Seaory S21 Gebrauchsanweisung
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
Quick User Guide
Seaory S21 Desktop Single-side Card Printer
Shenzhen Seaory Technology Co., Ltd.
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
1. Unpacking and inspection
Input hopper cover
If the above accessories are in short supply, please contact your local distributor
immediately.
3) Appearance introduction:
1PC USB cable
1PC power cable
1PC weight module
1PC cleaning roller
5pcs cleaning card
1PC warranty card 1PC cleaning stick
1PC ICARDE software CD
Input hopper cover
LCM screen
Air vent
In
p
ut ho
pp
e
r
Output
ho
pp
e
r
Control panel
buttons
Switch of upper
cover
Input hopper cover
Status indicator
lamp (Green)
Power switch
Interface: Ethernet
Interface: USB
Power
Defective card slot Single card manual
feeding mouth
1) Open the top cover , you will see following items:
Accessories box
Output hopper
PE foam
S22 card printer
2) Accessories list:
1PC output hopper
1PC power adapter
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
2. Cleaning Roller Installation
.
3. Ribbon Installation
4.Take the cleaning roller’s both
sides by hand. After pushing into
the mounting position, gently
press down.
2.Open upper cover, take
out the ribbon cartridge.
3. Remove 3M hyaline
layer on cleaning roller
surface.
The purpose of the cleaning wheel is to absorb the dust on the card and improve the
printing effect. Replace cleaning roller after every roll of ribbon use up.
1. Gently lift the upper
cover switch.
Ribbon cartridge
1. Open the upper cover, take
out the ribbon cartridge, install
the ribbon into the cartridge
according to the color direction.
2.Red roller supply with unused ribbon.
White roller supply with used ribbon.
3.
Take ribbon cartridge’s side, Red
roller close to the Back-end card exit
mouth, install the ribbon cartridge.
In order to ensure the normal use of the printer, please use Seaory original ribbon.
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
4. Place the card, Add the weight module
„
5. Adjust the thickness of card feeding entrance
„
1.Open the input hopper
dust cap.
2.Place the card into the input
hopper, then add the weight
module.
3.Install the input hopper dust cap.
1. Open the upper cover.
2.Move the yellow lever to
adjust the feed card thickness.
3.Support 0.3mm to 1.0mm
thickness cards. Factory preset
thickness is 0.8mm.
The feed card thickness needs to be adjusted according to the card’s actual thickness . Like
when it’s 0.76mm standard card, the feed card thickness can be set at 0.8mm. If the card feed
thickness value is set too high, it is easy to enter two cards at the same time; if it is set too small,
it is easy to fail to enter the card.
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
6. Output Hopper Installation
7. Driver installation
2.Installation finished.
1. Attach output hopper to the hole where the
arrow
p
oints.
1.Power adapter 24V connector is inserted into card
printer power interface. Connect the power cable to the
power adapter. Then plug the power cable into the mains
socket. But do not power on until the driver installation is
co
m
p
l
ete
.
2. Connect the square port of the USB
cable to the card printer and connect the
flat port to the USB port of the computer.
3.Use CD-rom or download the driver installation
package on the Seaory's official website, double-
click above driver installation package.
4.Click “Install”.
Please install driver by administrator and close all antivirus applications before installation.
The card slot is used to connect printed cards, please keep it
properly
.
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
5. Begin to install, please wait for a while. 6. During the installation process, when the above page
appears. Please select always trust software from
“Shenzhen Seaory Technology CO., LTD ” in the pop-up
windows, then click the “Install” button.
7. Wait for one minute, this page appears,
click "finish".
8.Turn on power switch, then the driver will be install
automatically. After installation, please click “Control
panel – Hardware and sound – Devices and printers”
then you can find Seaory S21 was installed completely.
Seaory S21 desktop card printer quick user guide
Excellent quality, Perfect service www.seaory.com
8. Driver setting
9. Print test
After all the above steps are completed, relevant software can be used to print and test the card printer. You can
also do print test through Seaory's " iCARDE " software. For details, please refer to Seaory iCARDE manual.
Please refer to the operation manual for detailed setting of the driver.
1. In "devices and printers", right click on the
printer named "Seaory S21" and select "print
preferences".
2. Enter the printing preferences setting page.
Andere Handbücher für S21
2
Inhaltsverzeichnis
Andere Seaory Drucker Handbücher
Seaory
Seaory R300 Bedienungsanleitung
Seaory
Seaory S20 Technisches Handbuch
Seaory
Seaory S20 Bedienungsanleitung
Seaory
Seaory S22K Betriebsanleitung
Seaory
Seaory R600M Betriebsanleitung
Seaory
Seaory S26 Technisches Handbuch
Seaory
Seaory S20R Technisches Handbuch
Seaory
Seaory S22K Technisches Handbuch
Seaory
Seaory S20 Gebrauchsanweisung
Seaory
Seaory R300 Betriebsanleitung
Seaory
Seaory S25 Gebrauchsanweisung
Seaory
Seaory R600 Technisches Handbuch
Seaory
Seaory S21 Technisches Handbuch
Seaory
Seaory R600M Technisches Handbuch
Seaory
Seaory S22K Bedienungsanleitung
Seaory
Seaory S22 Technisches Handbuch
Seaory
Seaory S22F Technisches Handbuch
Seaory
Seaory S22 Gebrauchsanweisung
Seaory
Seaory S22 Bedienungsanleitung
Seaory
Seaory S20R Gebrauchsanweisung
