Sears 917.285230 Bedienungsanleitung

MODEL NO.

917.285230

,_UTION:

Read Rules for

Safe Operation

and instructions

Carefully

®Assembly

o Operating

® Maintenance

® Repair Parts

Prinled in U S A

_GUARANTEE _

Your Shredder-Bagger is guaranteed for one fuji year. If any defect in material or workmanship should

appear during this time, simply contact our nearest Sears store or service center throughout the United

States or Conoda_ We will make all necessary repairs, including parts and labor, at no charge to you. If the

Shredder-Bagger is used for commercial or rental purposes, this guarantee applies for thirty days.

SEARS, ROEBUCK AND CO. SIMPSONS-SEARS LTD

IMPORTANT

RULES FOR SAFE OPERATION

1 Children must never be allowed to operate this

SHREDDER_BAGGER.

2. It is recommended that the operator of this

SHREDDER-BAGGER obtain and wear safety

glasses at all times.

3 Operator should become fully familar with all

of the different sections of this Owners Manual

and the Engine Manual before attempting to

operate the SHREDDER-BAGGER,

4o Never allow your hands, any other part of your

body, or your clothing inside the hopper, leaf

ramp, discharge chute or near any moving parts,

while the engine ;s running.

5 The shredding blades are "directly connected to

the engine crankshaft, therefore when the engine

is running the blades are always turning.

14.

15_

16.

17_

6_ Always stand clear of the discharge area when

operating the SHREDDER-BAGGER; never re- 18_

move the discharge deflector and always keep

it at a downward angle as this limits the un-

controlled expulsion of shredded material from 19o

the unit at high speeds.

7_ Never remove the hopper guard at anytime and

be sure that it is in a closed position at all

times when the SHREDDER-BAGGER is in

operatlon_

8_ Never start or operate this SHREDDER-BAGGER

without the hopper or leaf ramp fully secured in

the proper position.

20_

2I_

9. Keep your face and body back from the hopper

opening in order to avoid the bounceback of

material from the hopper_

10_ When feeding shreddable materials into your

SHREDDER-BAGGER be extremely careful

that pieces of metal, rocks, bottles, cans or

other foreign materials are not inadvertantly

placed in the SHREDDER-BAGGER.

¼" in diameter dowel or plasterlng lath; never

use your hands, large pieces of wood, thick

plastic material or the like

Do not allow an accumulation of shredded

material in the discharge area as this will

prevent proper discharge,

This SHREDDER-BAGGER should be operated

only upon a level surface to prevent tlpping_

The spark plug wire must be disconnected from

the spark plug to prevent accidental starting.

The engine of this SHREDDER-BAGGER must

be allowed to cool down before making any

inspection, adjustments or repairs to the unit.

Never run the SHREDDER-BAGGER indoors

as the exhaust from the engine contains carbon-

monoxide which is a tasteless, odorless, dead-

ly poison

Always disconnect the spark plug wire each

time the engine is stopped_

If your SHREDDER-BAGGER should start

making an unusual noise or abnormallyvibrat-

ing, immediately stop the engine and removethe

spark plug wire. The unit should then be fully

checked far loose parts or damage to assure

continued safe operation of the unlt_

Never fill the gasoline tank of your SHREDDER

BAGGER while the engine is running or while

it is hot. All spilled or excess gasoline should

be wiped up prior to starting the engine -gaso-

line is highly flammable and must be handled

with extreme care°

All screws, nuts and bolts must be kept tight

to be sure that the SHREDDER-BAGGER is

in safe operating condition, Also, the engine

must be kept clean of all dirt and other ac-

cumulations in order ta prevent damage tothe

engine.

11. The SHREDDER-BAGGER should never be

operated in the vicinity of children, pets or

other persons_

12_ Avoid wearing loose fitting clothing and make

sure you are wearing protective footwear while

operating the SHREDDER_BAGGER.

13, Do not overload the hopper of this SHREDDER-

BAGGER, however, in the event it becomes

necessary to push material into the hopper, use

only a soft 3-faot lanai piece of wood such as a

1434R-3,5_71

22_

23v

-I-

The governor settings on this SHREDDER-

BAGGER must not be altered, changed or

tampered wlth_ The governor controls the maxi-

mum safe operatlng speed of the SHREDDER-

BAGGER and protects the engine from damage_

When storing the SHREDDER-BAGGER, it must

be kept in a place where gasoline fumes will

not reach an open flame or spark. For long

periods of storage, the gasoline tank should be

drained and the gasoline discarded in a safe

place. The engine must always be allowed to

coal down before storing in any enclosure.

reference drawing for assembly and instructions

REAR RIGHT

HAND

SIDE

FRONT

LEFT

HAND

SIDE

1. Handle

2. Fuel Tank and Cap

3_ Starter Handle

4. Air Cleaner

5_ Speed Control Knob

6_ Engine Pad

7. Mill Housing

Fig. 1

8. Spark Plug and Cover

9. Discharge Area

10. Deflector

11. Hold Down Knob

12. Hopper

13, Guard

1434R-3_5,71 - 2-

introduction

Your new SHREDDER-BAGGER utilizes multiple

sharp flat cutting blades rotating about the vertical

shaft of its engine within the mill housing_ In order

to reduce lawn and garden bulk by shredding, these

blades rotate at a speed of approximately 14,000

feet per minute or almost 158 miles per hour_ They

exert about the same force as a 7_ pound sledge

hammer traveling at 158 miles per hour and shred

materials by simply cutting and forcing them at this

speed against the internal breaker plates_ Ob-

viously, this extreme force constitutes a potential

danger if the SHREDDER-BAGGER is not properly

used and maintained_ It is therefore all the more

important that the operator always FOLLOW THE

"RULES FOR SAFE OPERATION" as well as

other instructions contained in the Owners Manual

and the Engine Manual

This SHREDDER-BAGGER has been designed,

engineered and manufactured to give you the best

passible dependability and performance. Should you

experience any minor problem which you cannot

easily remedy, please return your SHREDDER-

BAGGER to your nearest Sears, Roebuck and Co_

or Simpson-Sears Limited store_ They have well-

qualified, competent trained technicians and the

proper tools to service or repair this unit. NEVER

ATTEMPT TO REPAIR YOUR SHREDDER-BAGGER

UNLESS YOU ARE FULLY QUALIFIED TO DO SO.

assembly

A letter in parentheses in the following instructions

refer to an arrow in an adjoing Figure (Illustration),

unless otherwise stated. When R.H. (Right Hand) or

L.H. (Left Hand) are used, it should be understood

to mean from a position standing at the front (handle)

end and facing the Shredder-Baggel. Refer to Fig_ t.

D o

FIG, 2

L434R-3, 571

-3-

Cut all wires which fasten Shredder-Bagger to

wood pallet in bottom of shipping cartom Remove

all parts from the inner carton in which this

Owners Manual was found_ All hardware; bolts,

nuts, washers and E-rings which are referred

to in the following instructions were shipped in

a plastic bag.

Position and assemble deflector (A), to engine

pad (B), and mill housing (C), with two 3/8 x

truss head machine screws, Iockwashers and hex

nuts (D)_ Heads of machine screws to inside.

Deflector (A), must be positioned as shown to

deflect shredded material downward. Tighten

nuts securely.

Position handle (E), to hopper (F), as shown,

and align holes_ Secure handle to hopper with

four truss head slotted machines screws ¼ x¾,

Iockwashers and hex nuts (G), Head of machine

screws to outside. Tighten nuts securely.

ONE SIDE OF WHEEL

HUB IS CONVEX. THIS

SURFACE OF BOTH

WHEELS TO INSIDE.

FIG, 3

Tip shredder forward until shredder rests on

front portion of hopper and deflector_

Position holes in ground pad (H), over weld

bolts in bottom of mill housing (C)_ Secure with

two 3/8 Iockwashers and hex nuts (J). Tighten

nuts securely.

Position holes in axle bracket (K), over weld

bolts in bottom of mill housing (C). Secure with

two 3/8 Iockwashers and hex nuts (L). Tighten

nuts securely°

Refer to Fig. 3 for correct positioning of wheel

on axle. Slide a flat washer (M), and a wheel

(N), ovel one end of the axle (P). Secure an

E-ring (R), in the groove near end of axle. Now

slide axle through the hole in one end of axle

bracket (K). Flat washer will be between wheel

and axle bracket. Push axle through opposite

hole in axle bracket. Assemble second flat

washer, wheel and E-ring

instructions before operating

KEEP 5CREWS_ N UT5

AND BOLTS TIGHT---

SPEED CONTROL DECAL

STARTER HANDLE

FUEL TANK CAP

NEVER OPERATE THE SHREDDER-BAGGER

IN WET GRASS, MUDDY, UNEVEN OR ROUGH

TERRAIN. ALWAYS BE SURE OF YOUR

FOOTING.

FILL ENGINE CRANKCASE

I. Refer to Fig. 7 for location of oil filler plug.

Be sure area around plug is clean.

2. Remove oil filler plug. Insert a small neckfun-

nel in opening and fill crankcase with M_S:

S_A_E, 30 oil_ If not available, use Multi-Grade

All-Weather oil SoA_E. 10W-20W-30W. Use All-

state oil or equivalent_ Capacity 1-1/2 pints (24

ounces), In cool spring or fall weather (under

40°F_) All-Weather oil will produce easier

starting_ Replace oil filler plug_

3, Change oll after first 2 hours of operation and

every 25 operating hours thereafter. Check oil

every 8 operating hours° Refer to **Engine Lub-

rication", pages 7 and 8o

FILL FUEL TANK

1, Refer to Fig. 4 for location° Be sure area around

fuel cap is clean and remove cap. Fill fuel tank

with a good grade of clean, fresh "regular"

gasoline. Do not use gasoline that has been

stored for any great length of time or has been

sitting in some old gas can for a long while°

Capacity--1 quarh

WIPE UP ALL SPILLED FUEL OR OIL,

TO START ENGINE

], To start a cold engine, move speed control knob

to "start" position,

2, Grasp recoil starter handle and pull sharply,

Do NOT allow starter rope to snap back, Rewind

slowly keeping hold of the starter handle at

all times

3 After engine starts, move speed control knob to

"fast" position,

SPEED

CONTROL

KNOB

FIG. 4

TO STOP ENGINE

1. To stop engine, move the speed control knob to

the "stop" position.

KEEPCktlLI)REbl,PEOPLE

AFtt)PETSMAY.._

1434R-3°5_71_ - 4 -

preface to operating

There are enumerable ecological and gardening applications for your powerful new SHREDDER-BAGGER_ Probably

your initial use of this unit will be to substantially reduce lawn and garden bulk by shredding it and bagging it for

disposal pick-up_ Air pollution ordinances in many areas have made it illegal to burn this bulk, however your SHRED-

DER-BAGGER will allow you to dispose of it properly.

Another prime use for your SHREDDER-BAGGER will be in the preparation of a compost pile. Shredding accelerates

the decomposition process, This is a very valuable asset to every gardener in that it provides an excellent source of

sol[ which is relatively rich in plant food and high in organic contenL Compost is of special value for potting house

plants, use in greenhouses, gardens and the like. Some other uses are for flower beds, rose beds, and as atop dress_

ing for [awns_ The ingredients which go into the preparation of a compost pile vary depending upon the materials

available, but they usually consist of sod, grass clippings, weeds, leaves, corn stalk, discarded vegetable greens

such as carrot tops, etc. Many local libraries have fine books on gardening and flower bed preparation and main-

tenance dealing with the preparation of compost piles which will apply to your particular climate, soil conditions and

use for the compost pile.

In order to make your SHREDDER-BAGGER a more versatile piece of equipment, Sears offers the following access.

sories:

1, Lawn Cleanup Cart

2, Bagging Attachment

operating

BE AWARE OF ALL THE "RULESFOR SAFE OPERATION" LISTED

CAUTION ON PAGE I°

3. Leaf Ramp

4. Extra*heavy plastic Bags

6. After the engine starts, normally move the con-

trol knob to '°fast °' position, However, with a

brand new engine, we suggest that the control

knob be positioned midway between the '°slow"

and "fast '° setting--½ to ¾ throttle for the first

15 minutes of running at no load, for engine

breakim

7. To stop engine, move the control knob to the

'°stop '° position.

8. DISCONNECT SPARK PLUG WIRE.

SHUTOFF ENGINE AND REMOVE

SPARK PLUG WIRE WHEN NOTIN

U SE- EVEN FOR AIdOI'dENT

OPERATE OH A

LEVEL SURFACE ONLY

1. Position the Shredder-Bagger on level ground.

2. Fill engine crankcase and fuel tank as described

on page 4.

3. Attach spark plug cover and wire to spark plug.

Refer to Fig_ 4, page 4o

4, Move control knob to "start" position.

5, Grasp recoil starter handle and pull sharply.

Do NOT allow starter rope to snap back. Re-

wind slowly keeping hold of the starter handle

at all times_ Several pulls of the starter may be

necessary to start the engine for the first time or

after it has set idle for a peroid of time, in

order to pump fuel from the tank to the car-

buretor,

1434R-3 5 71

PUT ON YOUR SAFETY GLASSES,

Your Shredder-Bagger was designed for optimum

operation at full "fast °' throttle_ Keep guard, at

top, rear end of hopper in the closed position at

all times_ Be sure discharge chute deflector is

angled downward so that all shredded material is

diverted to discharge toward the ground_

-5-

operating

Stalks, long heavy weeds, small diameter branches,

etc can be hand fed into the hopper so that the rate

of feed can be controlled to prevent stalling of the

engine However, when this material becomes so

short so as to be level with the top of the hopper,

let go and the material will feed itself Do NOT

extend hands beyond the top of the hopper,

USE A SMALL

5TIC.K TO PUSH "_k'/

MATERIAL { IqTO

HaPPieR .... _-

Should it become necessary to push the material

down inside the hopper, use only a soft 3 foot long

piece of wood such as a _" diameter dowel or

plastering lath, Keep face away from hopper open-

ing to avoid bounceback of materials.

D0 NOq ALLOW MA'TEP-,IAL TO COLLEGT

AT OUTLET. _.

From time to time, it will be necessary to remove

the shredded material from the discharge area so

that it will not obstruct the flow of other material

being shredded in the mill housing and discharged

from the discharge chute. When doing this, stop the

engine and remove the spark plug wire° Then rake

the shredded material to one side before replacing

the spark plug wire and re- starting the engine. In

the event a bagging attachment is being used, the

engine should be stopped and the spark plug wire

removed prior to detaching the bag from the bagging

attachment, The new bog should be put into place

before replacing the spark plug wire and re,starting

the engine.

DANGER: WHEN PUTTING MATERIAL IN

YOUR SHREDDER-BAGGER BE SURE THAT

IT DOES NOT CONTAIN METAL, ROCKS,

CANS, BOTTLES OR OTHER FOREIGN MAT-

ERIAL.

It is possible to feed heavy material (corn cobs,

prunlngs, wet leaves, grass clippings, etc.), too

fast so as to load up the hopper and stall the

engine. It will take experience to determine ;he

proper rate of material feed into the Shredder for

best performance,

It is not necessary to shred aIt material to a uni-

form size, REMEMBER,the main purpose of the

Shredder is to reduce the bulk.

1434R-3_5,71 -6-

operating

FLOW OF MATERIAL OBSTRUCTED

BLADE

MILL

HOUSING

DISCHARGE

AREA FIG. 5

1. Move engine control knob to "stop '_ position to

shut- off engine.

2. Disconnect spark plug wire.

3. Remove the hopper, refer to Fig_ 6=

4_ Use a stick or small board to clean out mill

housing and discharge area.

5. Replace hopper_

6. Reattach spark plug cover and wire to spark

plug and start engine_

maintenance

HOPPER REMOVAL

1. Remove spark plug cover and wire (A), from

spark plug.

2_ Unscrew and remove hopper hold down knob (B)

3. Lift and tilt hopper (C), to the right so that

hopper clears weld pin (D)o Now pull hopper

(C), to the left to disengaged weld pins (E and

F), from holes (G and H), in engine pad and

discharge separator.

HOPPER REASSEMBLY

1. Lift and tilt hopper (C), into position as shown

in Fig. 6. Insert weld pin (F), into round hole(H),

of engine pad, now pivot hopper until weld bolt

(E), enters slot (G), of discharge separator_

2. Lower hopper until hole in lower left hand side

of hopper engages weld pin (D). Secure in place

with hopper hold down knob (B),

ENGINE LUBRICATION

DISCONNECT SPARK PLUG WIRE AT SPARK

PLUG.

CHANGE OIL AFTER FIRST 2

HOURS OF OPERATION. THERE-

AFTER, CHANGE OIL EVERY 25

_NGIt_EOtLHOURS OF OPERATION_

CHECK OIL LEVEL REGULARLY--AFTER

EACH 8 HOURS OF OPERATION_ STOP

ENGINE, DISCONNECT SPARK PLUG WIRE

AT SPARK PLUG AND WAIT SEVERAL MIN-

UTES BEFORE CHECKING OIL LEVEL.

L_H. SIDE

FIG. 6

1434R-3.5,71

R_H°

SIDE /

SHREDDER MUST BE ON

WHEN CHECKING OIL LEVEL

LEVEL GROUND

BE SURE OIL LEVEL IS MAINTAINED.

NOTE: THE BEST TIME TO DRAIN OIL IS AT

THE END OF A DAY'S OPERATION AT

WHICH TIME THE OIL IS HOT AND ALL DIRT

AND FOREIGN MATERAIL IS SUSPENDED IN

THE OIL,

-7-

maintenance

SERVICE INSTRUCTIONS

The torque of the mandrel nut _s VERY CRITICAL.

If nut is tightened too tight, clutch will not slip and

should some foreign object enter the milt housing,

extensive damage could occur to the mandrel, blades

and engine

It is probable that the blades will never need sharp-

emng We STRONGLY RECOMMEND that should

any repairs or adjustment be required to the mandrel,

blades or engine (requiring removal of the mandrel

nut), that the Shredder-Bagger be returned to your

Sears store or service center for inspection and

servloeo

FIG 7

Remove hopper, refer to page 7.

Remove oil filler plug while engine is warm

Certain normal owner maintenance must be per.

formed to obtain longest life and trouble free use

of your engine° Servicing of the air cleaner re-

gularly is of the upmost importance° Refer to the

engine manual for information regarding the air

cleaner, carburetor and spark plug°

HOW TO CLEAN

FIG, 8

3, Tip Shredder on its side as shown in Fig, 8.

DRAIN ALL USED OIL COMPLETELY, and

wipe up any oil that has collected on the Shred-

der_

4. Sit Shredder upright and refilt engine crankcase

with oil as instructed on page 4. Replace off

filler plug. Wipe up any spilled oil.

5 R'eplace hopper, refer to page 7,,-z-.,....-----,,_

KEEP GASOLINE IN AN AP-

PROVED, TIGHTLY SEALED

CONTAINER. NEVER FILL

SHREDDER-BAGGER FUEL

TANK INDOORS-

1434 R- 3.5 71

When you ere through operating the Shredder for the

day, flush out the residue that has collected inside

the machine. Run some water into the hopper with a

garden hose while the engine is running at "slow"

speed CAUTION: Do NOT place hose inside the

hopper. Avoid getting water on engine. Shut-off

engine and disconnect spark plug. Tip the Shredder

to allow excess water to drain out the discharge

area. Clean the engine, refer to engine manual.

STORAGE

In the event your Shredder is to be inoperative for

periods in excess of 30 days--prepare for storage as

outlined below:

1. Stop engine, disconnect spark plug and allow

engine to cool dowm

2. Completely dean inside and outside of Shredder

3_ Refer to engine manual for engine storage in-

structions.

4. Apply a light coat of grease or rust preventative

to hopper, blades and inside walls of mlJl

housing.

5. Store in a clean, dry building.

6. Do not save or store gasoline over winter,

-8-

repair parts 3.5 H.P. SHREDDER-BAGGER

MODEL NUMBER 917.285230

THESE ITEMS TO BE RE-

PLACED BY A SEARS SERVICE <

TECHNICIAN ONLY.

THE LETTER ABOVE THE HARDWARE

INDICATES THAT ITEM AND ANY BE-

LOW IT ARE USED IN THE LOCATION

IN THE MAIN DRAWING WHERE THE

IDENTICAL LETTER APPEARS.

EACH ITEM OF HARDWARE MUST BE

ORDERED INDIVIDUALLY.

_31

lED32 .=_33

I_J34

IIZI]37

1434R-3.5.71

.:=:=:=17

1_337

Inhaltsverzeichnis

Andere Sears Aktenvernichter Handbücher

Sears

Sears 917. 270181 Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung