Sector Alarm PhoneWatch TC Bedienungsanleitung
User Manual
Alarm system: PhoneWatch TC
Welcome to PhoneWatch
Our user manual is designed to support you in the daily use of your
alarm system. We recommend that you read the manual in order to
fully understand how your alarm works.
We look forward to keeping you safe for many
years to come with our alarm system and
monitoring service.
Over the first few pages, you will find a brief
description about how your alarm works.
You can get in touch with our customer service
team at any time if you have any questions.
Tel: 1850 753 753
Remember to always arm your
alarm!
Customer service team
PhoneWatch
Floors 3-5, Block 1
Irish Life Centre
Lower Abbey St.
Dublin 1
Telephone: 1850 753 753
www.phonewatch.ie
2 PHONEWATCH
Customer number
Easy-to-use alarm system
The following will give you information about the most important
functions of your alarm.
Full Arm mode (arms the entire alarm system)
Press the button Full Arm mode and enter your personal code or
place the keytag over the keytag reader symbol on the keypad.
Press the button Full Arm mode on the remote control.
Part Arm mode (arms part of the alarm system*)
Press the button Part Arm mode and enter your personal code
or place the keytag over the ketyag reader symbol on the keypad.
Press the button Part Arm mode on the remote control.
Disarm the alarm system:
Enter your personal code or place the keytag over the keytag reader symbol on the
keypad.
Press the Disarm button on the remote control.
*Part Arm mode is programmed according to your needs. Your PhoneWatch Engineer can
program the alarm according to your preferences.
EASY-TO-USE ALARM SYSTEM 3
Content
Images from the camera detector 5
How to use the keypad 6
Signal lights on the keypad 7
How to use the alarm system 8–11
Arming using the keypad 8
Arming using the remote control 9
Disarming using the keypad 10
Disarming using the remote control 10
Siren and sound 10
Door signal on/o 11
Maintenance and advice 15
4 CONTENTS
Panic alarm function 11
Information about the most common alarm components 12–13
Smart solutions 14
Images from the camera detector
The following clause defines how images should be processed when
transferred within systems equipped with one or more detectors with
cameras installed.
• Images will only be transferred to our Alarm Receiving Centre in the event of an alarm
activation.
• The images will be used solely as aids in the management of alarm activation. In other
words, in order to evaluate and determine the cause of an activation.
• Only the Alarm Operators, and if needed Garda authorities, will have access to the
images received.
IMAGE PROCESSING CLAUSE 5
How to use the keypad
The keypad is used to arm or disarm the alarm system by means of a
personal code or keytag. The keypad is equipped with
a keytag reader at the bottom-centre.
Signal light 1
Alarm triggered
Signal light 2
System error
Keytag reader
SOS Panic
Alarm function
Full Arm mode Part Arm mode
6 HOW TO USE THE KEYPAD
Signal light 3
Tamper alarm
Signal lights on the keypad
There are three signal lights on the front of the keypad. These
indicate the current status of the alarm system.
Signal light 1 – alarm triggered
On: The alarm system has been triggered or one of the detectors is unable to be
armed. This could be because a door or window protected with a magnetic contact
sensor is open.
Flashing: There is an alarm activation in the alarm system’s memory which needs to
be reset.
O: The alarm system is ready to be armed.
Signal light 2 – system error
On: An error has occurred in the alarm system. This could be due to a problem with the
battery, power supply or because of a problem with sensor monitoring, an error with the
GSM/GPRS or interferences. Contact customer service for assistance.
Flashing: There is an error in the alarm system’s memory which needs to be reset.
O: The system is free of errors.
Signal light 3 – tamper alarm
On: A tamper alarm has been triggered in the system. This could be due to failure or
sabotage. Contact customer service for assistance.
Flashing: There is a tamper alarm in the alarm system’s memory which needs to be
reset.
O: The system is free of tamper alarms.
Resetting
You can reset the alarm system by entering your personal code or using your
keytag. If there are various alarm activations triggered in the system memory,
you will need to repeat the rearming process until LED lights 1, 2 and 3 are
all switched o.
HOW TO USE THE KEYPAD 7
SECTOR ALARM – DOMONIAL USER INSTRUCTIONS 4
How to use the alarm system
The alarm system is easy and convenient to operate using the
keypad, remote control or keytag.
Arming using the keypad
Full Arm mode (arms the entire alarm system)
Close all of the exterior doors and windows before arming the system.
Press the button Full Arm mode and either enter your personal code or use
your keytag.
The signal light 1 will light up and flash to confirm the command before switching o
again.
A warning alert will sound for a moment as you leave. In the case of a system error,
a warning tone will be emitted. You should rectify the system error and then try to
arm the system again.
Part Arm mode (arms part of the alarm system*)
Close all of the exterior doors and windows before arming the system.
Press the button Part Arm mode and either enter your personal code or use
your keytag.
The signal light 1 flash until the alarm is armed.
No warning alert will sound as you leave (If set to Part Arm silent). In the case of a
system error, a warning tone will be emitted. You should rectify the system error and
then try to arm the system again.
*Part Arm mode is programmed according to your needs. Your PhoneWatch Engineer can
program the alarm according to your preferences.
8 HOW TO USE THE ALARM SYSTEM
Arming using the remote control
Keep in mind that the remote control arms the system instantly. You should therefore be careful
not to arm the alarm until you are outside of the protected zone.
Full Arm mode (arms the entire alarm system)
Close all of the exterior doors and windows before arming the system.
Press the button Full Arm mode.
The button confirmation light will light up for a few seconds to confirm arming. In the case of
a system error, you will need to rectify the error and then try to arm the system again.
Part Arm mode (arms part of the alarm system*)
Close all of the exterior doors and windows before arming the system.
Press the button Part Arm mode.
The button confirmation light will light up for a few seconds to confirm arming. In the case of
a system error, you will need to rectify the error and then try to arm the system again.
Check status
To check the status of the system you press the status button with question mark and
the button of the current panel status will light for a few seconds.
*Part Arm mode is programmed according to your needs. Your PhoneWatch Engineer can
program the alarm according to your preferences.
Panic Alarm function
Full Arm mode
Disarm button
Part Arm mode
Status button
HOW TO USE THE ALARM SYSTEM 9
SECTOR ALARM – DOMONIAL USER INSTRUCTIONS 4
Disarming using the keypad
Disarm
The entire system will be disarmed, regardless as to whether it was in Full Arm mode or
Part Arm mode.
Enter your personal code or use the keytag.
The system light 1 will switch o.
When somebody enters the property, the system will generate a sound to indicate that
it is necessary to disarm the alarm system.
Disarming using the remote control
Disarm
The entire system will be disarmed, regardless as to whether it was in Full Arm mode or
Part Arm mode.
Press the Disarm button.
The LED confirmation light will light up for a few seconds to confirm the command.
When somebody enters the property, the system will generate a sound to indicate that it is
necessary to disarm the alarm system.
Siren and sound
When an alarm is triggered the siren will sound. The sound will be generated from the smoke
detectors and indoor sirens if fitted.
You will have two dierent sounds depending on the type of alarm.
If the sound is constant, there has been a burglar alarm or a panic alarm
If the sound is pulsing, the system has detected smoke - - - - - - -
10 HOW TO USE THE ALARM SYSTEM
Inhaltsverzeichnis
Andere Sector Alarm Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung