SEA Wi-Fi Com Bedienungsanleitung
1
Installation Instructions for
SEA Wi-Fi Com
Do NOT give this manual to end user!
Manual Version 1
The manufacturer cannot legally offer technical support to non-
qualified gate or door installers. End users should employ the
services of a professional install company to commission or
support this product!
2
SEA Wi-Fi Com
Specs:
•Communicate with visitor from anywhere in the world
•Use your phone as entry credential
•Rugged weatherproof, vandal resistant, stainless steel
enclosure
•2 relays output
•Standard gooseneck and surface mount options
3
Index
4Site Survey
5 WiFi Setup
12 Answering on Android
13 Answering on Apple
15 LAN setup
16 Installation
17 Power
18 Intercom Module Wiring
18 Keypad Module Wiring
19 Output Connections Example
19 Adding Additional APP Users
21 Other Settings
22 Sounds, Volume & Speech
23 Using the APP
24 Keypad Programming
27 Using the Keypad
27 Troubleshooting
30 Revision Changes
4
Site Survey
WiFi
Mbs
Slow Fast
YES!
I have some wifi signal at the gate with my
phone! If not, STOP. You will need some form
of wifi extender, or repeater, or LAN/CAT5
cable!
YES!
I have at least 1 Mb UPLOAD speed. If not
STOP! This system may operate intermittently
remotely or have delayed PUSH notifications.
YES!
My wifi Internet Security is WPA or WPA2 or
better.
YES!
My wifi network supports 802.11 b/g or n
(2.4g frequency networks). Note: This device
cannot run on “a” or “s” type networks (these
are 5G frequency).
SSID
1:____
2:____
3:____
YES!
The network I am trying to connect to is a
single network without duplicate SSID
networks of the same name.
5
WiFi Setup
Step 1
Step 2
Do not install the
intercom. Power it up
beside the router so that
you can perform the
configuration with the
homeowners phone
beside the intercom and
router.
Download and install the
app on the end-user’s
phone.
Search for wifi PRO 2 and
find the icon, or scan the
QR code if the phone has a
QR scan app.
Tip: Be sure to accept ALL
permissions during install,
otherwise you will
experience problems later!
3-4 feet / 1 metre
6
Step 3
Open the intercom and connect antenna.
Step 4
Connect 24v DC power with the power supply provided.
Architectural or “Portrait” oriented models
will have security screws at the top. Loosen
only these with the security screwdriver
provided.
Loosen top screws
Landscape
Pedestal Style
7
Step 5
Step 6a
Step 6b
Press and HOLD the code button for more than 3 seconds. A tone
will be heard.
The intercom will now begin to transmit its own wifi network
called BELL-XXXXXX (where XXXXXX is the 6 numerical digits
from the serial ID number).
>3 seconds
With the user’s phone, search for available wifi networks and
connect to the BELL network.
TIP: Your phone needs to be within range of the intercom to detect
this network.
Wifi passcode
Enter the default pass code 123456789 and the users phone should now
be connected directly to the intercom.
Press CONNECT on android devices and DONE on apple devices.
8
Step 7a, 7b, 7c
Step 7d, 7e
After pressing
SEARCH, the APP
will now search for
the intercom and
should detect it.
Intercom ID will be auto filled.
Enter “admin” for the main
user.
Enter “123456789” as the
default password and press
the TICK as shown.
9
Step 8
Step 9a, 9b, 9c, 9d
Note: The intercom and phone are directly connected in a point to
point link. Although we know the intercom is fully operational, we
now need to connect it to the local wife network.
Press the Video icon to view
live video.
Note: at close proximity, you
will experience acoustic
feedback. This is normal.
TIP: If you can view live
video, and hear acoustics,
then this proves that the
intercom hardware is
working as it should.
Should be showing ONLINE
status.
10
The intercom is now searching the area for wifi networks and will
display all compatible networks on the App screen.
Step 9e, 9f, 9g
Step 10
Enter the WIFI PASSCODE for the network
which you are connecting to.
WARNING: Take care not to enter a typing
mistake. The intercom will accept any wifi
password and will not know if it is correct or
not!
Wifi Signal strength must be at least 25%, or
you will have problems!
Wait 60 seconds.
The intercom will now
re-boot and attempt
to connect to the wifi
network with the
password you have
entered.
60 secs..
If you can see live video
and hear audio, the
intercom has successfully
connected to the
network.
If for some reason this
does not work, try
connecting to the wifi
network again and
double check the wifi
password is correct.
Inhaltsverzeichnis
Andere SEA Gegensprechanlage Handbücher
