Seac PARTNER Bedienungsanleitung

PARTNER

www.seacsub.com

MULTIPURPOSE

FREEDIVING

WATCH

All manuals and user guides at all-guides.com

all-guides.com

All manuals and user guides at all-guides.com

PARTNER

MULTIPURPOSE FREEDIVING WATCH

Congratulations on your purchase of a Partner Seac multipurpose diving watch.

Check www.seacsub.com for any updates to this manual.

GENERAL WARNINGS

• WARNING! Read this entire manual before using your SEAC multipurpose watch.

Incorrect use will void the warranty and could cause permanent damage to

the instrument.

• WARNING! Freediving entails risks of syncope, taravana, pulmonary edema,

and hemoptysis; even a careful reading of this manual cannot exclude

potential dangers underwater.

Anyone who does not understand or knowingly accept these dangers must

not dive with a SEAC instrument.

ICONS

Diving Depth Temperature

Stopwatch Countdown Timer

World Time EL Backlight

Chime

5 Alarms

100 Year Calendar Pacer

100

100M Water Resistant Battery (CR2032)

All manuals and user guides at all-guides.com

BUTTONS

The function of each button is shown below.

A- Reset / Stop

B- Mode

C- EL backlight /

D- Start / Split 1 / +

DISPL AY

The screen is shown in below:

Year Date

Diver attention

symbol Chime

Stopwatch Alarm

Timer Seconds

Hour Low power

indicator

Minutes Daylight saving

time

Dive

Day of week

All manuals and user guides at all-guides.com

PARTNER

LOW POWER

lf the battery level is too low, the

symbol will display until a new

battery is installed.

MODE SELECTION

• Press “B” to change the mode in the following sequence:

Timekeeping Mode Diving Mode Record Mode Alarm Mode

Countdown Time Mode World Time Mode Pacer Mode Stopwatch

Mode.

• Alarm mode, countdown timer mode, world time mode, and pacer mode can

be set ON/OFF under the time mode setting (See Page 6).

TIMEKEEPING

• Hour, Minutes, Seconds, Year,

Month, Date, Day of the week;

• 12/24H Format;

• 100-year calendar (2000 - 2099).

DIVING

• Maximum diving depth: 100 m or

330 ft;

• Maximum time for a single dive:

59’59”;

• Temperature range:

-9.9 - 60.0°C or 14.2 - 140°F.

All manuals and user guides at all-guides.com

RECORD

• Depth, Temperature, Dive time,

Surface time;

• 30 records (R01 - R30);

• PARTNER can store dive data

99times (F01 - 99) max.

ALARM

• 5 alarms;

• Chime.

In Alarm mode, the screen on the

right appears automatically after 2s.

COUNTDOWN

• Countdown timer range:

99:59’59” - 0’00”00

WORLD TIME

• The time in another time zone.

PACER

• 18 pacer settings (10 - 320).

All manuals and user guides at all-guides.com

all-guides.com

PARTNER

STOPWATCH

• Units in 1/100 second;

• 8 Laps, Splits;

• Measurement range:

0’00”00 - 99:59’59”.

TIMEKEEPING

TIME SETTING

1. In timekeeping mode, press and

hold “A” until the city code starts

flashing (flashing shown in setting

mode);

2. Press “C” or “D” to select the city

code; press and hold to scroll

quickly;

3. Press “B” to select Daylight Saving

Time;

All manuals and user guides at all-guides.com

4. Press “C” or “D” to switch Daylight

Saving Time ON/OFF.

5. Repeat step 3 and 4. The selection sequence is as follows:

City code Daylight Saving Time Seconds Hour Minutes

12/24H Format Year Month Date M-D/D-M Format Key

Tone (ON/OFF) Alarm (ON/OFF) Timer (ON/OFF) World

Time (ON/OFF) Pacer (ON/OFF);

6. Press “A” to exit setting mode when

you have finished. (The day of the

week is automatically displayed in

accordance with year, month and

date setting).

• When the key tone (BEEP) is set

to “OFF”, buttons will not make a

sound when pressed.

• Press “B” to change the mode.

The corresponding mode function

will be OFF when the alarm,

countdown, world time, or pacer

are set to “OFF”.

All manuals and user guides at all-guides.com

PARTNER

DIVING

SETTING DIVE PARAMETERS

1. In dive mode, press and hold “A”

until the temperature and depth

units begin flashing (flashing in

setting mode);

2. Press “C” or “D” to select Metric /

Imperial;

3. Press “B” to move to the next

selection;

4. Press “D” to increase the number

or press “C” to decrease it. Press

and hold to scroll quickly;

All manuals and user guides at all-guides.com

5. Repeat steps 3 and 4. The selection sequence is as follows:

Unit Safe dive depth Safe dive time (minutes, seconds);

6. Press “A” to exit the setting mode

when you have finished.

• Safe dive depth range: 0.0, 3.0 –

100 m or 0, 10 – 328 ft, default is

0.0 m or 0 ft.

• Safe dive time range: 0’00” -

59’59”; default is 0’00”.

FREE DIVING

Dive time

Surface time

1. Diving depth can be measured in

dive mode.

2. Dive time starts when the

diving depth exceeds 1.2m or 4ft

(“ “ flashing);

3. Surface time turns on when the

user exits the water;

4. Repeat steps 2 and 3. You can measure multiple times (maximum 99 dive times).

All manuals and user guides at all-guides.com

Andere Handbücher für PARTNER

Inhaltsverzeichnis

Andere Seac Tauchinstrument Handbücher

Seac

Seac guru Bedienungsanleitung

Seac

Seac KS01 Bedienungsanleitung

Seac

Seac R30 Bedienungsanleitung

Seac

Seac DRIVER Bedienungsanleitung

Seac

Seac guru Bedienungsanleitung

Seac

Seac JACK Bedienungsanleitung

Seac

Seac GUUN 30 Bedienungsanleitung

Seac

Seac APNEA HR Bedienungsanleitung

Seac

Seac JACK Bedienungsanleitung

Seac

Seac BCD MODULAR Bedienungsanleitung

Seac

Seac ACTION Bedienungsanleitung

Beliebte Tauchinstrument Handbücher anderer Marken

Sherwood

Sherwood Amphos Bedienungsanleitung

Zeagle

Zeagle N2ition Bedienungsanleitung

Tusa

Tusa Q 1203 CE Leitfaden

Sherwood Scuba

Sherwood Scuba Insight Montageanleitung

SUBMERSIBLE SYSTEMS

SUBMERSIBLE SYSTEMS Spare Air 600 Bedienungsanleitung

OCEANS

OCEANS S1 Supersonic Bedienungsanleitung

heinrichs weikamp

heinrichs weikamp OSTC 2 Bedienungsanleitung

Omer

Omer SP2 Bedienungsanleitung

Scott

Scott PRO-PAK Bedienungsanleitung

Apeks

Apeks BLACK SAPPHIRE Bedienungsanleitung

Waterproof

Waterproof DRYSUIT Bedienungsanleitung

Dräger

Dräger PAS AirPack 1 Bedienungsanleitung

Dive Lab

Dive Lab KIRBY MORGAN KMB 18 Bedienungsanleitung

Ratio Computers

Ratio Computers iDive Bedienungsanleitung

Oceanic

Oceanic PROPLUS X Bedienungsanleitung

CFA

CFA MSA G1 Bedienungsanleitung

Genesis

Genesis Centauri Bedienungsanleitung

TREND

TREND GAUGE/60 Bedienungsanleitung