport and easier to maintain. In order to
operate an electric motor you will need a 12V deep cycle marine battery. Other suggested accessories are a battery
charger and a battery power center to house the battery itself.
The Torqeedo Travel 1003s electric motor is unlike any other electric motor on the market today. Powered by a waterproof
lithium ion battery (battery charger included), the Travel 1003s delivers the true 3HP performance of a gas motor!
Features include on board computer display, GPS and an audible alarm when the battery reaches 30%.
Torqeedo electric motors are lighter to transport than gas motors and do not require a heavy 12V battery like traditional
electric motors. You can also power your Torqeedo Travel 1003s using the new Sea Eagle Solar Canopy which is com-
prised of a PowerFilm Solar Panel.
Minn Kota, PowerFilm & Torqeedo products come with a manufacture warranty and are not covered by the
Sea Eagle warranty. All warranty work is handled directly by the respective manufacturer and all sales on these
products are final.
Rescue Applications
Although the Sea Eagle Transom Boat is made primiarly with leisure and recreation in mind, they are tough and durable
for other applications. Sea Eagle Transom Boats have been sold to hundreds of fire departments and rescue operators for
over several decades. From flood work in Bombay to Lake Michigan, rescue professionals put their faith in Sea Eagle.
Rowing
Although our Transom Boats are designed with the use of a motor in mind, they can easily be rowed using the included
oars and oarlocks. We always recommend having them on board in case of emergency or engine failure.
Towing
In order to tow your Sea Eagle Transom Boat as a tender, tie the provided tow line to each D-Ring on the outside bow of
your boat and then pull the center of the tow line through the bow carry handle. This method is described as a bridle sys-
tem and will distribute the force of towing across the hull. DO NOT tie the line directly to the bow carry handle as it is not
designed for towing. When towing it is recommended to empty your Transom Boat of accessories, gear and motors.
Water Skiing
Our larger Sport Runabout models 12.6SR RIK and 14SR RIK come equipped with stainless steel eyebolts and pre-drilled
holes in the transom for water skiing. For this application it is recommended that you use a 15HP to 20HP gas motor or
higher.
2
Safety
In a manual of this type it is impossible to give adequate space to the topic of water safety. For further information on
boating safety, visit USCGBoating.org or enroll in one of the excellent water safety courses provided.
It is your responsibility to be aware of and comply with all relevant safety regulations. For all water recreation or sport you
should have a reasonable swimming ability. Just as swimmers have a cardinal rule about not swimming alone, it is
strongly advised that you should never go boating alone.
Boating Safety Tips
• Always wear a USCG approved PFD (life vest) at all times while on the water.
• Be aware of your local boating rules and regulations and abide by them accordingly.
• Check inflation levels each time before you go out and inflate your boat for a full 24 hours before undertaking long trips.
• DO NOT allow children to use Sea Eagle unsupervised.
• DO NOT consume alcohol while boating or operating a boat while under the influence of alcohol or drugs.
• DO NOT drag your Sea Eagle over rocks or gravel if it can be avoided.
• DO NOT exceed the certified maximum capacities of this boat under any circumstance.
• DO NOT go boating alone.
• DO NOT use compressors, co2 or compressed air for inflation, only use Sea Eagle recommended pumps.
• DO NOT use your Sea Eagle Boat as a personal flotation device as they are designed for leisure/recreation in mind.
• DO NOT sleep inside of your Sea Eagle while on the water.
Safety Equipment
The type of water conditions you are on should determine the type of safety equipment that you should have on board.
For all types of boating we strongly recommend that every passenger wear a USCG approved PFD (personal flotation de-
vice) like a life vest. In most places this is a requirement by law, but from our point of view it is also an exercise of good
judgment to have a PFD for all passengers. Other important items to consider for all types of boating…
Drinking Water & Snacks: Kayaking is a physical activity that can work up both a thirst and a sweat and especially on a
hot or warm day it is a good idea to have drinking water readily available to you to prevent dehydration. Bring a good
amount of water for all passengers as you want to avoid drinking the water you’re kayaking in which may be full of con-
taminants.
Extra Clothes/Layers: You never know when the weather can change and it’s a good idea to come prepared with extra
clothing. If you have a dry (waterproof) bag than we recommend storing them inside so they’re not damp in case of emer-
gency.
First Aid-Kit: The contents of the kit may vary depending upon your preferences, but make sure to carry a kit that reflects
the possible dangers for the conditions you are in.
Foot Pump/Repair Kit: Although our boats are both durable and rugged, it may be possible that you need to make a repair
while on the water in which case you’ll need the repair kit and the foot pump to re-inflate the boat. If this is your first repair,
you may also want to bring this instruction manual with you.
Sun/Rain Protection: A hat can protect both your face and head from the rain or sun. You may also want to carry sun-
screen with you as both the sun and the sun’s reflection from the water can do serious damage to your skin. If you are out
for prolonged periods of time you may need to reapply sunscreen as needed.
Whistle: Having a whistle readily available to you in case of emergency is a great way to attract the attention of others if
assistance is needed.
3
Inflation Valves & Pumps
Recessed Air Valves
Remove the cap and
press and turn the valve
stem counterclockwise
so that the stem is in
the UP position. Only
when the stem is in this
position the valve will
retain air. Turning the
stem clockwise will put
the valve in the down
position for deflation.
Foot Pumps
Press the two halves of
the foot pump together
and connect the hose to
the inflation port marked
OUT. Insert the valve
adapter at the other end
of the hose. Please note
the A-50 foot pump has
two settings. One for
high volume and the
other for high pressure.
A-50 Foot Pump
A dual chamber foot
pump which has two
settings, high volume
for the main chambers
and high pressure for
the drop stitch inflatable
floor and the keel. The
A-50 is included with
models featuring the
drop stitch floor.
A-50 (high volume)
When the black cap is
inserted into the center
of the A-50 the pump is
in the high volume set-
ting. Use this setting to
inflate main chambers
of the boat to 3.2 PSI.
Inflation Valves & Pumps
A-50 (high pressure)
When the black cap is
removed from the cen-
ter of the A-50, the
pump is in the high
pressure setting. Use
this setting to inflate the
drop stitch inflatable
floor and the rigid inflat-
able keel to 7 PSI.
Recessed Adapter
The recessed valve
adapter is located inside
of the orange repair kit
canister. Insert the
ribbed end of the valve
adapter into the hose on
the foot pump. This
valve adapter is not
compatible for use with
electric pumps.
Before inflationg make
sure that the stem in-
side of the valve is in
the UP position so that
the chamber retains air.
Insert the valve adapter
and turn clockwise to
lock into position. When
the pressure (3.2 PSI) is
reached you should feel
resistance on the foot
pump.
4
BTP Turbo
(OPTIONAL)
The BTP Turbo electric
pump comes complete
with a nylon shoulder
carry bag, 12V DC
power supply, hose and
adapters.
Included are a cluster of
seven valve adapters,
with raised numbers on
each arm of the cluster.
The adapter marked
number 1 is the only
adapter needed for your
Sea Eagle.
Take adapter number 1
from the cluster and
firmly push it into the
grey joint that is already
connected to the end of
the hose. To ensure that
the adapter is on as
tight as possible, push it
against a hard surface
like a floor or table once
it is connected.
Connect the other end
of the hose to the red
inflation port at the top
of the pump, located
near the ON and OFF
buttons.
Adjust the pressure dial
to read 3.2 PSI which is
the operating pressure
of your Sea Eagle. PSI
is marked in red on the
dial. Never turn the dial
when the device is
under pressure as this
will immediately cause
the instrument to break.
Connect the cord at the
end of the power supply
into the end of the cord
attached to the pump.
Connect the Turbo
Pump to a 12V battery
(car or marine) using
the alligator clips at the
end of the extension
cord. Connect the red
clip to the positive pole
and the black clip to the
negative pole.
If you ordered the Turbo
Pump Kit you can also
connect the pump to the
portable battery in place
of the alligator clips.
5
Assembly & Inflation
To charge the portable
battery, plug it into the
charger and then plug
the charger into a
household electrical
outlet. The light on the
battery charger will blink
red until fully charged.
When it is fully charged
the light will be a solid
green.
It is recommended to
keep the Turbo Pump
inside of the carry bag
to make transportation
easier and to protect the
pump from sand which
could jam it. The carry
bag comes equipped
with compartments for
the pump, battery and
charger.
Press the ON button to
begin inflation. The
pump operates in two
stages which can be
identified by the noise of
the turbine at the start,
followed by the piston.
The pump automatically
stops once the pressure
is reached.
Air compressors that
are designed for other
uses like tire inflation
(usually around 50 PSI)
can easily harm your
Sea Eagle which works
at a much lower pres-
sure of 3.2 PSI. For this
reason we recommend
only using Sea Eagle
pumps.
Assembly & Inflation
Clear a clean and flat
space that is free of any
sharp objects and unroll
the boat hull so that it is
laid out flat.
Locate the recessed
one-way valves in the
bow of the boat and
begin inflating the boat
to about 10% to 20% of
its capacity. By partially
inflating the boat the
hull material is out of
the way and the floor-
boards will be easier to
install.
Drop Stitch Floors
The 8.10 YT and the
10.6SR RIK feature a
high pressure drop
stitch floor and come
equipped with the A-50
high pressure foot pump
necessary for inflating
the floor up to 7 PSI.
Once installed, drop
stitch floors do not need
to be removed.
The drop stitch floor on
the 10.6SR RIK also
features an aluminum
support crossboard in
the bow, slide fittings
that attach to fittings at
the base of the transom
and a fabric guard with
strap to secure a fuel
tank.
6
Place the floor inside of
the boat with the air
valve located in the bow
of the boat, facing up.
Begin inflating the floor
using the high volume
setting on the A-50.
When resistance is met
switch over to the high
pressure setting and fin-
ish inflating the floor
until resistance is met.
Position the floor for the
10.6SR RIK so that it is
located just behind the
air valve for the outside
drop stitch keel. Inflate
the floor first and the
keel second. Once the
floor is inflated set the
A-50 back to the high
volume setting and fin-
ish inflating the main
chambers on the hull.
Plastic Floorboards
Our Sport Runabouts
feature an interlocking
polyethylene floorboard
which are high strength
and maintenance free.
The top of these boards
are textured for traction.
The underside of these
boards are smoothed
and numbered.
If you have either the
12.6SR RIK or 14SR
RIK than you will need
to attach the reinforce-
ment kit to floorboards
marked FB-2 and FB-4
before you install the
floorboards into the
boat. This is a one-time
only assembly.
The FB-2 has two
threaded brass inserts
for the reinforcement
board and four others
for (optional) steering
console. Secure the
board to the smoothed
underside of the FB-2
using the screws and
washers. Use a Phillips
head screwdriver to
tighten the screws.
Locate and attach the
two reinforcement bars
to the traction (top) side
of the FB-4 using the
threaded brass inserts
and the knurled knobs.
The reinforcement kit
lends additional support
to the transom for better
performance with high
powered gas engines.
Each of our Sea Eagle
Sport Runabouts utilize
different floorboard
pieces and stringers al-
though the assembly for
them remains the same.
10.6SR RIK
FB-1, FB-2, FB-3 (short) & FB-4
Qty 2. STR80 Stringer (80 cm/31.5”)
Qty 2: STR45 Stringer (45 cm/17.71”)
12.6SR RIK
FB-1, FB-2, FB-3 & FB-4
Qty 2. STR124 Stringer (124 cm/49”)
Qty 2: STR37 Stringer (37 cm/14.5”)
14SR RIK
FB-1, FB-2, FB-3, FB-3 (short) & FB-4
Qty 2. STR14L Stringer (124 cm/49”)
Qty 2: STR14S Stringer (80 cm/31.5”)
Sea Eagle’s floorboard and stringer system is designed to
be snug inside the boat. Although installation can be done
by one person, it also requires some patience and practice.
Use the tips provided to make the job easier.
7
CAUTION!
Please do not proceed
with bare feet and make
sure to keep fingers and
toes out of the way so
that they do not get
pinched during floor-
board installation.
Insert the FB-1 into the
bow of the boat. Lift the
sides of the boat as
necessary in order to
slide the FB-1 into
place. At this time it
does not need to be
fully inserted.
Next, insert the FB-2
and interconnect its
edges with the FB-1.
The recessed air valve
for the keel should be
partially visible through
the cutout in the FB-2.
Aft of the boat (at the
rear) insert the FB-4
and slide it underneath
the transom lip. Exact fit
is not critical at this
point as the board will
be pushed into place
when all floorboard
pieces have been in-
stalled and pressed
down.
Insert the FB-3 so that it
meshes with the FB-4
and overlaps the FB-2.
Lift the ends of the FB-2
and FB-3 and connect
them to form an in-
verted V. Apply pres-
sure to the joint to
secure the floorboards
into place.
The 14SR RIK features
the FB-3 and FB-3 short
which are both marked
as FB-3. Insert the FB-3
so that it meshes with
the FB-4 and overlaps
the FB-2 and install the
FB-3 short should be in-
stalled between the FB-
3 and FB-2 floorboards.
Stringers
Stringers are featured
on each of the insides
of our Sport Runabouts
and add rigidity to the
floorboards. Each
model includes both a
larger and smaller
stringer set.
To make installation
easier, get the boards
on the same plane by
propping the bow of the
boat with either a box or
bucket and place one of
the longer stringers
under the boat. This
provides a flat surface
for the installation of the
first stringer.
8
Place the longer
stringer in the rear of
the boat between the
hull and the notched
edge of the floorboards
with the groove on the
stringer ready to accept
the edge of the floor-
board. Make sure there
is enough room for in-
stallation of the shorter
stringer and insert.
Once both stringers are
installed, repeat this
process for the opposite
side. The second set of
stringers should be eas-
ier to install with the first
set holding the boards
in alignment. Once fully
inflated the stringers
and floorboards will fit
firmly into place.
Aluminum Bench Seat
Transom Boats come
equipped with a bench
seat and two sets of
fabric beads (back and
front) to secure the
bench seat to. Your boat
should be around 50%
inflated before installing
the bench seat. Please
note the second bench
seat is sold separately.
Begin by feeding the
fabric beads on the pon-
toons through the nylon
slotted fittings under-
neath the aluminum
bench seat. Slide the
seat over the fabric
beads so that the seat
is toward the center.
With the floorboard in-
stalled and the seat in
place, you are now
ready to fully inflate the
main air chambers of
the boat to 100%. If you
are using an electric
pump, remember to set
the pressure to 3.2 PSI
before you begin.
NOTE: Inflate the rigid
inflatable keel as much
as possible with the foot
pump until resistance is
met. The rigid inflatable
keel greatly improves
steering performance,
the structural strength of
the boat and softens the
impact of the ride when
going through waves.
Oars & Oarlocks
Assemble the AB25-5
oars by snapping them
together. There are
pre-drilled holes in the
middle of the oars so
you can slide it over the
oarlock and then secure
the oar in place using
the blue oar stopper.
Transom Drain Valve
Make sure that your
drain valve is always in
the closed position
(shown) while on the
water. When you are
motoring is the only
time that the drain valve
can be in the opened
position.
9
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Sea Eagle Boats Boot Handbücher
Sea Eagle Boats
Sea Eagle Boats NeedleNose NN116 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats FishSkiff 16 Bedienungsanleitung
Sea Eagle Boats
Sea Eagle Boats SE-330 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats FishSkiff Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats LongBoard SUP LB11 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats SE-8 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats NeedleNose NN126 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats SE-330 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats 285 FPB Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats FoldCat 375FC Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats SUPCat10 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats Explorer 300x Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats PackFish7 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats 285 FPB Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats Fishing Explorer 350fx Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats 300 Series Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats FastCat12 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats SE-330 Kurzanleitung
Sea Eagle Boats
Sea Eagle Boats Fish-n-Troll Kurzanleitung
Beliebte Boot Handbücher anderer Marken
Raymarine
Raymarine ST70 Instrument Bedienungsanleitung
Pro-Line Boats
Pro-Line Boats Pro Line 19 Sport Bedienungsanleitung
Jeanneau
Jeanneau CAP CAMARAT 8.5 CC Bedienungsanleitung
Tiara Yachts
Tiara Yachts C49 2024 Bedienungsanleitung
Monterey Boats
Monterey Boats Sport Yacht 330 Bedienungsanleitung
J
J 105 Bedienungsanleitung
PURSUIT
PURSUIT OS 335 Bedienungsanleitung
Boston Whaler
Boston Whaler CONQUEST 345 Bedienungsanleitung
Jeanneau
Jeanneau SUN ODYSSEY 41 DS Bedienungsanleitung
Meridian
Meridian 490 Pilothouse Bedienungsanleitung
Advanced Elements
Advanced Elements AdvancedFrame Expedition AE1009 Bedienungsanleitung
Robo Marine Indonesia
Robo Marine Indonesia GEOMAR Bedienungsanleitung
