SealMaster SP 300 Bedienungsanleitung
ATTENTION:
PRE-CHECK ALL LUG NUTS
To be sure your new SealMaster SP 300 or SP 575 Machine operates as designed:
Pre-Check all lug nuts, and fasteners to be sure they are tight and didn’t loosen
during transit. Also, check hoses for damage or leaks to be sure no damage
occurred during transit.
After 8 hrs. of Machine operation, all wheel lug nuts are
to be re-torqued to 110-foot lbs.
WALK AROUND INSPECTION
Before each day, walk around the machine and inspect for leaks, loose or
missing parts, damaged parts, or parts out of adjustment. Perform all
recommended daily maintenance.
REMEMBER:
ONLY YOU CAN PREVENT INJURY TO YOURSELF AND OTHERS!
SAFETY IS YOUR RESPONSIBILITY!
3
S:\Engineering\13-Operator Manuals\Current\SQUEEGEE_575_V3.0_OCT_2023.docx
SP575 SQUEEGEE AND DUAL/SPRAY SQUEEGEE
Owner’s Manual
Version 3.0
Issue Date: October 2023
Effective Date: August 2020
Version
Date
Changes
Approval
1.0
Original Issue
2.0
5/20
New Format and Updates
DS
2.1
10/20
Plumbing Updates
JG
2.2
11/21
Transmission Part No.
JG
2.3
1/22
Change Engine Oil –Note
JG
2.4
4/22
Added Paint Page
JG
2.5
6/22
3” Butterfly Valve
JG
2.6
8/22
Added P70003GA
JG
2.7
5/23
Added P70021C008
JG
2.8
7/23
Attention Pre-Check all lug nuts
JG
2.9
10/23
Added P77000B040 Skid Foot
JG
3.0
10/23
Added P472A029
JG
Table of Contents
CORRESPONDENCE ................................................................................................................................................3
SealMaster® LIMITED WARRANTY .........................................................................................................................4
INTRODUCTION .....................................................................................................................................................5
SELF-PROPELLED SQUEEGEE AND DUAL / SPRAY SQUEEGEE MACHINE...................................................................5
SAFETY PRECAUTIONS AND CAUTIONS ..................................................................................................................6
PRECAUTIONS............................................................................................................................................................6
CAUTIONS..................................................................................................................................................................6
CHECK IT OUT ............................................................................................................................................................7
KNOW YOUR MACHINE.............................................................................................................................................7
FIRE PREVENTION......................................................................................................................................................7
DRESS FOR SAFETY ....................................................................................................................................................8
LEARN TO BE SAFE.....................................................................................................................................................8
PRE-CHECK ALL LUG NUTS.........................................................................................................................................9
WALK AROUND INSPECTION.....................................................................................................................................9
TRAFFIC CONTROL.....................................................................................................................................................9
OPERATION INSTRUCTION SQUEEGEE SP575.......................................................................................................10
BEFORE STARTING ENGINE .....................................................................................................................................10
TO START ENGINE....................................................................................................................................................10
TO OPERATE MACHINE ...........................................................................................................................................10
FILLING MATERIAL TANK.........................................................................................................................................11
OPERATING WATER FOG NOZZLE ...........................................................................................................................12
SQUEEGEE APPLICATION OF SEALER.......................................................................................................................12
MACHINE PARTS LIST SQUEEGEE SP575...............................................................................................................13
PARTS LIST...............................................................................................................................................................13
MACHINE MAINTENANCE ....................................................................................................................................19
MAINTENANCE SCHEDULE ......................................................................................................................................19
TROUBLESHOOTING GUIDE.....................................................................................................................................20
TANK CAPACITY CHART........................................................................................................................................ 21
MATERIAL DEPTH AND GALLON VOLUME ..............................................................................................................21
KUBOTA GAS ENGINE PARTS LIST ........................................................................................................................ 22
PARTS LIST FOR 1605 GAS ENGINE..........................................................................................................................22
WIRING CHART SP575 & SP575 DUAL ..................................................................................................................23
WIRING FOR ENGINE-IGNITION-HYD. COOLER-FAN RELAY & WATER ....................................................................23
HYDRAULIC FLOW CHART........................................................................................................................................24
PLANETARY GEAR HUB............................................................................................................................................25
OPERATION INSTRUCTION SP575 DUAL/SPRAY ................................................................................................... 26
2
BEFORE STARTING ENGINE .....................................................................................................................................26
TO START ENGINE....................................................................................................................................................26
TO OPERATE MACHINE ...........................................................................................................................................26
FILLING MATERIAL TANK.........................................................................................................................................28
OPERATING WATER FOG NOZZLE ...........................................................................................................................29
SQUEEGEE APPLICATION OF SEALER.......................................................................................................................29
MACHINE PARTS LIST SP575 DUAL / SPRAY .........................................................................................................30
PARTS LIST...............................................................................................................................................................30
SANDPUMPER II...................................................................................................................................................38
PARTS LIST...............................................................................................................................................................39
OPERATION INSTRUCTION SANDPUMPER II ........................................................................................................41
GENERAL OPERATION & SERVICE INSTRUCTIONS - REPAIR: ...................................................................................41
SUCTION STRAINER .................................................................................................................................................41
CHECK BALLS ...........................................................................................................................................................41
TROUBLESHOOTING GUIDE.....................................................................................................................................42
DISASSEMBLY-ASSEMBLY DIAPHRAGMS SANDPUMPER II ................................................................................... 43
1. CHANGING THE DIAPHRAGMS: ......................................................................................................................43
2. CHANGING THE DIAPHRAGMS: –ACTUATOR ROD ........................................................................................44
CHECK BALL ASSEMBLY SANDPUMPER II ............................................................................................................. 45
1. SERVICING THE CHECK BALLS: ........................................................................................................................45
2. SERVICING THE BOTTOM CHECK BALLS..........................................................................................................45
SQUEEGEE SP575 DUAL/SPRAY............................................................................................................................46
FILLING THE TANK FROM ANOTHER CONTAINER....................................................................................................46
APPLICATION –SPRAY WAND .................................................................................................................................47
APPLICATION –SPRAY BAR .....................................................................................................................................48
WATER FLUSH .........................................................................................................................................................48
HYDRAULIC SPRAY BAR OPTIONAL ......................................................................................................................51
PARTS LIST...............................................................................................................................................................51
HOW TO WINTERIZE YOUR EQUIPMENT ..............................................................................................................52
RECOMMENDED SPARE PARTS LIST ..................................................................................................................... 53
LIST FOR: GAS ENGINES...........................................................................................................................................53
LIST FOR: SQUEEGEE MACHINE SP575 & SP575 DUAL/SPRAY................................................................................53
MAINTENANCE AND STORAGE ............................................................................................................................54
MAINTENANCE........................................................................................................................................................54
STORAGE .................................................................................................................................................................54
3
ThorWorks Industries, Inc.
Purchased by __________________________ Model NO. _______________________
Company Name _______________________ Serial NO. _______________________
Address ________________________________ Acceptance Date ________________
City _____________ State______ Zip _______
CORRESPONDENCE
All Correspondence regarding this equipment, as well as general correspondence should be addressed to:
ThorWorks Industries, Inc.
PO Box 2277
Sandusky, OH 44870
In referring to the equipment, kindly state the Model Number, Serial Number and any part number involved
`
4
SealMaster® LIMITED WARRANTY
SealMaster warrants that its products are of quality material and workmanship. SealMaster
agrees to replace, within a period of one (1) year from date of delivery, or at its option, repair,
without charge, any part of their manufacture which proved defective. The repair or
replacement will be free of charge F.O.B. Sandusky, Ohio, providing the damaged part or parts
are returned, freight prepaid, to SealMaster and investigation shows such repair or
replacement is made necessary by an inherent defect of material or workmanship.
It is hereby understood that engines, motors, pumps, or other components purchased by
SealMaster for use on its equipment are not warranted by SealMaster and are sold only with
the standard warranty of the manufacturer of that component.
SealMaster will make no allowances for repairs or alterations completed by outside sources
unless authorization is in writing and approved by an authorized SealMaster representative.
Any claims for defective material or workmanship must be made prior to the expiration of thirty
(30) days from the date failure occurs, and in all cases prior to the expiration of the warranty
period of one (1) year. It is the intent of this paragraph to limit SealMaster’s liability solely to
the cost of replacement parts, F.O.B. factory, or at the option of SealMaster to repair of the
defective part or parts. No allowances for damages, lost time, or any other claim will be
recognized.
This warranty is null and void if other than genuine SealMaster parts are used.
SealMaster is constantly striving to improve their products. Changes in design and
improvement will be made whenever the manufacturer believes the efficiency of the product
will be improved, without incurring any obligation to incorporate such improvements in any
machines which have been shipped or are in service.
In an effort to continue to improve product quality, SealMaster reserves the right to change
specifications without notice.
Any modification or alteration of this machine without prior approval of the manufacturer may
void this warranty.
5
SQUEEGEE AND DUAL / SPRAY SQUEEGEE MACHINE
INTRODUCTION
SELF-PROPELLED SQUEEGEE AND DUAL / SPRAY SQUEEGEE MACHINE
SealMaster® self-propelled seal coating machines and buggies set the industry
standard for ride on seal coating equipment.
SealMaster offers both self-propelled ride on squeegee machines and self-
propelled ride on the dual squeegee and spray seal coating equipment.
SealMaster self-propelled seal coating machines are designed to mix and apply
pavement sealers with or without sand.
SealMaster self-propelled seal coating machines have set the seal coating
equipment industry standards for quality, performance, and durability for over
40 years.
6
SAFETY PRECAUTIONS AND CAUTIONS
PRECAUTIONS
•Always wear eye and ear protection, and gloves.
•Be aware of all CAUTION - WARNING - DANGER signs on the unit.
•Read all Owners Manuals that come with this unit.
•Daily check the Engine oil levels.
•Refer to Owners Manuals for proper types of oils.
•Make sure the operator is familiar with the units’ operation.
•Replace any hoses that show signs of wear, fraying, or splitting.
•Be sure all fittings and joints are tight and leak proof.
•Do not do maintenance work on the unit while in operation.
•The unit should not be left unattended when running.
CAUTIONS
•Keep hands, feet, and clothing away from moving parts.
•Do not operate the machine without all guards in place.
•Do not point the spray applicators at another person.
•Do not operate the machine, in an enclosed building or confined
area.
7
SAFETY PRECAUTIONS AND CAUTIONS
CHECK IT OUT
Know what protective devices your machine is equipped with and see that
each item is securely in place and operating condition.
For example:
1. Warning Decals
2. Guards
3. Material hose connections and protective sleeve
4. Grounding wires
KNOW YOUR MACHINE
Have all of the repairs been made that you reported? The most minor
malfunction could be the result of more serious trouble.
FIRE PREVENTION
Avoid fire hazards such as:
1. Always stop the engine when refueling, do not refuel while smoking
or when near an open flame or sparks.
2. Always wipe up any spills immediately.
3. Batteries produce explosive gases, keep open flame or sparks away.
4. Remove all trash or debris from the machine, make sure that oily
rags or other flammable materials are not stored in or on the
machine.
5. Check for fuel, engine oil, and hydraulic leaks, replace worn or
damaged hoses.
6. Inspect electrical wiring for worn or damaged insulation, replace as
needed.
Andere Handbücher für SP 300
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere SealMaster Spritzpistole Handbücher
