Sealife DC800 MAXX Bedienungsanleitung
SeaLife DC800 Underwater Camera
Go to www.sealife-cameras.com/service/manuals.html for
ENGLISH, FRANÇAIS, DEUTSCH, ITALIANO, ESPAÑOL, NEDERLANDS
and Türkçe versions
Trademarks >>
1
READ THIS FIRST
Trademark Information
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
Corporation.
Pentium® is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Computer, Inc.
SD™ is a trademark.
SeaLife® is a registered trademark of Pioneer Research.
Product Information
Product design and specifications are subject to change without notice.
This includes primary product specifications, software, software drivers,
and user’s manual. This User Manual is a general reference guide for the
product.
The illustrations in this manual are for the purpose of explanation and may
differ from the actual design of your camera.
The manufacturer assumes no liability for any errors or discrepancies in
this user manual.
Safety Instructions >>
2
SAFETY INSTRUCTIONS
Read and understand all Warnings and Cautions before using this product.
Warnings
Continued use under the following conditions may cause fire or electric shock.
Contact your local authorized SeaLife dealer for repair service if the product
is damaged.
If foreign objects or water have entered the camera, turn the power
off and remove the battery.
If the camera has fallen or its case has been damaged, turn the power
off and remove the battery.
Do not disassemble, change or repair the camera.
Use the supplied AC adapter only with the indicated power supply
voltage.
Do not use the camera in areas near water, rain, snow, high humidity,
sand, dirt or combustible gas* unless it is properly sealed in the
waterproof housing provided.
* Warning - the camera inside the waterproof housing IS NOT certified
to be intrinsically safe. Using the camera in an environment containing
combustible gases may result in explosion or fire.
Keep the battery out of the reach of children.
The battery might cause poisoning. If any part of the battery is accidentally
swallowed, immediately consult a physician.
Do not use the camera while you are walking, driving or riding a
motorcycle.
This might cause you to fall over or result in traffic accident.
Cautions >>
3
Cautions
Do not fire the flash close to anyone’s eyes.
This might cause damage to the person’s eyesight.
Do not subject the LCD monitor to impact.
This might damage the glass on the screen or cause the internal fluid to
leak. If the internal fluid enters your eyes or comes into contact with your
body or clothes, rinse with fresh water. If the internal fluid has entered your
eyes, consult a physician to receive treatment.
A camera is a precision instrument. Do not drop it, strike it or use
excessive force when handling the camera.
This might cause damage to the camera.
Do not remove the battery immediately after long period of continuous
use.
The battery becomes hot during use. Touching a hot battery might cause
burns.
Do not wrap the camera or place it in cloth or blankets.
This might cause heat to build up and deform the case, resulting in fire.
Use the camera in a well-ventilated place.
Do not leave the camera in places where the temperature may rise
significantly, such as inside a car.
This might adversely affect the case or the parts inside, resulting in fire.
Before you move the camera, disconnect cords and cables.
Failure to do this might damage cords and cables, resulting in fire and
electric shock.
Battery Usage >>
4
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the Safety
Instructions and the notes described below:
Use only the specified battery (3.7V) provided with the camera.
Extremely cold environments can shorten the battery life and reduce camera
performance.
When you are using a new rechargeable battery or a rechargeable battery
that has not been used for an extended period of time, it may affect
the number of images that can be captured. Therefore, to maximize its
performance and lifetime, we recommend that you fully charge the battery
and discharge it for at least one complete cycle before use.
The battery may feel warm after a long period of continuous use of the
camera or the flash. This is normal and not a malfunction.
The camera may feel warm after a long period of continuous use. This is
normal and not a malfunction.
If the battery is not to be used for a long period of time, remove it from the
camera to prevent leakage or corrosion and store it after no battery power
is left. Stored for a long time in a fully charged condition, its performance
may be impaired.
Always keep the battery terminals clean.
There is a risk of explosion if the battery is replaced by an incorrect
type.
Dispose of used battery according to your local recycling laws.
Charge the battery fully before using for the first time.
To prevent short-circuiting or fire, keep the battery away from other metal
objects when carrying or storing.
Important Notes on Waterproof Function >>
5
Important Notes on Waterproof Function and Waterproof Housing
Read and understand the instructions contained in this manual before
using underwater.
The inner camera is not waterproof or shock protected. Seal the camera
inside the waterproof housing in areas of water, rain, snow, high humidity,
sand, dirt or combustible gas*.
* Warning - the camera inside the waterproof housing IS NOT certified
to be intrinsically safe. Using the camera in an environment containing
combustible gases may result in explosion or fire.
Make sure the rubber dust cover provided is completely inserted into the
camera’s USB and Power ports unless charging the camera’s battery or
connecting the camera to the computer.
Follow these important O-ring care instructions or the waterproof housing
may leak.
* Do not lubricate o-ring.
* Inspect and clean O-ring and O-ring contact su rfaces for sand, hair and
other debris before every use. Clean O-ring and O-ring contact surfaces
with cleaning brush provided.
* Inspect O-ring and O-ring contact surfaces for damage (cuts, scratches,
tears, cracks, dents and any other imperfections.) Replace O-ring or have
waterproof housing serviced if the O-ring or O-ring contact surfaces become
damaged.
* Do not use underwater housing if O-ring or O-ring contact surfaces are
damaged.
* Make sure O-ring is completely seated into O-ring groove before sealing
housing.
* Make sure the O-ring is not twisted when seated in the O-ring groove.
* Carefully follow O-ring removal and installation instructions contained in
this manual.
* Replace O-ring every year to ensure proper seal. Only use approved SeaLife
O-ring designed for the DC800. Replacement O-rings are available at your
local authorized SeaLife dealer.
Carefully close lid and latch to seal housing and make sure there are no
obstructions that prevent housing from closing or sealing properly.
Notes on Waterproof Function >>
6
Soak and rinse waterproof housing in fresh water for about 2 minutes after
underwater use or if the housing becomes dirty.
* Push each button several times to clean out any saltwater, sand or dirt that
may be trapped under the buttons.
* Use clean,soft cloth to dry housing.
* Store camera and housing only after careful cleaning and when totally
dry.
Do not let any moisture or dirt get inside housing when opening. This may
result in damage to the inner camera.
Make sure that you and the waterproof housing are completely dry before
opening the waterproof door or changing the batteries or the SD memory
card.
Avoid opening housing wet, sandy or humid environments. It is
recommended to open and load the housing in dry cool air, such as inside
an air conditioned room. This will prevent water or humidity from being
trapped inside the housing, which may cause fogging to occur or damage
the inner camera.
Avoid getting sunscreen or suntan oil on the camera as it may cause
discoloration of the surface. If any oil gets on the camera, wash it off
immediately with warm water.
The waterproof function does not apply to the camera’s accessories.
Do not exceed the depth rating of 60m (200ft.) or the housing may become
damage and leak.
The camera will sink if dropped in water, so be sure to attach the strap to
your wrist or buoyancy control device (BDC) when using the camera in or
near water.
Store housing at room temperature in a clean and dry place.
Do not expose housing to direct sunlight for prolonged periods of time.
Do not store housing in extreme high temperatures, such as the trunk of
your car.
Contents >>
7
CONTENTS
9 INTRODUCTION
9 Overview
10 Package Contents
11 GETTING TO KNOW YOUR CAMERA
11 Front View
12 Rear View
13 LCD Monitor Display
15 GETTING STARTED
15 Preparation
16 Charging the Battery
17 Initial Settings
19 CAPTURE MODE
19 Capturing Images
20 Setting the Focus
21 About External Flash Modes
23 About Sea Mode
24 About Spy Mode
25 Recording Shots using Face Detection Technology
26 Recording Voice Memos
27 VIDEO MODE
27 Recording Video Clips
28 Playing Back Video Clips
29 PLAYBACK MODE
29 Playing Back Still Images
30 Thumbnail Display
31 Removing Red-eye
31 Attaching Voice Memos
32 Playing back voice memo
32 Protecting Images
34 Erasing Images
36 MENU OPTIONS
36 Capture Menu
41 Video Menu
43 Playback Menu
45 Setup Menu
Contents >>
8
47 TRANSFERRING FILES TO YOUR COMPUTER
47 Downloading Your Files
48 USING THE CAMERA AS A PC CAMERA
49 EDITING SOFTWARE INSTALLATION
50 SPECIFICATIONS (INNER CAMERA ONLY)
51 APPENDIX
51 Possible number of shots (still image)
52 Possible recording time / sec (video clip)
52 Connecting to a PictBridge Compliant Printer
56 UNDERWATER HOUSING INSTRUCTIONS
57 MUST DO for underwater housing:
59 Maintaining a waterproof seal
60 Quick waterproof test (before you depart on your dive trip)
61 HOW TO INSTALL AND REMOVE O-RING
63 HOW TO OPEN AND CLOSE WATERPROOF HOUSING
65 Installing the Flash Link optical cable adapter
67 How to set-up the Waterproof Housing
69 Using and cleaning the underwater housing and camera
71 Great Underwater Pictures Made Easy
73 TROUBLESHOOTING GUIDE
77 HOUSING SPECIFICATIONS
Andere Handbücher für DC800 MAXX
3
Inhaltsverzeichnis
Andere Sealife Digitalkamera Handbücher
Sealife
Sealife DC500 Bedienungsanleitung
Sealife
Sealife DC800 MAXX Bedienungsanleitung
Sealife
Sealife Reefmaster DC250 Administratorhandbuch
Sealife
Sealife DC800 MAXX Bedienungsanleitung
Sealife
Sealife DC1000 MAXX Bedienungsanleitung
Sealife
Sealife Reefmaster SL332 Bedienungsanleitung
Sealife
Sealife DC500 Bedienungsanleitung
Sealife
Sealife DIGITAL PRO FLASH Bedienungsanleitung
Sealife
Sealife DC1200 Bedienungsanleitung
Sealife
Sealife DC300/DC310 Bedienungsanleitung
Sealife
Sealife DC1000 MAXX Bedienungsanleitung
Sealife
Sealife DC1400 Limited Edition Pink Bedienungsanleitung
Sealife
Sealife Reefmaster DC100 Bedienungsanleitung
Sealife
Sealife Reefmaster DC250 Bedienungsanleitung
Sealife
Sealife DC1400 Limited Edition Pink Bedienungsanleitung
Sealife
Sealife ReefMaster DC600 Bedienungsanleitung
Sealife
Sealife DC1000 MAXX Bedienungsanleitung
Sealife
Sealife D1400 Bedienungsanleitung
Sealife
Sealife Reefmaster DC100 Bedienungsanleitung
Sealife
Sealife DC800 MAXX Bedienungsanleitung
