Seagate ST8000VP001 Bedienungsanleitung

100825412, Rev. F

Gen 17 - January 2020

Standard models

ST8000VX002

ST6000VX001

ST4000VX005

ST3000VX009

ST2000VX012

Standard Models

ST8000VP001

ST6000VP001

ST4000VP001

ST2000VP001

Standard Models

ST8000VX008

ST6000VP000

ST4000VX013

ST2000VX015

SATA Product Manual

Publication number: 100825412, Rev. F January 2020

Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SkyHawk and SeaTools are either trade-

marks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are

the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.

Call 877-PUB-TEK1(877-782-8351) to request permission.

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different

standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.

Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and

other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more

information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.

Document Revision History

Revision Date Pages affected

Rev. A 08/24/2017 Initial release.

Rev. B 11/21/2017

6: Revised bullet to - Supports up to 64 HD cameras for recording and playback

8 & 10: Updated Data transfer rate to 185 MB/s

14: Added Figure 1: Location of the HDA temperature check point

17-21: Updated Safety, EMC, FCC & RoHS Sections 2.12 through 2.13.3, per Compliance Council

23: Updated fastener penetration depth to 0.140 inches in Section 3.4 & Figure 2

Rev. C 02/22/2019

fc, 6, 8-12, 16-17, 23 & 30-31: Added 4TB & 2TB models & specifications

8-9: Added 4TB & 2TB to model list & renamed Table 1 Drive specifications summary

8 & 10: Recording & Areal densities

8 & 11: Cache & 2TB weight

9 & 16: Acoustic

12: DC power tables

21: Updated Table 8 Taiwan - Restricted Substances

bc: Updated EMEA & APAC addresses

Rev. D 05/28/2019 6: Removed TGMR bullet

bc: Removed APAC & EMEA addresses

Rev. E 07/19/2019

fc, 6, 8-12, 16-17, 24 & 30-31: Added 8TB model & specifications

8 & 10: Revised Data transfer rate

8 & 11: Updated Physical characteristics

9: Updated Non-recoverable read errors = 10E14

Rev. F 01/15/2020 fc, 6, 8-9: Added new ST models.

30-31: Table 10 Identify device commands, Words 100-103 & 230-233 revised entries.

Rev. F 01/29/2020

fc, 6, 8-9: Revise 5 of the new ST model #s.

5: Updated Seagate Support page

17: Replaced Regulatory Compliance and Safety information with URL and instructions

Seagate SkyHawk Product Manual, Rev. F 2

Contents

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.1 About the SATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.0 Drive Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1 Specification summary tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2.1 LBA mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.3 Default logical geometry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.4 Recording and interface technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.6 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.7 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.7.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.7.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.7.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.7.4 Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.8 Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.8.1 Ambient Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.8.2 Temperature gradient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.8.3 Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.8.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.8.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.8.6 Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9 Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.9.1 Test for Prominent Discrete Tones (PDTs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.10 Electromagnetic immunity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.11 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.11.1 Data loss under power interruption with write cache enabled . . . . . . . . . . . . . . . . . . . . . . 17

2.11.2 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.11.3 HDD and SSD Regulatory Compliance and Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.11.4 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.12 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Seagate SkyHawk Product Manual, Rev. F 3

Contents

3.0 Configuring and Mounting the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.1 Handling and static-discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.2 Configuring the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.3 SATA cables and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3.4 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4.0 SATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Hot-Plug compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.2 SATA device plug connector pin definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.3 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.3.1 Identify Device command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4.3.2 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.3.3 S.M.A.R.T. commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Seagate SkyHawk Product Manual, Rev. F 4

Figures

Figure 1 Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 2 Mounting dimensions (4TB, 3TB & 2TB models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 3 Mounting dimensions (8TB & 6TB models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Seagate SkyHawk Product Manual, Rev. F 5

Seagate® Technology Support Services

For Seagate Product Support, visit: https://www.seagate.com/support

For Seagate Compliance, Safety, and Disposal, visit: https://www.seagate.com/support

For Firmware Download and Tools Download for Secure Erase, visit: https://www.seagate.com/support/downloads/

For information regarding online support and services, visit: http://www.seagate.com/contacts/

For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/

For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/

For Seagate OEM and Distribution partner and Seagate reseller portal, visit: http://www.seagate.com/partners

Seagate SkyHawk Product Manual, Rev. F 6

1.0 Introduction

This manual describes the functional, mechanical and interface specifications for the following

Seagate® Skyhawk and model drives:

These drives provide the following key features:

• 1M hour MTBF - designed for high write duty cycle across SkyHawk

• ATA AV Command support - streaming video command support across SkyHawk

• Best-in-class acoustic performance means virtually silent operation

• Built-in error recovery for non-stop video streaming

• Compliant with RoHS requirements in China and Europe

• Full-track multiple-sector transfer capability without local processor intervention

• Idle3 power mode support

• Low activity power

• Low-RPM spindle speed

• Native Command Queuing with command ordering to increase performance in demanding applications

• Performance-tuned for seamless video applications

• Reliability for 24×7 video surveillance applications

• Rotational Vibration - mitigation of system level rotational vibration inside SkyHawk

• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

• State-of-the-art cache and on-the-fly error-correction algorithms

• Streaming video optimization - consistent command completion times & ERC support across SkyHawk

• Support for S.M.A.R.T. drive monitoring and reporting

•Supports"8+"drivebays

• Supports ATA8 streaming commands

• Supports latching SATA cables and connectors

• Supports up to 64 HD cameras for recording and playback

• Thermal monitoring and reporting for 24×7 operations

• Transient power on management - <=1.8A spin-up current

• Uncompromising reliability supports flexible surveillance design with case temperatures up to 70ºC

• Workload ratings of 180TB/year

• Worldwide Name (WWN) capability uniquely identifies the drive

SkyHawk models

ST8000VX002 ST6000VX001 ST4000VX005 ST3000VX009 ST2000VX012

ST8000VP001 ST6000VP001 ST4000VP001 ST2000VP001

ST8000VX008 ST6000VP000 ST4000VX013 ST2000VX015

Seagate SkyHawk Product Manual, Rev. F 7

www.seagate.com Introduction

1.1 About the SATA interface

The Serial ATA (SATA) interface provides several advantages over the traditional (parallel) ATA interface. The primary

advantages include:

• Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other

configuration options.

• Thinner and more flexible cabling for improved enclosure airflow and ease of installation.

• Scalability to higher performance levels.

In addition, SATA makes the transition from parallel ATA easy by providing legacy software support. SATA was designed to

allow users to install a SATA host adapter and SATA disk drive in the current system and expect all of the existing

applications to work as normal.

The SATA interface connects each disk drive in a point-to-point configuration with the SATA host adapter. There is no

master/slave relationship with SATA devices like there is with parallel ATA. If two drives are attached on one SATA host

adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. This

essentially means both drives behave as if they are Device 0 (master) devices.

The SATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward

compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA data

transfers, resets, and interrupts are all emulated.

The SATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as

the Shadow Register Block. All SATA devices behave like Device 0 devices. For additional information about how SATA

emulates parallel ATA, refer to the “Serial ATA International Organization: Serial ATA Revision 3.0”. The specification can be

downloaded from www.sata-io.org.

Note

The host adapter may, optionally, emulate a master/slave environment to host software where two

devices on separate SATA ports are represented to host software as a Device 0 (master) and Device 1

(slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave

environment manages two sets of shadow registers. This is not a typical SATA environment.

Seagate SkyHawk Product Manual, Rev. F 8

2.0 Drive Specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For

convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models

2.1 Specification summary tables

The specifications listed in Table 1 are for quick reference.

For details on specification measurement or definition, refer to the appropriate section of this manual.

SkyHawk models

ST8000VX002 ST6000VX001 ST4000VX005 ST3000VX009 ST2000VX012

ST8000VP001 ST6000VP001 ST4000VP001 ST2000VP001

ST8000VX008 ST6000VP000 ST4000VX013 ST2000VX015

Table 1 Drive specifications summary

Drive Specification*

ST8000VX002,

ST8000VP001,

ST8000VX008

ST6000VX001,

ST6000VP001,

ST6000VP000

ST4000VX005,

ST4000VP001,

ST4000VX013

ST3000VX009

ST2000VX012,

ST2000VP001,

ST2000VX015

Formatted capacity

(512 bytes/sector)** 8000GB (8TB) 6000GB (6TB) 4000GB (4TB) 3000GB (3TB) 2000GB (2TB)

Guaranteed sectors 15,628,053,168 11,721,045,168 7,814,037,168 5,860,533,168 3,907,029,168

Heads 8 4 2

Disks 4 2 1

Bytes per sector

(emulated at 512-byte sectors) 4096 (physical)

Default sectors per track 63

Default read/write heads 16

Default cylinders 16,383

Recording density 2197 kB/in

Track density (avg) 540 ktracks/in

Areal density (avg) 1186 Gb/in2900 Gb/in21186 Gb/in2900 Gb/in21186 Gb/in2

SATA interface transfer rate 600 MB/s

Maximum data transfer rate 180 MB/s

ATA data-transfer modes supported

PIO modes: 0 to 4

Multiword DMA modes: 0 to 2

Ultra DMA modes 0 to 6

Cache buffer 256MB

Height 26.1mm / 1.028 in (max) 20.20mm / 0.795 in (max)

Width 101.6mm (± 0.25) / 4.0 in (± 0.010)

Length 146.99mm / 5.787 in (max)

Weight (typical) 630g / 1.389 lb 610g / 1.345 lb 490g / 1.08 lb 415g / 0.915 lb

Average latency 6.0 ms

Power-on to ready (typ) 15.0s 10.0s 8.0s

Standby to ready (typ) 15.0s 10.0s 8.0s

Startup current (typical) 12V 1.8A 1.1A

Voltage tolerance (including noise) 5V ±5%

12V ±10%

Non-Operating (Ambient °C) –40° to 70°

Operating ambient temperature

(min °C) #0°

Seagate SkyHawk Product Manual, Rev. F 9

www.seagate.com Drive Specifications

* All specifications above are based on native configurations.

** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity.

Accessible capacity may vary depending on operating environment and formatting.

*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.

specification, which may increase acoustic and power to operational levels.

† Seagate does not recommend operating at sustained case temperatures above 60°C.

Operating at higher temperatures will reduce useful life of the product.

# The operating case temperature is 0 to 70C (32 to 158F).

The recommended measure location can be found in Section 3.4 Figure 2& 3.

Operating temperature

(drive case max °C) 70°†

Temperature gradient 20°C per hour max (operating)

30°C per hour max (non-operating)

Relative humidity 5% to 90% (operating)

5% to 95% (non-operating)

Relative humidity gradient (max) 30% per hour

Wet bulb temperature (max) 30°C max (operating)

40°C max (non-operating)

Altitude, operating –304m to 3048m

(–1000 ft to 10,000 ft)

Altitude, non-operating

(below mean sea level, max)

–304m to12,192m

(–1000 ft to 40,000+ ft)

Operational shock (max) 80 Gs (read) / 70 Gs (write) at 2ms

Non-operational shock (max) 300 Gs at 2ms 350 Gs at 2ms

Vibration, operating

10Hz to 22Hz: 0.25 Gs, Limited displacement

22Hz to 350Hz: 0.50 Gs

350Hz to 500Hz: 0.25 Gs

Vibration, non-operating

5Hz to 22Hz: 3.0 Gs

22Hz to 350Hz: 3.0 Gs

350Hz to 500Hz: 3.0 Gs

Drive acoustics, sound power

Idle*** 2.6 bels (typical)

2.7 bels (max)

Seek 2.7 bels (typical)

2.8 bels (max)

Non-recoverable read errors 1 per 1014 bits read

Rated workload

Average annualized workload rating: <180TB/year.

The specifications for the product assumes the I/O workload does not exceed the average

annualized workload rate limit of 180TB/year. Workloads exceeding the annualized rate may

degrade and impact reliability as experienced by the particular application. The average

annualized workload rate limit is in units of TB per calendar year.

Warranty

To determine the warranty for a specific drive, use a web browser to access the following web

page: http://www.seagate.com/support/warranty-and-replacements/

From this page, click on “Is my Drive under Warranty”. Users will be asked to provide the drive

serial number, model number (or part number) and country of purchase. The system will

display the warranty information for the drive.

Load/unload cycles

(at 25°C, 50% rel. humidity) 600,000

Supports hotplug operation per the

Serial ATA Revision 3.2 specification Yes

Note If the drive is powered-off before issuing flush cache command, in some instances,

the end user data in the DRAM cache might not be committed to the disk.

Table 1 Drive specifications summary (continued)

Drive Specification*

ST8000VX002,

ST8000VP001,

ST8000VX008

ST6000VX001,

ST6000VP001,

ST6000VP000

ST4000VX005,

ST4000VP001,

ST4000VX013

ST3000VX009

ST2000VX012,

ST2000VP001,

ST2000VX015

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Seagate Lagerung Handbücher

Seagate

Seagate MEDALIST 1080SL Bedienungsanleitung

Seagate

Seagate ST3750641NS Bedienungsanleitung

Seagate

Seagate Momentus 4200.3 Bedienungsanleitung

Seagate

Seagate ST3000DM008 Bedienungsanleitung

Seagate

Seagate FreeAgent Theater Bedienungsanleitung

Seagate

Seagate ST310014A Bedienungsanleitung

Seagate

Seagate ST3300657SS - Cheetah 300 GB Hard Drive Bedienungs- und Sicherheitshinweise

Seagate

Seagate Nytro XF1230-1A0240 Bedienungsanleitung

Seagate

Seagate EXOS ENTERPRISE 512E Series Bedienungsanleitung

Seagate

Seagate ST34321A Bedienungsanleitung

Seagate

Seagate BARRACUDA2, 2HP ST12450W/WD Bedienungsanleitung

Seagate

Seagate Elite 9 Bedienungsanleitung

Seagate

Seagate ST43400N/ND Bedienungsanleitung

Seagate

Seagate GoFlex Satellite Bedienungsanleitung

Seagate

Seagate IRONWOLF ST6000VN0033 Bedienungsanleitung

Seagate

Seagate Medalist 2532 Bedienungsanleitung

Seagate

Seagate ST1000LM014 Bedienungsanleitung

Seagate

Seagate ST9120315AS - Momentus 5400.6 120 GB Hard... Bedienungs- und Sicherheitshinweise

Seagate

Seagate Exos AP 2U12-B Bedienungsanleitung

Seagate

Seagate Exos 7E10 Bedienungsanleitung

Seagate

Seagate ST92011A - Momentus 20 GB Hard Drive Bedienungsanleitung

Seagate

Seagate Cheetah 15K Bedienungsanleitung

Seagate

Seagate FireCuda 520 Bedienungsanleitung

Seagate

Seagate NAS HDD Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung