Sealite TRIDENT-1400 Beilage
Version 1.0
TRIDENT-1400
1400mm dia. Navigation Buoy
Installation & Service Manual
Technical Specications
Figure 1.
A
PCD 200.0
PCD 150.0
0.15
30.00°
DETAIL A
SCALE 1 : 10
1/2 "- 13 UNC X 3/4" Deep
6 Places
1/4 "- 20 UNC X 3/4" Deep
3 Places
150mm
50.0
mm
0.22m
Operational
Reserve
0.32m
1.40m
0.89m
1.8m
2.4m
3.3m
5.2m
Waterline at max mooring
Latest products and information available at www.sealite.com
3
TRIDENT-1400
1400mm dia. Navigation Buoy
Table of Contents
Introduction..........................................................................................Page 4
Sealite Buoy Division..........................................................................Page 4
Why Choose Polyethylene Buoys? ...................................................Page 4
Mooring Requirements & Regulations ..............................................Page 4
TRIDENT-1400 Navigation Buoy.........................................................Page 5
Product Components...................................................................Page 6
Assembly Instructions .................................................................Page 7
Mooring Table ....................................................................................Page 10
Marine Buoy Maintenance ................................................................Page 11
Repair Prodedures ............................................................................Page 12
Anode Replacement..........................................................................Page 12
Disposal Plan.....................................................................................Page 13
Sealite Buoy Warranty ......................................................................Page 15
Version No. Description Date Approved
1.0 Manual Launch January 2014 M. Henry
Latest products and information available at www.sealite.com
4
TRIDENT-1400
1400mm dia. Navigation Buoy
Introduction
Congratulations! By choosing to purchase a Sealite Buoy, you have become the
owner of one of the most advanced rotationally-moulded polyethylene marine buoys
in the world.
Sealite Pty Ltd has been manufacturing buoys for over 25 years, and particular care has been taken to
ensure your buoy gives years of service.
As a commitment to producing the highest quality products for our customers, Sealite has been
independently certied as complying with the requirements of ISO 9001:2008 quality management
system.
By taking a few moments to browse through this booklet, you will become familiar with the versatility of
your buoy, and be able to maximise its operating function.
Sealite Buoy Division
Sealite marine buoys are manufactured on-site from rotationally-moulded UV-stabilised polyethylene,
and are designed to offer a low-maintenance, high visibility solution to marine navigation.
The Sealite buoy division provides turn-key production of navigation buoys. From tooling development,
raw materials selection, and production, to nal testing and inspection, Sealite guarantees superior
quality and fast turn-around times.
Sealite’s buoy products are available in a wide range of congurations and sizes, and can be
economically shipped worldwide.
Why Choose Polyethylene Buoys?
• No painting
• Inhibits growth
• Increased interval between servicing
• Routine maintenance on location
• Easily repaired in the unlikely event of damage
• Lightweight for ease of deployment and maintenance
• Environmentally friendly – no use of toxic antifouling paint
4. Mooring Requirements & Regulations
Please contact your local authority for any specic requirements regarding the deployment of buoys.
IALA also has guidelines and recommendations that should be followed.
All information given in this manual is advisory only. Please consult with your local authority before
deploying your buoy products.
Local conditions that need to be considered include:-
• Water depth
• Maximum currents
• Maximum wind speeds
• Sinker size and weight
Latest products and information available at www.sealite.com
5
TRIDENT-1400
1400mm dia. Navigation Buoy
SPECIFICATIONS•* TRIDENT-1400
General Characteristics
Available Colours Red, Green,White,Yellow as per IALA Recommendations
Focal Plane Height (mm/inches) 2700 / 106¼ (nominal)
Total Float Volume (ltrs/US gallon) 1888 / 498
Nominal Freeboard (mm/inches) 540 / 21¼
Nominal Draft (mm/inches) 1580 / 62¼
Reserve Buoyancy (kgs/lbs) 570 / 1256
Draft, Maximum (mm/inches) 1800 / 707/8
Freeboard, Minimum (mm/inches) 320 / 125/8
Safe Working Load, lift (kgs/lbs) 4000 / 8818 (per eye)
Safe Mooring Load, (kgs/lbs) 2400 / 5290 (per mooring point)
Submergence (kg/cm, lb/inches) 15 / 84
Visual Area (m2/ft2) 2.4 / 25.8 (nominal)
Water Area (m2/ft2) 1.3 / 14.0
Mooring Details
Minimum recommened anchor
size (kg/lbs)
Wet weight: 1300 / 2866
Recommened mooring mass
(kg/lbs)
Minimum: 250 / 551
Maximum: 600 / 1323
Physical Characteristics
Material Rotationally-moulded UV-stabilized virgin polyethylene oat section, tower
assembly and top marks.
316-grade stainless steel xtures.
Wall Thickness (mm/inches) 13 / ½
Ballast (kg/lbs) 490 / 1080 (external steel)
Overall Height (mm/inches) 5200 / 204¾
Width (mm/inches) 1400 / 551/8
Mass with Ballast(kg/lbs) 907 / 2000 (depending on payload)
Radar Reector Echomax EM230
Product Life Expectancy >20 years
Certications
Quality Assurance ISO9001:2008
Intellectual Property
Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd
Warranty * 5 years
Lantern Options Sealite SL-C310, SL-C410, SL-C415, SL-C420, SL-125 Series or SL-155 Series
Options Available • Mould-in graphics
• Monitoring Systems (AIS, GSM)
TRIDENT-1400 Navigation Buoy
The TRIDENT-1400 is a rotationally-moulded navigation buoy with a oat diameter of 1.4 meters
and lantern focal height of of at least 2.7 meters.
The oat section of the TRIDENT-1400 is built from two (2) rotationally-moulded sections,
which fasten together to form an incredibly robust 1.4 meter wide oat section. Each hull
section is moulded from UV-stabilized, virgin polyethylene, and has a 13mm wall thickness.
Each section is lled with closed-cell polyurethane, which prevents the ingress of moisture in
the unlikely event of damage.
•Specications subject to change or variation without notice
*Subject to standard terms and conditions
Latest products and information available at www.sealite.com
6
TRIDENT-1400
1400mm dia. Navigation Buoy
TRIDENT-1400 Product Components
Item No. Description Qty. ED No.
1 Top Mark Small Can 1 000101-001
1 Top Mark Small Cone 1 000101-002
1 Top Mark Small Sphere 1 000101-103
4 SLB1400D Top Mark Post 1 000101-104
M8 X 40 U Bolt, Nuts and Washers 1 000101-117
M10 X 100 Bolts, Nuts, Washers and Spring Washers 2000101-118
7SLB1400D Tower 1 000101-107
M10 X 16 Bolts, Washers and Spring Washers 5000101-119
M10 X 100 Bolts, Nuts, Washers and Spring Washers 16 000101-120
M10 X 70 Bolts, Nuts, Washers and Spring Washers 16 000101-121
9SLB1400D Ladder 1 000101-109
10 SLB1400D Float 2 000101-110
Float Bush 16 000101-111
15 SLB1400D Post Post Assembly 1 000101-112
M12 X 90 Bolts, Nuts, Washers and Spring Washers 8 000101-122
11 SLB1400D Mooring Bush 4 000101-116
21 SLB1400D Guard Rail Tube Plate 1 000101-106
Latest products and information available at www.sealite.com
7
TRIDENT-1400
1400mm dia. Navigation Buoy
Figure 2. Top Mark
Latest products and information available at www.sealite.com
8
TRIDENT-1400
1400mm dia. Navigation Buoy
Assembly Instructions
Check Components
Unpack all components from container. Inspect all components for damage. Please alert Sealite if any
component is missing or damaged.
Assembly Instructions
Step 1
Position one of the oat halves on its curved face on a rm at surface. Chock each side of the oat to
prevent it from rolling.
Step 2
Position the mooring post in the three large grooves along the length of the oat. The at end of the
oat half should be at the base end of the mooring post. (The shallow tapered end will rest under the
mooring post deck plate).
Secure the oat halves together using 8xM12 Bolts, nuts and washers. With each connection place
a at washer on the bolt before sliding it through the hole in the oat section, then t a second at
washer and a spring washer on to the bolt before securing with a nut.
Please coat each bolt in Anti-seize or molybdenum disulphide grease before tting nuts.
Figure 3.
Figure 4. Figure 5.
Latest products and information available at www.sealite.com
9
TRIDENT-1400
1400mm dia. Navigation Buoy
Step 3
Lift and secure the tower assembly onto the mooring post. The tower should be positioned with the
ladder at the middle point of the two lifting eyes.
Secure the tower to the deck plate in 16 places using M10x70mm long bolts, at and spring washers
and nuts.
Please coat each bolt in Anti-seize or molybdenum disulphide grease before tting nuts.
Step 4
Fit the top mark assembly to the tower. Fix to the tower shelf in 3 places using M10x16mm long bolts
and spring washers. Fix the post to the guard rail assembly using one 8mm x 40 U-Bolt, plain washers,
spring washers and nuts.
Step 5
Lift the buoy only using the lifting eyes on the mooring post deck.
Figure 6.
• DO NOT USE THE GUARD RAIL AS A LIFTING POINT
• DO NOT USE THE TOP MARK AS A LIFTING POINT.
• DO NOT USE THE LADDER AS A LIFTING POINT
• DO NOT USE SOLAR PANELS AS A LIFTING POINT.
• ONLY USE A SLING AROUND THE BODY OF THE TOWER
TO MOVE INTO POSITION
Latest products and information available at www.sealite.com
10
TRIDENT-1400
1400mm dia. Navigation Buoy
Mooring Table
Water Depth
Range
(m)
Target
Water Depth
(m)
Total Weight of Mooring
Accessories including
Chain (kg)
Counterweight
(kg)
Sinker Wet
Weight
(kg)
< 10 5 (min) 800 483.2 1300
10 – 20 10 818 483.2 1300
20 – 30 20 818 483.2 1300
30 – 40 30 840 483.2 1300
> 40 40 785 483.2 1300
50 (max) 960 483.2 1300
Inhaltsverzeichnis
Beliebte Sicherheitssystem Handbücher anderer Marken
Swann
Swann SW-P-MC2 Bedienungsanleitung
Ecolink
Ecolink Siren+Chime Bedienungsanleitung
Digital Monitoring Products
Digital Monitoring Products XR150 Bedienungsanleitung
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
