Seagate MEDALIST 17240 ST313030A Bedienungsanleitung
......................................
Medalist 17240 (ST317240A)
..... . ..... . ............. . ..... . .....
Medalist 13030 (ST313030A)
.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. .
Medalist 10231 (ST310231A)
.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. .
Medalist 8420 (ST38420A)
.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. .
Medalist 4310 (ST34310A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Guide
..... . ..... . ............. . ..... . .....
-2 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
© 1999 Seagate Technology, Inc. All rights reserved.
Publication Number: 21200130-001, Rev. B, June 1999
Seagate, Seagate Technology, the Seagate logo, Medalist and
the Medalist logo are registered trademarks of Seagate Technol-
ogy, Inc. DiscWizard, SeaFAX, SeaFONE, SeaTDD and Sea-
BOARD are either trademarks or registered trademarks of
Seagate Technology, Inc. or one of its subsidiaries. All other
trademarks or registered trademarks are the property of their
respective owners.
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B -1
Contents
The easiest way to install your drive.................................... 1
What you need........................................................................ 2
Before you begin .................................................................... 2
Handling precautions............................................................. 3
Master/slave jumpers............................................................. 4
Attaching cables and mounting the drive............................ 6
Configuring your computer................................................... 9
Addressing drive-capacity limitations................................ 11
Partitioning and formatting your drive............................... 14
Installation using Disk Manager........................................ 15
Windows 95 or Windows 98 installation ........................... 16
Standard DOS installation ................................................ 17
Additional installation options............................................ 19
Non-ATA compatible slave jumper...................................... 19
Cable select jumper ............................................................. 20
Advanced Disk Manager options........................................ 21
Troubleshooting ................................................................... 24
Alternate capacity jumper................................................. 26
Seagate Technology support services............................... 32
Storing and shipping your drive......................................... 39
iii
0 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
iv
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B 1
The easiest way to install your drive
DiscWizardis Seagate’s exclusive Win-
dows program, provided on a diskette, that
makes it easy to install your Medalist
drive.
DiscWizard helps you configure your new
drive and your computer. It analyzes your
system, lets you select various installation options and creates
customized step-by-step instructions. It also allows older com-
puters to access the full capacity of large hard drives.
You can run DiscWizard to install your new hard drive if:
•You already have an existing, bootable hard drive in your com-
puter with at least 3 Mbytes of available disc space,
and
•You are running Windows 95
or Windows 98.
If you can run DiscWizard, follow the instructions on the
DiscWizard diskette to install your drive. If you need additional
information, refer to this installation guide.
If you cannot run DiscWizard, follow the instructions in this
installation guide to install and configure your new drive.
2 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
What you need
•Straight-edge and Phillips screwdrivers
•Four 6-32 UNC drive mounting screws
•An ATA interface cable (max length: 18 inches) with
available 40-pin connector
•An unused drive power cable for your new drive
Before you begin
•Make sure your computer is turned off before you open the
case.
•Read the handling precautions at the right and inspect the
drive to make sure that it is not damaged.
•Save your foam-lined Seagatedisc drive box. This box has
been approved by Seagate for shipping a Seagate disc drive.
Using any other container or packing material voids your drive
warranty.
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B 3
Handling precautions
Disc drives are extremely fragile. Do not drop or jar
your drive.
Keep the drive in its antistatic bag until you are
ready to install it.
Protect your drive from static discharge by making
sure you are well grounded before touching the
drive. We recommend wearing a grounded wrist
strap throughout the installation process. Do not
touch the connectors or any part of the printed cir-
cuit board.
Always handle the drive by its edges or frame.
Do not apply pressure or attach labels to the circuit
board or the top of the drive.
4 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
Master/slave jumpers
If your new Seagatedrive will be the only drive in your computer,
you do not have to change any jumper settings. In this case, skip
ahead to “Attaching Cables and Mounting the Drive,” on page 6.
If you already have one hard drive in your computer and you are
installing a second drive, you must configure one drive as a mas-
ter and the other as a slave.
To configure the drive as a master or one drive only:
•Place a jumper on pins 7 and 8 (see Figure 1 on page 5).
The master drive usually defaults to being the “boot” drive
(drive C), from which the computer loads system software
when it first starts up.
To configure the drive as a slave:
•Remove all the jumpers.
•If you need to change the jumpers on your existing hard drive,
see the Disk Manager online manual, look on the drive label,
or contact the drive manufacturer.
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B 5
Figure 1. Master and slave jumper settings
pin 1
ATA interface
connector
135
246
7
8
Slave
Master or single drive
4-pin power
connector
6 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
Attaching cables and mounting the drive
1. If you are attaching a new ATA interface cable to a single drive,
attach one end of the cable to the interface connector on your
host adapter or motherboard. Motherboard connectors can be
identified by the IDE or HDD 40-pin connector. The ATA cable
must be no more than 18 inches (457 mm) long.
2. Thread the interface cable through the drive bay and attach
the connector at the end of the interface cable to your new
drive.
Note. If you have two drives, you can use either connector for
the master or slave drive.
Figure 2. Attaching the cables
Caution. To avoid possible damage to your system,
make sure to align pin 1 on the host adapter or mother-
board with pin 1 on your drive or drives. Pin 1 on the
interface cable is usually indicated by a stripe along the
edge of the cable.
Pin 1
Host
adapter
!
Dieses Handbuch passt für folgende Modelle
14
Inhaltsverzeichnis
Andere Seagate Lagerung Handbücher
Seagate
Seagate Nytro XF1230-1A0240 Bedienungsanleitung
Seagate
Seagate ST760211DE Bedienungsanleitung
Seagate
Seagate ST1.3 Series Bedienungsanleitung
Seagate
Seagate ST31500341AS - Barracuda 1.5 TB Hard Drive Bedienungs- und Sicherheitshinweise
Seagate
Seagate Medalist ST31276A Bedienungsanleitung
Seagate
Seagate EE25.2 - Series 80 GB Hard Drive Bedienungsanleitung
Seagate
Seagate Barracuda 7200.9 ST3120211AS Bedienungsanleitung
Seagate
Seagate ST6000VN0001 Bedienungsanleitung
Seagate
Seagate ST373453LC - Cheetah 73.4 GB Hard Drive Bedienungsanleitung
Seagate
Seagate Hawk 2 ST12400N Bedienungsanleitung
Seagate
Seagate HAWK 2XL Family Bedienungsanleitung
Seagate
Seagate FreeAgent series Bedienungsanleitung
Seagate
Seagate SkyHawk AI Bedienungsanleitung
Seagate
Seagate Barracuda ST250DM000 Bedienungsanleitung
Seagate
Seagate Momentus Thin 5400-RPM Bedienungsanleitung
Seagate
Seagate Medalist Pro 4520 Bedienungsanleitung
Seagate
Seagate HAWK 2LP Family Bedienungsanleitung
Seagate
Seagate Medalist 2532 Bedienungsanleitung
Seagate
Seagate Enterprise Value ST3000NC002 Bedienungsanleitung
Seagate
Seagate ST31000640SS - 1.0TB 7200RPM Sata Sas Bedienungsanleitung
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung