Sealey TD1202S Bedienungsanleitung

INSTRUCTIONS FOR

SLIDE RATCHET TIE DOWN 32MM X 3MTR POLYESTER

WEBBING WITH S HOOKS 1200KG LOAD TEST

MODEL NO: TD1202SR

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

9When selecting web lashings (tie downs) consideration must be

given to the required lashing capacity, taking into account the

mode of use and the nature of the load to be secured.

9Tie downs must be strong enough and of the correct length for

the mode of use.

9Take care that the load is stable when the tie down is released.

9Avoid exposure of the tie down to chemicals.

8DO NOT use if tie down is damaged. A visual inspection before

use is recommended.

9Avoid sharp edges. Protect tie downs by using sleeves or

corner protectors.

DO NOT overload.

8DO NOT use if knotted.

2. INTRODUCTION

Manufactured from polyester webbing with stitched reinforcement around hooks and all xing points. Suitable for securing weighty

loads and tarpaulins onto trailers. Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing

superior load restraint. Sliding feature allows mechanism to be located at any point along run of webbing, resulting in reduced load

damage and ease of operation. Hook and loop retainers tidy away excess webbing for improved safety and reduced wear. Supplied in

plastic display case.

3. SPECIFICATION

Model no: ............................................................. TD1202SR

Quantity:...............................................................................2

Maximum tension: ........................................................ 600kg

Load test: ................................................................... 1200kg

Webbing width:............................................................. 32mm

Webbing length: ..............................................................3mtr

Hook: ...........................................................................S-type

4. OPERATION

4.1. TIGHTENING

4.1.1. Open ratchet to unlocked position, g.1.

4.1.2. Place switching latch in sliding position, g.2.

4.1.3. Be sure the centre shaft of the ratchet is parallel with the webbing, g.3. When the ratchet is open the centre shaft can be turned

manually, g.4.

4.1.4. Slide the ratchet along the webbing to the desired operating position, g.1.

4.1.5. Place the switching latch in the locked position, g.2.

4.1.6. Attach hook to anchor ring, g.5.

4.1.7. Make sure webbing is not twisted.

TD1202SR | Issue:1 13/10/17

Original Language Version

Refer to

instruction

manual

fig.1 fig.2 fig.3 fig.4 fig.5

4.1.8. Take up the slack in the webbing by pulling the extra webbing through the centre shaft, g.6.

4.1.9. Begin to ratchet tight, be sure to go 2 complete turns around the centre ratchet tightening shaft, g.7.

WARNING! DO NOT over tighten. The ratchet mechanism can damage or crush objects.

4.1.10. Fold up all excess webbing in a bundle, place on the ratchet and bundle together with the double-sided hook and loop strap, g.8.

4.2. RELEASING

4.2.1. Undo Velcro strap and remove bundle of excess webbing, g.9.

4.2.2. Pull back on the red release handle and then move the ratchet into the 180° open position, strap will unlock, g.10.

4.2.3. Once strap is unlocked, if the webbing is still wrapped around the centre shaft, simply take hold of both pieces of webbing going

through the centre shaft and with a quick snapping action pull both ends and the centre shaft will return to normal ‘ready to use’

position, g.11.

4.2.4. Return the switching latch back to the unlocked (sliding) position, g.12.

4.2.5. Remove the hooks, g.13.

4.2.6. Wrap the strap up and secure with the hook and loop bundling tie attached to the ratchet, g.14.

5. STORAGE

5.1. Always store in a dry place.

6. MAINTENANCE

6.1. Use a light duty oil on the gears and slides to keep the ratchet operating properly.

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

fig.9 fig.10 fig.11 fig.12

fig.13 fig.14

TD1202SR | Issue:1 13/10/17

fig.6 fig.7 fig.8

Inhaltsverzeichnis

Andere Sealey Hebesystem Handbücher

Sealey

Sealey AVR1500FP Bedienungsanleitung

Sealey

Sealey MPSD1 Bedienungsanleitung

Sealey

Sealey DH03.V2 Bedienungsanleitung

Sealey

Sealey MC390AH Bedienungsanleitung

Sealey

Sealey AK98943 Bedienungsanleitung

Sealey

Sealey PPL01 Bedienungsanleitung

Sealey

Sealey MC450.V2 Bedienungsanleitung

Sealey

Sealey DH03.V2 Bedienungsanleitung

Sealey

Sealey MC480.V3 Bedienungsanleitung

Sealey

Sealey WD80 Bedienungsanleitung

Sealey

Sealey MC480.V3 Bedienungsanleitung

Sealey

Sealey MC390.V2 Bedienungsanleitung

Sealey

Sealey MC390 Bedienungsanleitung

Sealey

Sealey Quality MACHINERY MC402.V3 Bedienungsanleitung

Sealey

Sealey MCl500 Bedienungsanleitung

Sealey

Sealey AVR2500A Bedienungsanleitung

Sealey

Sealey 1250CX Bedienungsanleitung

Sealey

Sealey MT680.V3 Bedienungsanleitung

Sealey

Sealey MC454E Bedienungsanleitung

Sealey

Sealey MC450 Bedienungsanleitung

Sealey

Sealey MC402.V4 Bedienungsanleitung

Sealey

Sealey MC401 Bedienungsanleitung

Sealey

Sealey WD80 Bedienungsanleitung

Sealey

Sealey MS064 Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung