Seco SYS-B68-IGW Kurzanleitung

SYS-B68-IGW

INSTALLATION, USE AND WARNINGS MANUAL

SYS-B68-IGW 
Information subject to change. Please visit www.seco.com to find the latest version of this manual. 
Page.1 of 16 
 
 
 
 
 
1Preliminary information........................................................................................................................................2 
1.1 Device description............................................................................................................................................2 
1.2 Recipients ............................................................................................................................................................3 
1.3 Warranty...............................................................................................................................................................3 
2Identification.............................................................................................................................................................4 
2.1 Manufacturer identification..........................................................................................................................4 
2.2 Device identification........................................................................................................................................4 
2.3 Device identification plate.............................................................................................................................4 
3Technical specifications.........................................................................................................................................5 
3.1 SYS-B68-IGW device hardware specifications ......................................................................................5 
3.2 Software Specifications ..................................................................................................................................7 
3.3 Reference directives ........................................................................................................................................7 
4Safety devices ...........................................................................................................................................................9 
4.1 Warnings..............................................................................................................................................................9 
4.2 Safety pictograms affixed to the device............................................................................................... 10 
5Characteristics and components of the device ........................................................................................11 
5.1 Measurement layout....................................................................................................................................11 
5.2 Components....................................................................................................................................................12 
6Installation...............................................................................................................................................................14 
6.1 Permitted environmental conditions.....................................................................................................14 
6.2 Installing the device......................................................................................................................................15 
6.3 Versions available..........................................................................................................................................17 
 

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.2 of 16

1Preliminary information

1.1 Device description

The SYS-B68-IGW device is a single board computer enclosed in a metal box with a heat sink.

The SYS-B68-IGW device integrates a single standard NUC board based on the eighth

generation Intel® Atom, Pentium® and Celeron® family of System-on-Chips (SOC) previously

coded as Apollo Lake, a series of SOC Dual / Quad with a set of 64 bit instructions.

The technology developed by SECO S.p.A. for the SYS-B68-IGW device can be used and

applied in various fields, such as:

Robotics

Edge

Computing

Digital Signage

Infotainment

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.3 of 16

1.2 Recipients

This manual is intended for ordinary people and installers (expert users).

1.3 Warranty

The warranty shall be voided in the event of:

•

failure to comply with safety regulations;

•

tampering with the device;

•

changes to the safety conditions established by the Manufacturer in the device

management software;

•

improper use of the device;

•

use of the device by untrained and/or unauthorised personnel or failure to respect

duties, as indicated in the manual;

•

changes or repairs carried out by the user without written authorisation from the

Manufacturer;

•

partial or total failure to comply with the instructions;

•

defects in the mains power supply (electricity, power supply, etc.);

•

poor maintenance;

•

use of non-original spare parts;

•

exceptional events such as floods, fires (if not triggered by the device).

The complete warranty terms are set out in the sales contract.

Important! The Manufacturer is not liable for improper use of the device.

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.4 of 16

2Identification

2.1 Manufacturer identification

MANUFACTURER SECO S.P.A.

Via Achille Grandi n°20

52100 Arezzo –Italy

Address Tel: +39 0575 26979

Fax: +39 0575 350210

2.2 Device identification

Device

SYS-B68-IGW

Serial number

YYMMXXXXX

Year of manufacturing

2020

2.3 Device identification plate

The device is equipped with an identification plate located on the side. The plate features the

device identification information to be reported to Seco S.p.A. if necessary, as shown in the

table:

SYS-B68-IGW-XXXX-1XXX-I3

IGW - Code that identifies the Client.

SYS-B68-IGW-XXXX–1XXX-I3

XXXX–1XXX - Code that identifies the electronic

board

inside the device (reference page 14).

SYS-B68-IGW- XXXX-1XXX-I3

I3 –Code that identifies the temperature range and

revision index of the device.

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.5 of 16

Caution! It is strictly forbidden to remove the identification plate and/or replace it

with other plates.

3Technical specifications

3.1 SYS-B68-IGW device hardware specifications

The table below features the board hardware specifications:

Processor

Intel® Pentium® N4200 Quad Core @1.1GHz (burst 2.5GHz),

2MB L2 Cache, 6W TDP

Intel® Celeron® N3350 Dual Core @1.1GHz (burst 2.4GHz),

2MB L2 Cache, 6W TDP

Intel® Celeron® J3455, Quad Core @1.5GHz (Burst 2.3GHz),

2MB L2Cache, 10W TDP

Intel® Celeron® J3355, Dual Core @2.0GHz (Burst 2.5GHz),

2MB L2Cache, 10W TDP

Memory

Quad Channel soldered down LPDDR4 memory, up to 8GB

Graphics

Integrated Intel® HD Graphics 505 or 500 series controller,

with up to 18 Execution Units

4K HW decoding and encoding of HEVC(H.265), H.264, VP8,

SVC, MVC

Dual independent display

Screen Section

Two multimode Display Port on miniDP++ connectors

Mass Storage

Optional eMMC drive onboard

Optional SATA M.2 SSD module up to 512GB

Network connection

2 x Gigabit Ethernet ports

M.2 Socket 2 Key B Slot for Modem modules (alternative to

M.2

SSD), connected to internal microSIM Slot

M.2 Socket 1 Key E Slot for WiFi/BT modules

USB

2 x USB 3.0 Type-A sockets on Front Panel

2 x USB 2.0 Type-A sockets on Rear Panel

Audio

Internal HD Audio codec Cirrus Logic CS4207

Mic In and Line Out Audio jacks

Other interfaces

Power Button

Power On Status LED

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.6 of 16

Electrical Power Supply

DC Power jack, with cable restraint,

type DC-062-4-2.5-S214

+18VDC ÷ +32 VDC recommended

Min power required, 40W

Operating System

Preinstalled OS (factory options):

Microsoft Windows 10 IoT entry

Linux Ubuntu 64-bit

Available on request:

Wind River Linux (64-bit)

Yocto (64-bit)

Android (planning)

Optional Accessories

miniDP++ to HDMI adapter

Customised bracket for wall mount

Operating

temperature in user

environment

0°C ÷ +60°C**

Humidity

5% ÷ 85%

Type of installation

Fastening with screws

Attention! **The values indicated refer to the maximum temperature of the

environment of use of the device. It is the customer’s responsibility to verify that the

temperature remains within the admissible range indicated in this manual and, if

necessary, adopt any passive cooling solution together with an application-dependent

cooling system that can ensure that the heat sink temperature will not damage the

device itself and/or the connected mechanical parts.

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.7 of 16

3.2 Software Specifications

BIOS B6I FLASH software version released on the website https://www.seco.com/it/sys-

b68-igw.html , which is always updated and available, even in later versions.

3.3 Reference directives

SECO S.p.A. places the device on the market, equipping and providing it with:

CE marking

Declaration of Conformity

FCC - Part 15 Certification*

ISED Certification**

* (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

** This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.8 of 16

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts

de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Ce dispositif a été conçu pour fonctionner avec les antennes fournies avec ce produit. L’utilisation

d’autres antennes peut enfreindre les règles industrielles du

Canada et annuler l’autorité de l’utilisateur quant au fonctionnement de l’équipement.

This device complies with RSS-210, ICES-3(B)/NMB-3(B)

Please also note that the device has been designed according to the following Directives:

2014/30/EU Electromagnetic Compatibility Directive

2014/53/EU (RED) (Where applicable, depending on the versions)

- 2012/19/EU (WEEE)

- 2011/65/EU (RoHS)

SYS-B68-IGW

Information subject to change. Please visit www.seco.com to find the latest version of this manual.

Page.9 of 16

4Safety devices

4.1 Warnings

Caution! It is the user’s responsibility to apply preventive and protective measures,

in accordance with the legislation of the country of installation and use of the device.

Caution! Only use CLASS 2 power supply with double isolation output and

LPS

operation (see EN 60950-1 clause 2.5) or ES1 PS2 output (see EN 62368-1) as per

reference Standards:

•

EN 62368-1

•

EN 60950-1

Caution! Only connect certified peripherals / devices to the device.

Important! Operations on the device must be carried out by specialized and

authorised personnel only.

Caution! Always disconnect the electrical power supply before carrying out any work

on the device.

Caution! Check that the electrical voltage meets the values indicated in this manual

before connecting the device.

Caution! Disconnect the device from any power source before cleaning.

Caution! Do not use liquid detergents or sprays for cleaning the device.

Caution! Do not pour liquids of any kind on the device. This may cause fires and/or

electric shocks.

Caution! Keep the device away from exposure to moisture values outside the

admissible range indicated in this manual.

Caution! The device must always be fixed to a machine before proceeding with any

type of operation and/or use.

Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to the instructions.

Inhaltsverzeichnis

Andere Seco Einplatinencomputer Handbücher

Seco

Seco SBC-C61 Bedienungsanleitung

Seco

Seco SYS-C31-DMV Gebrauchsanweisung

Seco

Seco EASYSHRINK EVO Bedienungsanleitung

Seco

Seco SYS-B68-IPC Kurzanleitung

Seco

Seco SBC-C43 Bedienungsanleitung

Seco

Seco THEMIS Bedienungsanleitung

Seco

Seco SBC-C20 Bedienungsanleitung

Seco

Seco SBC-984 Bedienungsanleitung

Seco

Seco SECOnITX-ION Bedienungsanleitung

Seco

Seco SBC-C31 Bedienungsanleitung

Seco

Seco SBC-C41-pITX Bedienungsanleitung

Seco

Seco ETX-A61 Bedienungsanleitung

Seco

Seco SBC ADLER Bedienungsanleitung

Seco

Seco SANTINO LT core Bedienungsanleitung

Seco

Seco TANARO Bedienungsanleitung

Seco

Seco i-PAN7 Bedienungsanleitung

Seco

Seco SBC-C23 Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung