SECO-LARM DH-151SQ Bedienungsanleitung





Magnetic Door Holders

Manual

For use with door closers to control the

release and closing of residential,

commercial, and public area doors

Adjustable armature plate reduces

installation time and adjusts to door

alignment changes

Surface-mount or flush-mount

models available

Fail-safe operation

Low profile design

Holding force – 33-lb (15kg)

3 voltages: 12/24 VAC/VDC, and 120VAC

Cast aluminum faceplate

No residual magnetism for easy release

Built-in voltage spike suppressor

Optional extension bars available:

1", 2", 3", 4", 5", 6", 7"

Use with SECO-LARM door closers

SD-C121-S, SD-131-SQ, SD-C101-SGQ,

SD-C101-SBAQ, or SD-C101-SBBQ

Features:



DH-151SQ Surface-mount

DH-171SQ Flush-mount

DH-151SQ DH-171SQ

SECO-LARM Magnetic Door Holders

2SECO-LARM U.S.A., Inc.



Introduction:

The SECO-LARM Magnetic Door Holders are designed for virtually any remote door release

applications. The UL Listed SECO-LARM Magnetic Door Holders, used in conjunction with

UL Listed SECO-LARM door closers, control the release and closing of residential, commercial,

and public area doors including apartments, schools, hotels, hospitals, and offices. Fail-safe

operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.

SECO-LARM Magnetic Door Holders also come in surface-mount or flush-mount models with full

mounting hardware included.

Model DH-151SQ DH-171SQ

Installation Surface-mount Flush-mount

Current draw

52mA@12VAC, 60mA@12VDC

27mA@24VAC, 31m@24VDC

24mA@120VAC

Holding force 33-lb (15kg)

Magnet box dimensions 23/4"49/16"x3"

(70x116.5x76 mm)

23/4"x49/16"x21/16"

(70x116.5x52 mm)

Door armature dimensions 29/16"x29/16"x 19/16" (65x65x40 mm)

Magnet box weight 1-lb 6.4-oz (920g) 1-lb 1.5-oz (468g)

Door armature weight 8.1-oz (230g)

Operating voltage 12 VAC/VDC, 24 VAC/VDC, 120VAC

Specifications:

Parts List:

1x Door holder 1x Armature plate 1x Manual

2x Jumpers 2x 5*15 Machine screws 2x #10*11/4" Wood screws

4x 4*8 Machine screws 2x 3*10 Machine screws 1x Back box*

1x 1" Extension bar 1x Extension bar wrench

Wiring Diagram:

For 12VAC/VDC For 24VAC/VDC For 120VAC

Voltage

Selector

Jumper

(‐)(+)(‐)(+)(‐)(+)

COM12V24V120V

COM12V24V120V

COM12V24V120V

Available Accessories: Extension Bars

DH-100E-05SQ 1/2" (13mm) DH-100E-20SQ 2" (50mm) DH-100E-50SQ 5" (127mm)

DH-100E-07SQ 3/4" (19mm) DH-100E-30SQ 3" (76mm) DH-100E-60SQ 6" (152mm)

DH-100E-10SQ 1" (25mm) DH-100E-40SQ 4" (102mm) DH-100E-70SQ 7" (178mm)

* DH-151SQ only

SECO-LARM Magnetic Door Holders

SECO-LARM U.S.A., Inc. 3





 

Installation:



Voltage Settings:



Set the voltage using the jumpers as in the diagram.

NOTE: Factory default is 120VAC. To avoid personal injury or damage to the product, ensure that

the jumper setting matches the wiring connections (See “Wiring Diagram:” on page 2) and the

supplied voltage. Improper settings/wiring will void the warranty and SECO-LARM will not be

responsible for any resulting injury.

Volta

e Selector Jumper

Wiring Terminals:

(See "Wiring Diagram:" Pg. 2)

1. Determine mounting location of both the Magnetic Door Holder and the Armature Plate. Run

the power wires to that location in compliance with any local codes.

2. Select the voltage (two jumpers for 12VAC/VDC, or a single jumper for 24VAC/VDC or

120VAC) for the Door Holder (See "Voltage Settings:" below) and adjust the jumpers.

3. For the DH-151SQ (Surface-Mount Magnetic Door Holder):

a. Mount the back box to the location where your wires are run and connect the wires

according to the wiring diagram on page 2.*

b. Finish screwing down the unit to the back box and test the unit.

4. For the DH-171SQ (Flush-Mount Magnetic Door Holder):

a. Connect the wires according to the wiring

diagram on page 2.*

b. Finish screwing down the unit to the single-

gang box and test the unit.

5. Mount the Armature Plate to the door and make

sure it lines up with the door holder (Extensions

available if needed, See pg. 2).

6. Double check all connections and mountings to

make sure the installation is complete.

*IMPORTANT: The wiring connections must match the

voltage jumper settings and the supplied voltage.

Door Holder

Door Armature

12 VAC/VDC 24 VAC/VDC

120VAC

SECO-LARM Magnetic Door Holders

4SECO-LARM U.S.A., Inc.





DH-151SQ:



Dimensions:



NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM

reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks

rights reserved.

LIMITED WARRANTY:

This SECO-LARM product is warranted against defects in material and workmanship while

used in normal service for two (2) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to

the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty

is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair o

alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-L

RM determines that such

equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole

obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at

SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential

personal or property damage of any kind to the purchaser or anyone else.

SECO-LARM®U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA, 92606 Website: www.seco-larm.com

PITVW2

Phone: (949) 261-2999 | (800) 662-0800 Email: sales@seco-larm.com

MI_DH-1x1SQ_171229.docx

Armature:



Front

(

65mm

)

(

65mm

)

Side

(40mm)

Door Installation

(40mm)

(44mm)

(65mm)

Magnet:



(26mm)

DH-171SQ:



Back

(26mm)

Side

(52mm)

Front

(116.5mm)

(70mm)

Side

(76mm)

(85mm)

(45mm)

(51mm)

Dieses Handbuch passt für folgende Modelle

Beliebte Haushaltswaren Handbücher anderer Marken

Kallista

Kallista Per Se P77618-00-CP Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks FLEETWOOD M2-5099 Montageanleitung

Miele

Miele APFD 203 Bedienungsanleitung

norix

norix ATN-RR01K Bedienungsanleitung

Dorma

Dorma ES61 Bedienungsanleitung

Stratco

Stratco Gutters Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks X1-3091 Montageanleitung

BLUM

BLUM CLIP Konfigurationshandbuch

Safe

Safe SC 809 Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks M1-5122 Montageanleitung

Lefroy Brooks

Lefroy Brooks K1-5311 Montageanleitung

Lefroy Brooks

Lefroy Brooks M1-5103 Montageanleitung

Safe

Safe SafeGate SC 907 Bedienungsanleitung

Lefroy Brooks

Lefroy Brooks X1-3001 Montageanleitung

Kvadrat

Kvadrat Ready Made Curtain Bedienungsanleitung

TESA

TESA Powerstrips 59782-00000-00 Bedienungsanleitung

hawa

hawa Telescopic 40/4 Technisches Handbuch

Griffwerk

Griffwerk 417 Installationsanleitung