Sealey BT3000 Bedienungsanleitung

INSTRUCTIONS FOR

BLUETOOTH ® BATTERY TESTER

MODEL NO: BT3000

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used

according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to

instructions

Electrical

shock

hazard

Wear eye

protection

Wear protective

gloves

Warning:

corrosive

substance

Warning:

explosive

material

Keep away

from sources of

ignition

Use in well

ventilated areas

Keep in dry area

protect from rain

BT3000 | Issue 1 12/04/17

Original Language Version

1. SAFETY

9Read the entire manual before using this product. Failure to do so could result in serious injury or death.

9The tester is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning the use of the tester by a person responsible for their safety.

8DO NOT operate the tester if it has received a sharp blow, been dropped or otherwise damaged in any way.

8DO NOT not disassemble the tester.

9Batteries generate explosive gases during normal battery operation. To reduce the risk of a battery explosion,

follow these instructions and those published by the battery manufacturer or any equipment you intend to use

in the vicinity of the battery. Review the cautionary markings on these products and on the engine.

8DO NOT smoke or allow a spark or ame in the vicinity of a battery or engine.

9Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid

battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like, to metal,

causing a severe burn.

9Reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit the battery or other

electrical part that may cause an explosion.

9Have someone nearby to come to your aid when you work near a lead-acid battery.

9Have plenty of fresh water and soap nearby in case battery acid contacts your skin, clothing or eyes.

9If battery acid contacts your skin or clothing, immediately wash the area with soap and water. If acid enters

your eye, immediately ood the eye with cold water and obtain medical attention immediately.

9If battery acid is accidentally swallowed, drink milk or water. DO NOT induce vomiting. Seek medical attention.

2. INTRODUCTION

Perform battery and charging system tests from your smartphone or tablet. Fast and accurate diagnosis with facility

to forward results via email or text to workshop reception or customer. Waterproof (IP65) rating and 50cm cable.

Rechargeable internal Li-ion battery, allowing testing of batteries with as little as 1.5V of residual charge. Fast

Bluetooth® pairing, can store up to 2,000 detailed test reports. Suitable for automotive (including start/stop), motorcycle,

marine and leisure batteries.

3. SPECIFICATION

Model No: .................................................................................................. BT3000

Internal Battery: ........................................................... Lithium ion 3.7V, 1150mAh

Rated Battery Voltage:.................................................................................. 6/12V

Charging System Capability: ...................................................................... 12/24V

Rating System: .........................................................DIN, EN, IEC, SEA, CA/MCA

Test Range: ............................................................................ 25-1300 CCA* DIN

..................................................................................................40-2100 CCA* EN

.................................................................................................30-1500 CCA* IEC

................................................................................................40-2000 CCA* SEA

...................................................................................................50-2400 CA/MCA

Voltage Range:..........................................................................................1.5-32V

Wireless Connection Range: ........................................................................ 10mtr

Operating System:.................(Apple) iOS 8.0 and later, Android OS 4.3 and later.

Note:................................... Free App download required from relevant App store.

BT3000 | Issue 1 12/04/17

Original Language Version

4. PREPARING THE BATTERY

4.1. Be sure the area around the battery is well ventilated while the battery is being tested.

4.2. Clean the battery terminals. Be careful to keep corrosion from coming in contact with your eyes, nose and mouth.

4.3. Inspect the battery for a cracked or broken case or cover. If the battery is damaged, do not use the tester.

4.4. If the battery is not a sealed maintenance-free battery, check the level of each cell and if necessary, add distilled

water until the battery acid reaches the level specied by the manufacturer. This helps purge excessive gas from

the cells. DO NOT overll.

4.5. If necessary to remove the battery from vehicle to test it, always remove the ground terminal from the battery rst.

Make sure all accessories in the vehicle are off to ensure you DO NOT cause any arcing.

4.6. Modern vehicles contain extensive electronic systems. You are required to check with the vehicle Manufacturer, for

any specic instructions regarding the use of this type of equipment on each vehicle. No liability will be accepted for

damage / injury, where this product is not used in accordance with all instructions.

4.7. Note: The internal battery is charged during the connection to the battery being tested.

1. Battery Clamps (not shown)

2. Bluetooth Status (blue) LED

3. Battery Status (green) LED

4. Check (red) LED.

5. Reset power button.

5. INSTALLING THE APP

5.1. Download and install the App “SEALEY BT3000”. (App Store or Google Pay). Look for the icon. Note: for

Apple devices it requires iOS 8.0 or latter, Android devices, OS 4.3 or later.

5.2. New Use Setup

When us ing the App for th e r st t ime, yo u mu st com plete Reg istra tion.

1. Run the App on your mobile device.

2. Select “NEW USER” (g.2)

3. Fill in all of the required elds, and then check the box for “AGREE TO TERMS AND CONDITIONS”. Press

“CONTINUE” (g.3)

4. Log in: Enter the email address provided during registration. Check the box for” REMEMBER ACCOUNT”.

Press “LOG IN”. (g.4)

g.1

BT3000 | Issue 1 12/04/17

Original Language Version

6. CONNECTING THE TESTER

6.1. Before testing a battery in a vehicle, turn off the ignition, all accessories and loads. Close all of the vehicle`s

doors and boot lid.

6.2. Make sure the battery terminals are clean. Use a wire brush to clean them if necessary. Note: This tester works

best if the battery connects have been removed and the battery posts have been cleaned. Any corrosion between

the tester clamps and the battery connectors, or between the battery connectors and the battery posts, will

degrade the tester`s efciency.

6.3. Connect the positive (red) clamp to the positive (POS,P,+) battery post. Connect the negative (black) clamp to the

negative (NEG,N,-) battery post.

7. OPERATING INSTRUCTIONS

7.1. Battery Test

7.1.1. Run the App on your mobile device and log in.

7.1.2. Press “Scan+” in the upper right corner of the HOME screen. (If the TEST icon is red, the tester is connected; no

need to proceed to Scan+.) The system will scan and nd the tester.

7.1.3. Once the tester shows on the screen, select “Press To Start” to connect.

7.1.4. When connected, press “CONNECTED CONTINUE” (g.6). In this screen, the user may create a name for the

tester. (g.9) Swipe the “TEST>” area (g.7) of the active tester to bring up the Edit option. (g.8)

g.2 g.3 g.4 g.5

BT3000 | Issue 1 12/04/17

Original Language Version

7.1.5. Press “TEST” to enter the testing process.

7.1.6. Select “Battery Test” Set up test on each icon to select Battery Type, Rating and Set Capacity (or Rated CCA)

7.1.7. Press “START TEST” to begin testing. At any time in the process

press “<” to return to the previous screen. (g.10)

7.1.8. Conrm whether the battery has been charged. (g.11)

g.6 g.8

g.7 g.9

g.10

BT3000 | Issue 1 12/04/17

Original Language Version

g.11

7.1.9. The test report is displayed. (g.12) User may select “RETEST BATTERY”

7.1.10. Press “EMAIL/TEXT RESULTS” and then select the application.

Note: Your mobile device must have E-Mail capability to use the EMAIL/TEXT RESULTS function. (g.13/14)

7.1.11. Results will be sent.

7.2. System Test

7.2.1. From the TEST menu, select , Select Battery Type, Rating and Set Capacity (or Rated CCA) (g.15)

7.2.2. Press “START TEST” to begin the system test. At any time in the process, press “<” to return to the previous

screen.

7.2.3. Follow all screen prompts. (g.16 to g.21)

7.2.4. The test report is displayed. (g.22)

7.2.5. Press “EMAIL/ TEXT RESULTS”, and then select the application. Note: Your mobile device must have E-Mail

capability to use the EMAIL/TEXT RESULTS function.

7.2.6. Results will be sent.

7.3. EV Battery Test

7.3.1. From the TEST menu, select “EV BATTERY TEST” Set up the test by swiping up or down on each column

to select the battery brand and model. (g.23)

7.3.2. Press “START TEST” to begin testing. At any time in the process, press “<” to return to the previous screen.

Set up test by swiping up or down on each column to select Battery Type, Rating and Set Capacity (or Rated

CCA)

7.3.3. Follow all screen prompts.

7.3.4. The test report is displayed.

7.3.5. Press “EMAIL/TEXT RESULTS” and then select the application. Note: Your mobile device must have E-Mail

capability to use the EMAIL/TEXT RESULTS function.

7.3.6. Results will be sent.

g.12 g.14 g.13

BT3000 | Issue 1 12/04/17

Original Language Version

g.15

BT3000 | Issue 1 12/04/17

Original Language Version

g.16 g.17 g.18 g.19

g.20 g.21 g.22 g.23

7.4. Start-Stop Test

7.4.1. From the TEST menu select.

7.4.2. Press “START TEST” to begin testing. (g.24)

7.4.3. Follow all screen prompts.

7.4.4. The test report is displayed.

7.4.5. Press “EMAIL/TEXT RESULTS” and then select the application.

Note: Your mobile device must have E-Mail capability to use the EMAIL/TEXT RESULTS function.

7.4.6. Results will be sent.

7.5. Accessing Test Results.

7.5.1. From the HOME screen, scroll down and select “TEST RECORDS”.(g.25)

7.5.2. Select from stored test records to view, email/text or delete.(g.26)

BT3000 | Issue 1 12/04/17

Original Language Version

g.24 g.25 g.26

BT3000 | Issue 1 12/04/17

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and

component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Original Language Version

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging

should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the

environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids

(if applicable) into approved containers and dispose of the product and the fluids according to local

regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be

disposed of in an environmentally protective way. Contact your local solid waste authority for recycling

information.

Battery Removal

The battery is not intended for removal

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform

potential purchasers of products containing batteries (as dened within these regulations), that they are

registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer

Registration Number (BPRN) is BPRN00705.

Inhaltsverzeichnis

Andere Sealey Prüfgeräte Handbücher

Sealey

Sealey VS2050 Bedienungsanleitung

Sealey

Sealey HBS971 Bedienungsanleitung

Sealey

Sealey PPHY Bedienungsanleitung

Sealey

Sealey VS027.V2 Bedienungsanleitung

Sealey

Sealey VS926 Bedienungsanleitung

Sealey

Sealey VS2030.V2 Bedienungsanleitung

Sealey

Sealey PP100.V2 Bedienungsanleitung

Sealey

Sealey BT2101 Bedienungsanleitung

Sealey

Sealey CV2030 Bedienungsanleitung

Sealey

Sealey VS8193 Bedienungsanleitung

Sealey

Sealey CV0011 Bedienungsanleitung

Sealey

Sealey BT91/10 Bedienungsanleitung

Sealey

Sealey AUTO SERVICE VSE206 Bedienungsanleitung

Sealey

Sealey BT101 Bedienungsanleitung

Sealey

Sealey Auto Service Line TA131 Bedienungsanleitung

Sealey

Sealey BT91/3.V2 Bedienungsanleitung

Sealey

Sealey VS400 Bedienungsanleitung

Sealey

Sealey BT2002 Bedienungsanleitung

Sealey

Sealey BT2001 Bedienungsanleitung

Sealey

Sealey AUTO SERVICE BT91/7C Bedienungsanleitung

Sealey

Sealey VS0061 Bedienungsanleitung

Sealey

Sealey Auto Service VS0271 Bedienungsanleitung

Sealey

Sealey TA319 Bedienungsanleitung

Sealey

Sealey VS0275.V2 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung